AutoCAD 2013 :: Moving View Cube
May 21, 2012
I have Product Design Suite Premium 2013. In this, the AutoCAD program (with Mechanical loaded or not) at times has an error with a file where the View Cube will move with the zooming (gets larger and smaller) and panning (moves around screent), until I regen (goes back to original position). In addition when it moves, it no longer functions (even if I attempt to click on the screen where it should stay). This is getting quite annoying, because I can't seem to discover the cause. Some CAD files were corrupt, others were not. I just updated the video card driver (ATI Radeon HD 5970 1gb DDR 5), it has no effect.
View 8 Replies
ADVERTISEMENT
Jan 9, 2014
Is there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies
View Related
Jul 21, 2012
why when the view cube and the view control do not harmonize. When I set the view to front to start a 3D model, the view cube is set to Top. When I change the viewcube to Front, the view has automatically been set to Bottom. Is this a bug or something I am missing?
Also drawing a front view. Is is ok to just turn the view to Front and start drawing on the same XY plane? Or I also need to rotate the UCS to ZX?
Does such initial position important with respect to future rendering?
View 2 Replies
View Related
Oct 30, 2013
URL....I have recently started designing a few replacement parts for a motorcycle restoration I am working on and while up to now.I have been working in the 2D space I need to convert a 2D drawing to 3D!
I think I have a list of commands and tools to be used but for the life of me I cannot turn on the VIEW CUBE...I spent about 90 minutes trying last night.I did look in options and it was not visible there?
View 9 Replies
View Related
Sep 16, 2008
I am running 2009 SP1 on a 32-bit machine. When I move the mouse in Inventor, the View Cube blinks. This started before installing SP1, but not as often. Now it blinks constantly as I move the mouse. I have re-installed the mouse driver, but that did not work.
View 3 Replies
View Related
Jan 31, 2012
How can i quickly make my view cube operational again? I'm in parallel projection.
View 7 Replies
View Related
Jun 18, 2012
Is there a way to change my view cube labels?
View 3 Replies
View Related
May 17, 2011
The problem is: the view cube doesn't respond and the navigation pane/tool/group doesn't respond either. If i click on any of the tools it doesn't register in the command line.
The view cube stops working after some amount of time (or clicks) regardless of what I've been doing. If I switch to another drawing the view cube works fine there. If I close the (not working) drawing and open again it works fine.
The views under view work.
View 2 Replies
View Related
May 22, 2011
How to make view cube visible on autocad 2010
View 3 Replies
View Related
Nov 26, 2011
In AutoCAD 2011. After a little bit the view cube stops working. Ill click for ,example, left side, and nothing happens untill i close out and reopen.
I sucks big time when your modeling and you use it constantly while drawing on different axises.
View 1 Replies
View Related
Feb 23, 2012
the command to get my view cube to show back up. I tried "cube" and it was defaulted to <on> but it doesnt show up.
View 9 Replies
View Related
Mar 23, 2011
is there a way to get rid of the ucs icon/view cube thing in the top right corner?
I open up an old drawing with multiple viewports and half of them have this symbol. So I assume that there is a way to turn it off. Again, trying to make computer faster and not have a graphic symbol in all of my viewports.
View 1 Replies
View Related
Nov 5, 2012
In the previous versions of civil 3d 2012 or earlier, I never had a problem with the view cube not staying pointed to the north. Since I never touched it in the past, how do I get it to stay pointed to the north?
View 7 Replies
View Related
Sep 27, 2013
I print the file and it looks like the View Cube and Navigation Bar print on the page. I print it a second time and I don't see it.
View 5 Replies
View Related
Jul 13, 2013
Under the view cube, in part files, there must be a short ribbon with 3 or 4 view orientation buttons: the navigation bar.It disappeared, how to bring it back?
View 1 Replies
View Related
Mar 6, 2012
I need to create a cube with the bottom of the cube being flat and then the top being at a slope with all 4 top corners being at different heights, basically I am looking to see if there is a command that let's me drag the corners to where I want it but for the life of me I can't find it
View 9 Replies
View Related
Sep 14, 2013
I just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
View 6 Replies
View Related
Aug 21, 2012
I have a problem assigning shortcuts to the view cube... the "Home" command works ok with short cuts but others like "Left" or "Right" don't..
View 3 Replies
View Related
Apr 19, 2013
I'm having a bit of an issue with using this software properly on an older computer.
The only rendering software the computer is capable of running is OpenGL, not DirectX, which appears to be the default.
Apparently, the View Cube will not operate when OpenGL is being used, which prevents me from navigating the scene properly...
Would there happen to be a way to have the View Cube display without the use of DirectX? Or do any alternatives to the View Cube exist?
View 1 Replies
View Related
Jan 22, 2013
I have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies
View Related
Jul 20, 2012
I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself. ?
Civil 3D 2012
View 2 Replies
View Related
Sep 23, 2013
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies
View Related
Jun 18, 2013
I am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
View 7 Replies
View Related
May 16, 2012
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies
View Related
Jul 9, 2013
Is it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
View 1 Replies
View Related
Jun 27, 2012
I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies
View Related
Apr 4, 2012
When making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies
View Related
Aug 20, 2012
I am having a problem with moving my profile grades. I go to Utilities under Corridors and create a profile for the left and right curb. They show up in my Alignment Profile, but when I click on one to move it, it disappears. When I type regen, it shows back up. I am trying to set my crossection grades in my Multiple Section Views. I first create my Profile from Surface, then do a proposed centerline grade by Draw tangents with curves. I create the corridor, put in the regions, go to corridor properties and pick the right and left corridor lines I have created. Then I set the existing surface and attach it to my profile. I create the sample lines and the Multi Section Views. Where am I screwing up?
View 4 Replies
View Related
Jan 1, 2014
I am having trouble moving an object a certain distance. The distance is defined by a pre-defined variable. I just can't figure out the syntax for the autolisp command.
Here is the bit of code if written, there is more code not shared here that defines the points for the polyline .
;-- the varaible box_height is defined earlier in the routine
;-- Draw the polyline for the top of the cabinet
(command "pline" p1tt P2tt P3tt P4tt P5tt P6tt P7tt P8tt "c")
;-- Assign the new part a variable name
(setq cab_toppl (entlast))
;-- Extrude the polyline to make the top of the cabinet
(command "extrude" cab_toppl "" cab_intw "0")
;-- Assign the new part a variable name
(setq cab_top (entlast))
;-- Rotate the top of the cabinet down to the floor of cabinet
(command "rotate3d" cab_top "" 2 p1tt p2tt 90)
;-- Move the top of the cabinet to the final location
;-- HERE IS THE PART I'M HAVING TROUBLE WITH. ESSENTIALLY ONCE THE PART IS CREATED I'VE NAMED IT CAB_TOP AND AM NOW TRYING TO MOVE IT IN THE Z AXIS THE DISTANCE DEFINED BY THE VARIABLE BOX_HEIGHT WITHOUT USER INPUT
(command "move" cab_top "" "0,0,0" (list (0 0 (box_height) "")
;--THIS PART IS OKAY
(setvar "CLAYER" oldlayer) ;restore active layer
(setvar "BLIPMODE" 1)
(setvar "OSMODE" 135)
View 1 Replies
View Related
Apr 23, 2013
I have a dual screen set up. I left work last night with no problems. I fired up my PC this morning and all of a sudden all of my dialog boxes appear on my second screen. I have disconnected the second screen and all the boxes return to normal. Plug the second screen back in and the dialog boxes go back to the second screen.
View 5 Replies
View Related
Apr 23, 2013
I am well aware this has been an issue for awhile and supposedly fixed in 2008 SP1.
But we are running Civil 3d 2013. and still getting this issue.
The Multiline Attributes in our title blocks keep moving themselves randomly upon reentering the drawing.
Any clear cut solution for rectifying this problem?
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
View 9 Replies
View Related
