AutoCAD Civil 3D :: How To Change Invert And Top Elevation To Existing Top Elevation
Apr 16, 2012
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies
ADVERTISEMENT
Sep 7, 2011
I'm creating pipe networks to represent existing utilities and am still a novice of Civil 3D.
I am creating sewer laterals that need to connect to the sewer main that I have already created. My problem is that I can't find a way to find out the invert elevation of the sewer main at the specific point that the sewer lateral will be tying in to. I no longer have an alignment or profile for the sewer main and I hope that I don't have to re-create them. I just want to pick a point on the pipe and have it tell me that vital information. Is there any way that I can do this in plan view?
View 9 Replies
View Related
May 9, 2013
Is there a way to remove the extra (In) and (out) invert elevation from my labels? If the IN or OUT (I.E.) is the same there is no need to label them twice. So, can I remove them? If you can remove them, how do you do it?
This is what I have
NEW CATCH BASIN A-11
TOP=427.30
I.E.(IN)=421.60
I.E.(IN)=421.60
I.E.(OUT)=421.60
View 3 Replies
View Related
Oct 27, 2012
I am analyzing a culvert in a tidal zone which has an outlet invert level below the normal tidal range. The invert level of the culvert outlet is -0.520m, however Hydra flow Express Culverts will not allow a negative invert elevation to be entered.
View 2 Replies
View Related
Jul 11, 2013
I am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies
View Related
Dec 19, 2012
When I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
View 7 Replies
View Related
Jul 5, 2013
When working in a drawing with a surface referenced there is usually a flag attached to the cursor that reveals the surface and the elevation of the spot the cursor is hovering over; mine has disappeared.
View 8 Replies
View Related
Jun 20, 2012
Is there a way for Civil3D to create/generate/extract a contour of a specific elevation such as 105.53 from an existing surface?
View 4 Replies
View Related
Aug 28, 2012
i created section view as in pic1. In Bands, Existing surface elevation labels at existing surface grade breaks, top of road elevation labels at top grade breaks, datum is the same. Can i add existing surface elevation labels at top of road grade breaks? (pic2)
View 7 Replies
View Related
Mar 5, 2012
So we have to adjust the elevation of hundreds of drainage structures from their existing elevation to the new finished ground elevation.I know we can give this information within the structure label by adding a reference surface but we would like to produce a table with three columns:
Structure No. Existing Rim Elev. Proposed Rim Elev.
How to produce such a table?
View 6 Replies
View Related
Apr 12, 2012
I have a bunch (hundreds, so manual input not an option) of X,Y points without elevation data that I would like to import into a DWG and assign an elevation that is based on an existing surface object. Is there a way to do this for a point file? The command for inserting individual points would be the "Create points - Surface > Random" but I don't see a way to do this in a batch type method where i have my PNE formatted input file to just move the points to sit on the existing surface.
View 2 Replies
View Related
Jun 22, 2012
Is there a way to change or create a new scheme (banding) by elevation? For eg. I would like to use only a range of grey no other colors.
View 6 Replies
View Related
Aug 22, 2013
I assume nobody has been able to create a parametric part used for storm pipe networks that can have the pipes attached to a point within the structure other than the insertion, or have the elevation read from a point other than the insertion.
With that in mind, we are trying to develop a tool that would allow us to pick a strucutre, and set its "rim" elevation to a point on a proposed surface that is not at the insertion of the strucure. I am decent with lisp, but have not attempted to gather info from random points on civil ojects.
View 9 Replies
View Related
Aug 28, 2012
I'm looking to change an elevation of a survey point within a drawing. I can see where it is possible to manually unlock the points from the Survey Database to allow the user to edit the point. I'm not seeing a method or property in the API Help for 2013 to do the unlocking with code.
Also is it possible to convert a Survey Point to a regular Cogo Point through the code? Or do I have to delte the point and then recreate it as a COGO point? I think this will be my work around if the above doesn't work.
View 5 Replies
View Related
May 21, 2012
Trying to change the position of the "elevation" labels on the horizontal axis. They come default as being inside the profile and i want them shown on the outside of the profile box.
View 3 Replies
View Related
Mar 15, 2012
How to change the number of decimal places of the elevation of points?
as the points are labeled with their elevations, I couldn’t find how the number of the decimal places of the elevation be chosen. In this case, I wanted to let the number of the decimal places to be zero.
How to set the number of the decimal places to be zero or 1, for example? how to sepcify it height (size)?
Screenshot below.
View 6 Replies
View Related
May 7, 2012
The defaul label style for the Elevation of points is set to 3 decimal places. We are trying to change the elevation display to 2 decimal places. We have tried the directions in the following discussion: [URL].......
Which is:
Toolspace
->Settings
-->Drawing name
--->Edit Drawing Settings
---->Ambient Settings
----->Elevation
------>Precision -> We modify from 3 to 2 decimal places.
It does not modify the display settings.
Also:
Toolspace
->Settings
-->Drawing
--->Point
---->Label Styles
----->(right-click) Edit label styles
------>Layout
------->Text
-------->Contents
--------->click on the "..." (three points) button
(Open "Text Component Editor - Contents"
--------->Select Point Elevation in the driop down list.
---------->Precision: Set to 0.01
------------>Ok, Apply, etc...
This does not seem to work either.
View 3 Replies
View Related
Apr 4, 2012
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
View 1 Replies
View Related
Jul 18, 2012
Its been a while since I have needed to change the elevation of a object. The problem is that does not list the elevaation in the Properties manager on my quick access tool bar or in QP window. I have used it in the past but now its gone. I an using AutoCAD 2011. Ive tried to use the CUI to find it but no luck.
View 5 Replies
View Related
Sep 1, 2011
how to change the elevation of each vertex on a polyline so that each vertex has a different value. The way I attempted this in the past was to click on polyline, click properties and give each vertex the required elevation. However when I looked back at the values I noticed that every vertex had the same value as the last elevation value entered. is it something to do with ensuring polyline is 3D?
View 2 Replies
View Related
Apr 13, 2013
I need to draw a polyline (or spline) in the XY-plane, followed by a vertical segment before continuing in the XY-plane again. The challenge is working out the vertical part while still in the top view. There's no way to change its elevation on the fly that I know of.
View 2 Replies
View Related
Feb 28, 2012
This might be simple, but what is the best way to hatch a part of a surface at say RL4.00 only so that any part of the surface below RL4.00 is hatched and the rest of the surface is not.
View 2 Replies
View Related
May 22, 2013
I used the Volume dashboard to cal volume so when I view the surface in object viewer or 3D I see my TIN volumes surface at zero elevation is this right? I think the reason is because they want us to see both surface so they are not on top of one to another.
View 5 Replies
View Related
Jun 20, 2013
Any way to label the elevation of an object where it is picked? For example, I'd like to be able to pick on the node of a feature line or 3D polyline (or any object really) and have a label placed that displays the elevation of the object at the point where it was picked. This could appear similar to the surface spot elevation label, but instead of getting it's elevation from a surface, it would come from the object where picked.
Alternatively, any way to create a label style, perhaps using the Note label, to display something like this? I don't even care if it is dynamic or not, static would be fine. However, I do need it to scale innovatively . Tool Pac has a feature that does this, but the label is just a polyline and text that is not annotative.
View 4 Replies
View Related
Jan 25, 2013
I turned the visibility of Elevation & Offset label off. How do I get it back. Not all just one spot.
View 1 Replies
View Related
Dec 23, 2013
In the good old days I would create 3d polylines by elevation to create curb lines and driveway cuts. The command was in the terrain pull down. Has this feature been completely down away with?
View 3 Replies
View Related
May 26, 2012
Superelevation curve criteria specifies axis of rotation but the assembly does not contain pivots.
okay i got this Before , just when i wanted to change in the Super Elevation Wizard , to outside lane rotation , i recently used AOR type , but yet no luck. also in my profile the super elevation the Cross slop Band : i always no matter what a rotation about center line.
View 1 Replies
View Related
Jan 21, 2013
I have a surface profile 1 and a corresponding water level profile 1 of a flood plain. Now I get an updated surface profile 2 and the engineer ask me to ajust the water level according to the difference of surface level 1 and 2.
How can I add a irregular distance (water depth) to surface profile 1?
View 9 Replies
View Related
Dec 16, 2013
I conducted 2 surveys on different days and somehow the second survey was off by exactly 0.9 (don't ask because I do not know). With the temperatures being -10C with a very high windchill. I said I would worry about it after the fact once I put it into CAD.
So I am on to Civil3D 2014. I imported the 2 .FBK files and was wondering how to do an elevation drop of 0.900m for just the one survey quickly.
View 8 Replies
View Related
Sep 27, 2013
I'm getting a zero elevation for the surface I create when I compare surfaces to get volumes. What am I missing?
View 9 Replies
View Related
Dec 28, 2012
I have a surface with a bunch of contours. I want to view the contours at elevation 550. In Microstation there is a set display depth command. Is there a tool in autocad where I can view certain elevations.
I want to make layouts/viewports that are clipped to different elevations. For example I have a surface with 5' contours. I want to create multiple viewports on a sheet showing what each contour looks like at its elevation.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 4 Replies
View Related
