I am running 2009 SP1 on a 32-bit machine. When I move the mouse in Inventor, the View Cube blinks. This started before installing SP1, but not as often. Now it blinks constantly as I move the mouse. I have re-installed the mouse driver, but that did not work.
View 3 RepliesIs there a way to change my view cube labels?
View 3 Replies View RelatedUnder the view cube, in part files, there must be a short ribbon with 3 or 4 view orientation buttons: the navigation bar.It disappeared, how to bring it back?
View 1 Replies View RelatedI just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
Is there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies View Relatedwhy when the view cube and the view control do not harmonize. When I set the view to front to start a 3D model, the view cube is set to Top. When I change the viewcube to Front, the view has automatically been set to Bottom. Is this a bug or something I am missing?
Also drawing a front view. Is is ok to just turn the view to Front and start drawing on the same XY plane? Or I also need to rotate the UCS to ZX?
Does such initial position important with respect to future rendering?
URL....I have recently started designing a few replacement parts for a motorcycle restoration I am working on and while up to now.I have been working in the 2D space I need to convert a 2D drawing to 3D!
I think I have a list of commands and tools to be used but for the life of me I cannot turn on the VIEW CUBE...I spent about 90 minutes trying last night.I did look in options and it was not visible there?
I have Product Design Suite Premium 2013. In this, the AutoCAD program (with Mechanical loaded or not) at times has an error with a file where the View Cube will move with the zooming (gets larger and smaller) and panning (moves around screent), until I regen (goes back to original position). In addition when it moves, it no longer functions (even if I attempt to click on the screen where it should stay). This is getting quite annoying, because I can't seem to discover the cause. Some CAD files were corrupt, others were not. I just updated the video card driver (ATI Radeon HD 5970 1gb DDR 5), it has no effect.
View 8 Replies View RelatedHow can i quickly make my view cube operational again? I'm in parallel projection.
View 7 Replies View RelatedThe problem is: the view cube doesn't respond and the navigation pane/tool/group doesn't respond either. If i click on any of the tools it doesn't register in the command line.
The view cube stops working after some amount of time (or clicks) regardless of what I've been doing. If I switch to another drawing the view cube works fine there. If I close the (not working) drawing and open again it works fine.
The views under view work.
How to make view cube visible on autocad 2010
View 3 Replies View RelatedIn AutoCAD 2011. After a little bit the view cube stops working. Ill click for ,example, left side, and nothing happens untill i close out and reopen.
I sucks big time when your modeling and you use it constantly while drawing on different axises.
the command to get my view cube to show back up. I tried "cube" and it was defaulted to <on> but it doesnt show up.
View 9 Replies View Relatedis there a way to get rid of the ucs icon/view cube thing in the top right corner?
I open up an old drawing with multiple viewports and half of them have this symbol. So I assume that there is a way to turn it off. Again, trying to make computer faster and not have a graphic symbol in all of my viewports.
In the previous versions of civil 3d 2012 or earlier, I never had a problem with the view cube not staying pointed to the north. Since I never touched it in the past, how do I get it to stay pointed to the north?
View 7 Replies View RelatedI print the file and it looks like the View Cube and Navigation Bar print on the page. I print it a second time and I don't see it.
View 5 Replies View RelatedI need to create a cube with the bottom of the cube being flat and then the top being at a slope with all 4 top corners being at different heights, basically I am looking to see if there is a command that let's me drag the corners to where I want it but for the life of me I can't find it
View 9 Replies View RelatedI have a problem assigning shortcuts to the view cube... the "Home" command works ok with short cuts but others like "Left" or "Right" don't..
View 3 Replies View RelatedI'm having a bit of an issue with using this software properly on an older computer.
The only rendering software the computer is capable of running is OpenGL, not DirectX, which appears to be the default.
Apparently, the View Cube will not operate when OpenGL is being used, which prevents me from navigating the scene properly...
Would there happen to be a way to have the View Cube display without the use of DirectX? Or do any alternatives to the View Cube exist?
2d to 3d no cube appears when I click on base view diologe box appears left hand corner that it
View 2 Replies View Relatedafter several minutes working on a dwg file the file goes into a blinking mode. The only way that i can get out of the drawing is control at delete.
View 1 Replies View RelatedOne of my co-worker has this problem with his cursor's crosshairs. When he moves his cursor the crosshairs are like blinking or sort of flashing. It's not that big of a problem but it's just getting anoying in a short while.
View 9 Replies View RelatedIs there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedI've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedAfter upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View Relatedhow to show section view in base view with out projection the component.
View 2 Replies View Related