AutoCAD 2013 :: Plan View Drawings In Elevation View
Jun 27, 2012
I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies
ADVERTISEMENT
Dec 6, 2007
Residential custom home design. I come from the good old fashioned background of pencil and paper drafting. Although with the recent technology advances I have migrated to the AutoCAD side of the fence, and loving every minute of it. Upon purchasing a copy of AutoCAD 2004, I continued drafting the way I knew how, lines on paper. I have recently upgraded to AutoCAD 2007, and with no formal training, I am looking in drafting in 3D.
My main question has multiple parts;
What is the best way to draw walls in 3D?
What is the best way to add windows and doors? and is there a way to have the "plan view" relate with the "elevation view"?
How do you go about adding a roof?
I have played around in the isometric views attempting to solve the previous questions, although I have been doing all of it with line work. I know there has to be an easier and more efficient way of going about this....
View 9 Replies
View Related
Jul 2, 2012
Is there a way to make 3d view of an object ( say a box) from its plan and elevation? I'm requesting you to all to get a solution.
View 9 Replies
View Related
Aug 23, 2013
I've been using autocad 2012 student version and all the blocks I've used in my dwgs up until now, is blocks I created myself or blocks that I get from someone else. Now, I've been told that autocad comes with a library of blocks in plan and elevation view. How do I access them?
View 9 Replies
View Related
Aug 26, 2011
I placed walls at 12'0" elevation as they wereconflicting with walls below (overlap). I can't see them in plan view - In 3D iso view they are visible.
View 4 Replies
View Related
Mar 26, 2012
i draw up all of my walls, i connect them properly, cleanup etc. then i want to trim them with my roof slabs and what i see? i see my walls suddenly dissappear in 3d view but are still correctly shown on plan view? i know it has something to do with roofline because when i tried to project them automatically to ontu my roof slabs the walls dissappeared too!
View 1 Replies
View Related
Jan 18, 2013
I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies
View Related
May 29, 2013
Is there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.
View 9 Replies
View Related
Apr 23, 2013
I have received a drawing from a consultant that appears to be locked to a plan view. How this has been done and I would like to switch it off.
Just to be clear it is locked in the modelspace tab not a viewport.
View 3 Replies
View Related
Jan 10, 2012
We have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets. Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list. If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically. I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order.
View 4 Replies
View Related
Sep 23, 2013
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies
View Related
Jun 18, 2013
I am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
View 7 Replies
View Related
May 16, 2012
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies
View Related
Jul 9, 2013
Is it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
View 1 Replies
View Related
May 30, 2012
I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies
View Related
Jan 9, 2014
Is there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies
View Related
Apr 4, 2012
When making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies
View Related
Jun 14, 2012
I went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
View 1 Replies
View Related
May 28, 2013
We using CODEBOOK to generate the layout plan, elevation. When we insert form CODEBOOK this alert appear.
Last time, we work with ACAD 2011 normally. Got the problem when upgrade to 2013.
See the attached.
View 9 Replies
View Related
Feb 15, 2013
Having issues plotting. I have a sheet with 3d piping in plan view, viewport is set to Legacy Hidden as always. I have a 3DCLIP plane set to only see pipe at a certain elevation. When plotted, some of the pipe lines are missing. If I change the viewport display view, then the piping is fine but random objects show up that shouldn't b/c of my 3DCLIP plane.
View 0 Replies
View Related
Dec 28, 2012
I have a surface with a bunch of contours. I want to view the contours at elevation 550. In Microstation there is a set display depth command. Is there a tool in autocad where I can view certain elevations.
I want to make layouts/viewports that are clipped to different elevations. For example I have a surface with 5' contours. I want to create multiple viewports on a sheet showing what each contour looks like at its elevation.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 4 Replies
View Related
Feb 23, 2012
I've got an elevation analysis with a nice range of colours in plan which look fine but I want to display this in a 3D view for a presentation.
I selected the object and went to object viewer but I can't get the analysis in colour. I'm guessing I'm missing something obvious but can't figure out what...
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 2 Replies
View Related
Mar 12, 2012
Are there places where I can find plan view furniture pieces for AutoCAD 2012? I have found some, but most are commercial. I'm looking for residential furniture like sofas, loveseats, and chairs in victorian era styles.
View 1 Replies
View Related
Aug 2, 2012
Autocad Architecture 2012: my dwg is fully visible in 3D View but partially visible in plan View. What could be causing this problem? See screen shot attached.
View 4 Replies
View Related
Aug 28, 2012
I am simply xref'ing a profile drawing into a sheet drawing to print out. AS shown on the attached, when the profile comes into the xref I lose all the band data and the EG line does not come in as a dashed 2 line as the layer is set to. It almost looks as if the PL linetype generation is off for this line.
View 1 Replies
View Related
Jul 12, 2007
I found super elevation labeling for profile, but not for alignment in plan view. Is there a way to label alignment, f.x. in critical points of super elevation automatically?
View 2 Replies
View Related
Dec 28, 2012
I am using AutoCAD Architecture 2011. I've inserted 3 windows in an exterior wall. They all can be seen in Plan (top) view. I've gone back and changed the height of the windows. Now when I look in Plan (top) view, the windows I've changed the dimensions on are no longer visible.how to make these windows visible again in plan (top) view?
Note: These re-sized windows can be seen in any other perspective except Plan (top) view.
View 0 Replies
View Related
Nov 23, 2013
I need drawing a set of winder stairs in plan view. I am using autocad 2008.
View 9 Replies
View Related
Oct 31, 2012
I am using LISP in C3D 2012. I am trying to get the station and elevation of a point I pick in a profile view. I found the Method that will get that info, but I can';t seem to get the syntax right.This is the Method;
HRESULT FindStationAndElevationAtXY(
[in] double X,
[in] double Y,
[out] double * pStation,
[out] double * pElevation,
[out, optional] VARIANT * pInBounds
[code]...
View 4 Replies
View Related
Feb 3, 2011
Can I use AEC Dimension in a Section/Elevation View in ACA? So, when an Wall height changes, the AEC will change too after refresh the section/elevation.
View 1 Replies
View Related
May 19, 2013
Need getting pipe top elevation in profile view data band? In labels it's possible to perform calculations via expressions. In data bands – not. Inablity to get pipe outside top elevation in profile view leads to dead end in my hunt for smooth workflow.
View 5 Replies
View Related
