Is there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies
I have Product Design Suite Premium 2013. In this, the AutoCAD program (with Mechanical loaded or not) at times has an error with a file where the View Cube will move with the zooming (gets larger and smaller) and panning (moves around screent), until I regen (goes back to original position). In addition when it moves, it no longer functions (even if I attempt to click on the screen where it should stay). This is getting quite annoying, because I can't seem to discover the cause. Some CAD files were corrupt, others were not. I just updated the video card driver (ATI Radeon HD 5970 1gb DDR 5), it has no effect.
View 8 Replies View Relatedwhy when the view cube and the view control do not harmonize. When I set the view to front to start a 3D model, the view cube is set to Top. When I change the viewcube to Front, the view has automatically been set to Bottom. Is this a bug or something I am missing?
Also drawing a front view. Is is ok to just turn the view to Front and start drawing on the same XY plane? Or I also need to rotate the UCS to ZX?
Does such initial position important with respect to future rendering?
URL....I have recently started designing a few replacement parts for a motorcycle restoration I am working on and while up to now.I have been working in the 2D space I need to convert a 2D drawing to 3D!
I think I have a list of commands and tools to be used but for the life of me I cannot turn on the VIEW CUBE...I spent about 90 minutes trying last night.I did look in options and it was not visible there?
I am running 2009 SP1 on a 32-bit machine. When I move the mouse in Inventor, the View Cube blinks. This started before installing SP1, but not as often. Now it blinks constantly as I move the mouse. I have re-installed the mouse driver, but that did not work.
View 3 Replies View RelatedHow can i quickly make my view cube operational again? I'm in parallel projection.
View 7 Replies View RelatedIs there a way to change my view cube labels?
View 3 Replies View RelatedThe problem is: the view cube doesn't respond and the navigation pane/tool/group doesn't respond either. If i click on any of the tools it doesn't register in the command line.
The view cube stops working after some amount of time (or clicks) regardless of what I've been doing. If I switch to another drawing the view cube works fine there. If I close the (not working) drawing and open again it works fine.
The views under view work.
How to make view cube visible on autocad 2010
View 3 Replies View RelatedIn AutoCAD 2011. After a little bit the view cube stops working. Ill click for ,example, left side, and nothing happens untill i close out and reopen.
I sucks big time when your modeling and you use it constantly while drawing on different axises.
the command to get my view cube to show back up. I tried "cube" and it was defaulted to <on> but it doesnt show up.
View 9 Replies View RelatedI created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedI am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View Relatedis there a way to get rid of the ucs icon/view cube thing in the top right corner?
I open up an old drawing with multiple viewports and half of them have this symbol. So I assume that there is a way to turn it off. Again, trying to make computer faster and not have a graphic symbol in all of my viewports.
In the previous versions of civil 3d 2012 or earlier, I never had a problem with the view cube not staying pointed to the north. Since I never touched it in the past, how do I get it to stay pointed to the north?
View 7 Replies View RelatedI print the file and it looks like the View Cube and Navigation Bar print on the page. I print it a second time and I don't see it.
View 5 Replies View RelatedUnder the view cube, in part files, there must be a short ribbon with 3 or 4 view orientation buttons: the navigation bar.It disappeared, how to bring it back?
View 1 Replies View RelatedIs it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies View RelatedWhen making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies View RelatedI have a problem assigning shortcuts to the view cube... the "Home" command works ok with short cuts but others like "Left" or "Right" don't..
View 3 Replies View RelatedI'm having a bit of an issue with using this software properly on an older computer.
The only rendering software the computer is capable of running is OpenGL, not DirectX, which appears to be the default.
Apparently, the View Cube will not operate when OpenGL is being used, which prevents me from navigating the scene properly...
Would there happen to be a way to have the View Cube display without the use of DirectX? Or do any alternatives to the View Cube exist?
I just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
I have Pro X4 ultimate. Sommes filters transition 3 D like cube floating don't work. I have reinstall many time but the result is the same. The others filters are OK.
Before I had Pro X3 et Pro X4 and it was OK.
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
