AutoCAD Civil 3D :: 3D View Of Elevation Analysis?
Feb 23, 2012
I've got an elevation analysis with a nice range of colours in plan which look fine but I want to display this in a 3D view for a presentation.
I selected the object and went to object viewer but I can't get the analysis in colour. I'm guessing I'm missing something obvious but can't figure out what...
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 2 Replies
ADVERTISEMENT
Feb 8, 2006
I've tried to create a surface analysis by using a point group reading xdata to set the elevations and when I set my surface properties to display the elevation shades it will only allow me to set the range to 5 or less. All of the other analysis settings for direction, slope, and slope arrows allow me to input the nuber of ranges I want, but I need the elevation analysis.
View 5 Replies
View Related
Nov 8, 2013
We have to compute the average elevation along the front, sides and rear of a proposed building envelope to calculate the required set back.
Right now I am setting FL with elevation nodes at the required interval, assigning EG elevation and pasting from the panorama to excel to compute the average.
Is there a way I could create a toolbox report to do this? Maybe even from a profile report?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 9 Replies
View Related
Dec 28, 2012
I have a surface with a bunch of contours. I want to view the contours at elevation 550. In Microstation there is a set display depth command. Is there a tool in autocad where I can view certain elevations.
I want to make layouts/viewports that are clipped to different elevations. For example I have a surface with 5' contours. I want to create multiple viewports on a sheet showing what each contour looks like at its elevation.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 4 Replies
View Related
Oct 31, 2012
I am using LISP in C3D 2012. I am trying to get the station and elevation of a point I pick in a profile view. I found the Method that will get that info, but I can';t seem to get the syntax right.This is the Method;
HRESULT FindStationAndElevationAtXY(
[in] double X,
[in] double Y,
[out] double * pStation,
[out] double * pElevation,
[out, optional] VARIANT * pInBounds
[code]...
View 4 Replies
View Related
May 19, 2013
Need getting pipe top elevation in profile view data band? In labels it's possible to perform calculations via expressions. In data bands – not. Inablity to get pipe outside top elevation in profile view leads to dead end in my hunt for smooth workflow.
View 5 Replies
View Related
Jun 1, 2012
We don not show CL profiles and only show the gutters on the CL profile view. We also do not used profile bands.
I need to show Superelevation on both left and right profiles complete with labeling.
Short of creating a seperate alignment for each, sampling the corridor surface, superimposing it onto the CL profile view and then creating a layout profile by drawing over the sampled surface.
View 2 Replies
View Related
Apr 30, 2013
I have created the super elevation to my road as you can see on the attached picture, but I can't see the super elevation on my section view.
See attached.
View 5 Replies
View Related
Feb 25, 2013
Elevations existing ground gives in the band not the correct value, I putted everything in meters but it still doesn t match with the label that gives the correct elevation, same problem with the offset distance in the band.
View 4 Replies
View Related
Oct 17, 2011
Alignment, profile, assembly and corridor have been setup. i have setup the superelevation calculations and did the super elevation view and it looks right, but for some reason the super elevation won't apply to my section view assemblies or the corridor editor.
View 3 Replies
View Related
Jul 11, 2013
I am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies
View Related
Dec 19, 2012
When I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
View 7 Replies
View Related
Apr 16, 2012
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies
View Related
Jun 27, 2012
I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies
View Related
Dec 6, 2007
Residential custom home design. I come from the good old fashioned background of pencil and paper drafting. Although with the recent technology advances I have migrated to the AutoCAD side of the fence, and loving every minute of it. Upon purchasing a copy of AutoCAD 2004, I continued drafting the way I knew how, lines on paper. I have recently upgraded to AutoCAD 2007, and with no formal training, I am looking in drafting in 3D.
My main question has multiple parts;
What is the best way to draw walls in 3D?
What is the best way to add windows and doors? and is there a way to have the "plan view" relate with the "elevation view"?
How do you go about adding a roof?
I have played around in the isometric views attempting to solve the previous questions, although I have been doing all of it with line work. I know there has to be an easier and more efficient way of going about this....
View 9 Replies
View Related
Sep 14, 2013
Does Frame Analysis uses the finite element method?
If it does, how to view/edit the mesh?
View 4 Replies
View Related
Feb 3, 2011
Can I use AEC Dimension in a Section/Elevation View in ACA? So, when an Wall height changes, the AEC will change too after refresh the section/elevation.
View 1 Replies
View Related
Jul 2, 2012
Is there a way to make 3d view of an object ( say a box) from its plan and elevation? I'm requesting you to all to get a solution.
View 9 Replies
View Related
Aug 23, 2013
I've been using autocad 2012 student version and all the blocks I've used in my dwgs up until now, is blocks I created myself or blocks that I get from someone else. Now, I've been told that autocad comes with a library of blocks in plan and elevation view. How do I access them?
View 9 Replies
View Related
Aug 26, 2011
I placed walls at 12'0" elevation as they wereconflicting with walls below (overlap). I can't see them in plan view - In 3D iso view they are visible.
View 4 Replies
View Related
Mar 22, 2013
can i use the "methods supported" " FindXYAtStationAndElevation" to retrieve a elevation and station from a profile view?
View 4 Replies
View Related
Mar 26, 2011
ACA 2011. I would like to copy the "standard" wall style add a surface hatch and display that in an elevation (exterior) view. I have played around with this and due to many different places to edit the materials.
I have the elevations created. When I go back into the construct and edit the wall style do I have to re-create the elevations to see the hatch? Or I think I just have something set incorrectly in the style.
View 3 Replies
View Related
Jul 6, 2012
Am working in River Analysis dwg and go to save and get message "One or more objects cannot be saved to the specified format."
What's the deal?
View 4 Replies
View Related
May 20, 2013
Where can we find documentation or tutorials on the River Analysis package as it is with IDSU 2014?
We are in the middle of a few projects using BOSS's RiverCAD but with the new 2014 License files we can no longer use the AutoCAD 2010 that ran with RiverCAD.
So, I'm scrambling to get my user up and running with River Analysis and how (if possible) to port our RiverCAD projects to River Analysis with as little pain as possible.
I have to admit, I don't use RiverCAD and have not yet installed IDSU 2014. (I'm making the deployment now).
I'd really like to ditch having to support AutoCAD 2010 and RiverCAD....
[URL] .......
View 1 Replies
View Related
Jan 3, 2014
I have a large 200+ acre site that I have created a volume surface and analyzed it using the elevation banding with color to show different levels of cut and fill. The owner has broken this area into 10 different irregular zones. Is there a way to do the elevation banding of a volume surface and have it color the individual parcels. They don't all have to be at once. I can do each one at a time and PDF the drawing.
View 2 Replies
View Related
Apr 3, 2012
how do I use Civil 3D to do basic pipe analysis computations? For example, I give it the slope, material, etc. and it spits out the flow velocity, flow depth, slope min, etc.
All I want for now is a basic tool for sizing pipes without all the bells, loops & whistles. I can learn the fancy pipe networking stuff later.
View 5 Replies
View Related
Oct 12, 2006
I can not get the slope analysis to come up with 10 slope ranges. My ranges are set to 10, but my Range details populate to 22? Screen Cap included. I've tried this with Equal Interval, Quartile, and Standard Deviation. Nothing will create 10 intervals.
My "slope analysis" surface style is set to show Slope, with the range set to 10. In surface properties, my range is set to 10.
View 9 Replies
View Related
Jul 11, 2013
We have an "original" existing surface of a ditch, a massive ditch. dredging has taken place and now we have a new existing surface of the ditch. the client wanted to see the delineation between the areas that are now 3" lower, 6" lower and 9" lower (and so on). I was able to do this easily with elevation banding. now the client would like some sort of GPS uploadable based on the color map that shows the banding. How to accomplish this without having someone set there and set points along the different colors on the surface. that is going to be incredibly time consuming. is there an automated way to export the data that I am looking for?
View 7 Replies
View Related
Nov 6, 2013
It appears color transparency for surface analysis is now broke in 2013. It used to work in 2011 because I use to bring in Lidar data and run elevation analysis over top of aerial photos. I never found any type of resolution. Is Autodesk aware and are they working on this?
This issue reminds me of the Point Cloud issue with Lidar data right after 2013 came out. It worked in 2011 just fine and then 2013 they broke it. After calls to autodesk support and thread exchanges plus several months of waiting, service pack 2 for 2013 fixed the lidar classification issue.
View 3 Replies
View Related
Mar 27, 2012
I need to be able to do a slope analysis on a surface, but I need to have it calculate the slope in a direction - east and north. Any way to do it? Maybe even if there is a quick way to apply slope labels to a surface based on a grid - say the slope from N0.00, E0.00 to N0.00 to E 25.00
View 9 Replies
View Related
Feb 8, 2013
I have two surface ( OG surface and Gravel LIFT ), i need to have a table that Show me Depths range between those two surface with a color range, in a table and also to be able to see it in the the top surface.
Basically, In every Spot of the surface, need to represent a Depth range between the OG and the gravel surface by a specific Color.
View 4 Replies
View Related
