AutoCAD Civil 3D :: Can't Use Import / Export Under Planning And Analysis
Aug 12, 2013I get this message FDO provider 'OSGeo.SHP.3.8' everytime I try to import polylines into shapefile format.
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Planning And Analysis Workspace
Sep 24, 2013I have access to the educational version of Autocad Civil 3D 2014. I am familiar with the program, but unfortunatley I can't access the Planning and Analysis Workspace in the workspace pulldown menu. Infact I can't find it anywhere. How I can download it? Or even customize my own tab so that I have a similar layout to the planning and analysis workspace
View 4 Replies View RelatedAutoCAD Civil 3D :: Export / Import Surface Analysis
Sep 7, 2011Within the UKIE Country Kit there is a lsp that exports/imports Surface elevation Analysis data (attached lisp file)
Is it possible to be modified so that a Slope analysis is exported/imported and how easy/difficult it is to do (or even make the alterations themselves!).
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: Export Parcel Analysis To Show Degrees Minutes And Seconds Instead Of Default Decimal Degrees
May 18, 2012How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
AutoCAD Civil 3D :: Import / Export Layer Filters?
Jun 20, 2008Notice that the import / export Layer filters is missing in 2009?
View 9 Replies View RelatedAutoCAD Civil 3D :: Import / Export Custom Assemblies Palette?
Apr 13, 2012I recently made a custom Tool Palette that contains all of our most commonly used Assemblies in our office on my PC. I then exported the Paleette to a location on our network and tried to import it onto another workstation. The Palette imported correctly and all of the assemblies are visible. However, when an assembly is attempted to be inserted into a drawing nothing is inserted.
Upon insertion the properties menu box shows up indicating that it is closed or locked..."do you wish to continue".
Is there a step that I am missing on importing or exporting of assemblies or Palettes?
AutoCAD Civil 3D :: Missing Import / Export Styles On Ribbon
Nov 8, 2013I'm trying to import some label and table styles from another drawing and can't seem to do it. I followed the tutorial offered here until I got to the "Manag" ribbon in my Civil 3D and found that the Styles "import Export" option is not there.
View 9 Replies View RelatedAutoCAD Civil 3D :: Import / Export List Of Metric Annotation Scales For Use In Another Drawing?
May 15, 2012Using Civil 3D 2012, is there a way to import/export a list of metric annotation scales for use in another drawing?
View 4 Replies View RelatedAutoCAD Map 3D :: (SSA) Storm And Sanitary Analysis - Import From Industry Model
Aug 12, 2013Using Storm and Sanitary Analysis from a wastewater industry model? I have been looking into that but have run into a problem regarding units (using metric units). When importing data from wastewater industry model into SSA it assumes that pipe dimensions are given in meters and subbasins area are given in ha. My data is in mm and sqr.m.
Can I define what units to use when importing this data??
If I import GIS data (shp files) I can define what units the data is in.
Using 2013 versions of Map and SSA.
AutoCAD Civil 3D :: Export Profile Chainage And Level As Text To Import Into Hydrology Software
Nov 18, 2013I need cross section information of a creek for a Hydrology program (DRAINS in Australia) and need to extract this from a surface I have created in Civil 3D. I require the Chainage and Level for a profile which represents the creek cross section at several specific locations. The information is essentially the data bands in a Profile which I can create, however I cannot see how to obtain this information in a form I can use.
the format of the data can be copy and pasted into Excel from which I can directly import the information into the software.
AutoCad :: Create 2x4 Ceiling Grid Hatch For Layout Planning
May 2, 2012I'm trying to create a simple 2x4 ceiling grid hatch for layout planning, but AutoCAD keeps giving me an error when I try to use it.
Here's the custom hatch that I wrote at the very end of the acad.pat file:
*CGRID, 2x4 grid
0, 0,0, 0,48
90, 0,0, 0,24
When I load up ACAD, it shows the hatch in the selection, but after I've defined the area and I try to apply the hatch, I get this error in the command line:
Missing parameter on line 385.
AutoCAD Civil 3D :: River Analysis DWG
Jul 6, 2012Am working in River Analysis dwg and go to save and get message "One or more objects cannot be saved to the specified format."
What's the deal?
AutoCAD Civil 3D :: River Analysis Documentation?
May 20, 2013Where can we find documentation or tutorials on the River Analysis package as it is with IDSU 2014?
We are in the middle of a few projects using BOSS's RiverCAD but with the new 2014 License files we can no longer use the AutoCAD 2010 that ran with RiverCAD.
So, I'm scrambling to get my user up and running with River Analysis and how (if possible) to port our RiverCAD projects to River Analysis with as little pain as possible.
I have to admit, I don't use RiverCAD and have not yet installed IDSU 2014. (I'm making the deployment now).
I'd really like to ditch having to support AutoCAD 2010 and RiverCAD....
[URL] .......
AutoCAD Civil 3D :: Surface Volume Analysis
Jan 3, 2014I have a large 200+ acre site that I have created a volume surface and analyzed it using the elevation banding with color to show different levels of cut and fill. The owner has broken this area into 10 different irregular zones. Is there a way to do the elevation banding of a volume surface and have it color the individual parcels. They don't all have to be at once. I can do each one at a time and PDF the drawing.
View 2 Replies View RelatedAutoCAD Civil 3D :: Simple Pipe Analysis
Apr 3, 2012how do I use Civil 3D to do basic pipe analysis computations? For example, I give it the slope, material, etc. and it spits out the flow velocity, flow depth, slope min, etc.
All I want for now is a basic tool for sizing pipes without all the bells, loops & whistles. I can learn the fancy pipe networking stuff later.
AutoCAD Civil 3D :: Slope Analysis - Ranges Set To 10
Oct 12, 2006I can not get the slope analysis to come up with 10 slope ranges. My ranges are set to 10, but my Range details populate to 22? Screen Cap included. I've tried this with Equal Interval, Quartile, and Standard Deviation. Nothing will create 10 intervals.
My "slope analysis" surface style is set to show Slope, with the range set to 10. In surface properties, my range is set to 10.
AutoCAD Civil 3D :: Exporting Surface Analysis
Jul 11, 2013We have an "original" existing surface of a ditch, a massive ditch. dredging has taken place and now we have a new existing surface of the ditch. the client wanted to see the delineation between the areas that are now 3" lower, 6" lower and 9" lower (and so on). I was able to do this easily with elevation banding. now the client would like some sort of GPS uploadable based on the color map that shows the banding. How to accomplish this without having someone set there and set points along the different colors on the surface. that is going to be incredibly time consuming. is there an automated way to export the data that I am looking for?
View 7 Replies View RelatedAutoCAD Civil 3D :: Surface Analysis And Transparency
Nov 6, 2013It appears color transparency for surface analysis is now broke in 2013. It used to work in 2011 because I use to bring in Lidar data and run elevation analysis over top of aerial photos. I never found any type of resolution. Is Autodesk aware and are they working on this?
This issue reminds me of the Point Cloud issue with Lidar data right after 2013 came out. It worked in 2011 just fine and then 2013 they broke it. After calls to autodesk support and thread exchanges plus several months of waiting, service pack 2 for 2013 fixed the lidar classification issue.
AutoCAD Civil 3D :: Surface Analysis By Elevation?
Feb 8, 2006I've tried to create a surface analysis by using a point group reading xdata to set the elevations and when I set my surface properties to display the elevation shades it will only allow me to set the range to 5 or less. All of the other analysis settings for direction, slope, and slope arrows allow me to input the nuber of ranges I want, but I need the elevation analysis.
View 5 Replies View RelatedAutoCAD Civil 3D :: Slope Analysis By Direction
Mar 27, 2012I need to be able to do a slope analysis on a surface, but I need to have it calculate the slope in a direction - east and north. Any way to do it? Maybe even if there is a quick way to apply slope labels to a surface based on a grid - say the slope from N0.00, E0.00 to N0.00 to E 25.00
View 9 Replies View RelatedAutoCAD Civil 3D :: Depth Analysis Between Two Surface
Feb 8, 2013 I have two surface ( OG surface and Gravel LIFT ), i need to have a table that Show me Depths range between those two surface with a color range, in a table and also to be able to see it in the the top surface.
Basically, In every Spot of the surface, need to represent a Depth range between the OG and the gravel surface by a specific Color.
AutoCAD Civil 3D :: 3D View Of Elevation Analysis?
Feb 23, 2012I've got an elevation analysis with a nice range of colours in plan which look fine but I want to display this in a 3D view for a presentation.
I selected the object and went to object viewer but I can't get the analysis in colour. I'm guessing I'm missing something obvious but can't figure out what...
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: Peak Flow During Analysis
Mar 2, 2012I am modeling an existing storm system that is under capacity. After running the model, some of the flows seem to be incorrect. I have one section that has a known flow of 1.31 cfs. The results for this pipe section shows 28.82 cfs (peak flow during analysis) and 6.06 cfs (design flow capacity). The pipe section is a 15" with constructed slope of 0.0088 ft/ft. The max velocity attained is 23.48 ft/sec. I know that the downstream is undersized. Could this flow rate be caused by the downstream backflows? The model is setup as hydrodynamic and rational method. My inertial terms are set at ignore, time step = 0, junction surface area = 0 and variable time step with safety factor 75%. I have gutter bypass flows and my sag structures have ponded area set at 100.
View 8 Replies View RelatedAutoCAD Civil 3D :: Slope Analysis Showing On One Computer But Not The Other?
Mar 30, 2012same drawing, two computers both with Civil 3D 2012 SP1.
one computer opens the drawing and the surface analysis by slopes shows perfectly, the othe computer opens same drawing and it shows no slope analysis but everything else. They can even change the style and analysis and can view slope arrows, elevations, etc.
AutoCAD Civil 3D :: Average Elevation For Zoning Analysis?
Nov 8, 2013We have to compute the average elevation along the front, sides and rear of a proposed building envelope to calculate the required set back.
Right now I am setting FL with elevation nodes at the required interval, assigning EG elevation and pasting from the panorama to excel to compute the average.
Is there a way I could create a toolbox report to do this? Maybe even from a profile report?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
AutoCAD Civil 3D :: Hydraulic Analysis For Potable Water
Aug 14, 2012We are being requested by more municipalities to perform a hydraulic analysis on the water system before we can extend water to the site. This is very crude doing it by hand. I have seen different softwares available that run inside of Civil 3D that will perform the hydraulic analysis. How others were performing hydraulic analysis.
View 1 Replies View RelatedAutoCAD Civil 3D :: Surface Analysis Range Colours
Oct 31, 2012Is there a way to automatically adjust the cut range colours (REDS) in the attached scheme such that the lighter colours denote lower cut depths in the same way that the fill range does (Greens)
I know they can be manually adjusted but when the analysis is run again the colours revert back
(No connection with Autodesk other than using the products in the real world)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD Civil 3D :: Default Surface Analysis Type?
Jun 20, 2013I am working on a commercial development with multiple large tenants with multiple standards. To begin to verify the preliminary grading is in compliance, I use the slope arrow surface analysis type.
Due to my multiple standards, I find myself changing these values frequently. My question : Is there a way to make the slope arrow the default analysis type when you are in the surface properties dialog box?
I know it is not a major issue, but it is annoying and repetitive, having to go to the list box, and select slope arrow over and over again. One workaround I have considered to avoid this maddening situation is to make two surfaces, with each criteria assigned to the surface properties and simply paste the main surface into each. Then control which is visible based on what I need to look at.
AutoCAD Civil 3D :: Create 3 Hour Storms For Use In SCS Analysis
Sep 17, 2013I need to create 3 hr storms for use in SCS analysis. I created new .pcp files and.cds files. The .cds file has three hours worh of preciptauon ratios establihed by the City I'm working in. The .pcp has the new total inches in the Custom row. The calculations seem to rum OK; but I am getting a negative outflow in the table at the 50 % point (not on the curve). I've looked a the distribution table and there is nothing funny going on around the half way point.
View 1 Replies View RelatedAutoCAD Civil 3D :: Cut And Fill Analysis / Values Different - Corrupted Surface
Jul 10, 2012I was undertaking a cut and fill analysis but the values were very different. Evaluating spot levels the depth was given as 1.2m but the volume surface stated it was only .6m.
After a while I noticed that the master surface had been "corrupted" duing a recovery, all definitions to the controlling corridor and other objects had been removed and a snapshot added with the description "added during recovery".
I had to remove the surface and start from scratch re-building the definitions.
Civil3D 2013 / 2014
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
AutoCAD Civil 3D :: River Analysis Reach Automatically Created
Jul 27, 2013I have the River Analysis tools installed for C3D 2014 and any time I open a drawing, a reach is automatically created in the file. This is really annoying because it puts it down at the coordinates (0,-500) which pretty much makes zoom extents a useless command now.
Is this as designed? If it is as designed, how to turn it off?