AutoCad 3D :: View Cube And The View Control Do Not Harmonize?
Jul 21, 2012
why when the view cube and the view control do not harmonize. When I set the view to front to start a 3D model, the view cube is set to Top. When I change the viewcube to Front, the view has automatically been set to Bottom. Is this a bug or something I am missing?
Also drawing a front view. Is is ok to just turn the view to Front and start drawing on the same XY plane? Or I also need to rotate the UCS to ZX?
Does such initial position important with respect to future rendering?
View 2 Replies
ADVERTISEMENT
Jan 9, 2014
Is there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies
View Related
Oct 30, 2013
URL....I have recently started designing a few replacement parts for a motorcycle restoration I am working on and while up to now.I have been working in the 2D space I need to convert a 2D drawing to 3D!
I think I have a list of commands and tools to be used but for the life of me I cannot turn on the VIEW CUBE...I spent about 90 minutes trying last night.I did look in options and it was not visible there?
View 9 Replies
View Related
May 21, 2012
I have Product Design Suite Premium 2013. In this, the AutoCAD program (with Mechanical loaded or not) at times has an error with a file where the View Cube will move with the zooming (gets larger and smaller) and panning (moves around screent), until I regen (goes back to original position). In addition when it moves, it no longer functions (even if I attempt to click on the screen where it should stay). This is getting quite annoying, because I can't seem to discover the cause. Some CAD files were corrupt, others were not. I just updated the video card driver (ATI Radeon HD 5970 1gb DDR 5), it has no effect.
View 8 Replies
View Related
Sep 16, 2008
I am running 2009 SP1 on a 32-bit machine. When I move the mouse in Inventor, the View Cube blinks. This started before installing SP1, but not as often. Now it blinks constantly as I move the mouse. I have re-installed the mouse driver, but that did not work.
View 3 Replies
View Related
Jan 31, 2012
How can i quickly make my view cube operational again? I'm in parallel projection.
View 7 Replies
View Related
Jun 18, 2012
Is there a way to change my view cube labels?
View 3 Replies
View Related
May 17, 2011
The problem is: the view cube doesn't respond and the navigation pane/tool/group doesn't respond either. If i click on any of the tools it doesn't register in the command line.
The view cube stops working after some amount of time (or clicks) regardless of what I've been doing. If I switch to another drawing the view cube works fine there. If I close the (not working) drawing and open again it works fine.
The views under view work.
View 2 Replies
View Related
May 22, 2011
How to make view cube visible on autocad 2010
View 3 Replies
View Related
Nov 26, 2011
In AutoCAD 2011. After a little bit the view cube stops working. Ill click for ,example, left side, and nothing happens untill i close out and reopen.
I sucks big time when your modeling and you use it constantly while drawing on different axises.
View 1 Replies
View Related
Feb 23, 2012
the command to get my view cube to show back up. I tried "cube" and it was defaulted to <on> but it doesnt show up.
View 9 Replies
View Related
Mar 23, 2011
is there a way to get rid of the ucs icon/view cube thing in the top right corner?
I open up an old drawing with multiple viewports and half of them have this symbol. So I assume that there is a way to turn it off. Again, trying to make computer faster and not have a graphic symbol in all of my viewports.
View 1 Replies
View Related
Nov 5, 2012
In the previous versions of civil 3d 2012 or earlier, I never had a problem with the view cube not staying pointed to the north. Since I never touched it in the past, how do I get it to stay pointed to the north?
View 7 Replies
View Related
Sep 27, 2013
I print the file and it looks like the View Cube and Navigation Bar print on the page. I print it a second time and I don't see it.
View 5 Replies
View Related
Jul 13, 2013
Under the view cube, in part files, there must be a short ribbon with 3 or 4 view orientation buttons: the navigation bar.It disappeared, how to bring it back?
View 1 Replies
View Related
Aug 21, 2012
I have a problem assigning shortcuts to the view cube... the "Home" command works ok with short cuts but others like "Left" or "Right" don't..
View 3 Replies
View Related
Apr 19, 2013
I'm having a bit of an issue with using this software properly on an older computer.
The only rendering software the computer is capable of running is OpenGL, not DirectX, which appears to be the default.
Apparently, the View Cube will not operate when OpenGL is being used, which prevents me from navigating the scene properly...
Would there happen to be a way to have the View Cube display without the use of DirectX? Or do any alternatives to the View Cube exist?
View 1 Replies
View Related
Sep 14, 2013
I just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
View 6 Replies
View Related
Jul 24, 2013
Possible to view the control points of a 2d or 3d object. I know that we can view the control points for spline objects, but is it possible to view the control points also for every other object i draw?
View 2 Replies
View Related
Aug 4, 2011
I have been using AutoCad for 2009 and had it all set perfect. Just had a computer melt down and trying to establish everything back how I had it all before.
One little tool that was very useful was a drop down box called, VIEWPORT SCALE CONTROL. I had all my scales in there and used to just click the border in paperspace, click the scale from the drop down box and set your scale. How to get this back.
View 9 Replies
View Related
Jul 10, 2012
When placing or creating a new part in an assembly it is visible in every view rep which is a huge pain the proverbial.
Is there a setting to tell Inventor to only make newly inserted/created parts visible in the active view rep.
I am so tired of having to go through all my view reps every time I add a new part to an assembly.
View 4 Replies
View Related
Sep 16, 2011
I'm creating a small product configurator using ilogic. It all works fine, but i've i challenge:controlling the visibility of the components in a drawing view
In simple words, every occurrence of my assembly has an custom Ipropertie calles "Positie". there where 4 values (Bodem, Zij, Kop, Deksel and Overig)In a drawing view i only want to see the parts that has a specific value of the ipropertie "Positie".I found a sample code for VBA, but I cann't get it worked in ilogic.:
Sub HideSecond()
'Assumes you have an open drawing
'Assumes that view 1 of the active sheet is an assembly
'Turns off visibility of assembly's second component in open drawing's first view
[code]....
hind to turn this into ilogic and add the option to check the ipropertie to turn on the visibility
View 6 Replies
View Related
Oct 18, 2012
Inventor 2013 sp1
i want to control the scales of my idw views based on the parts size.
Heres a short intro to what we do, using design assistant we copy an existing project to a new project folder and start designing using the old project as a "template" for the new job.
So, lets say the project i just copied has a part that is 100" "tall", on my drawing sheet the view scale is set to .05 and the view fits nicely on our 8 1/2x11 portrait layout.
Now, the new project's part is only 24" "tall" and using a scale of .05 is no good at all, i need to scale the view up so it will fit nicely in the same layout. This also applies to the associated detail and section views that are on the same sheet.
OK then, Im thinking there should be a way to say if dimx is >=100 then view scale is x and so on if the part is smaller and i would like to do this with the details/sections.
As the pics show, when i change to a smaller size/dia, the views scale needs to be increased. How can this be done... (we do not use vault)
View 1 Replies
View Related
Feb 24, 2011
is there any way using iLogic or other method to automatically control the size of the 'break' in a drawing view? I have built a model which uses iLogic to control virtually everything, however the large variations in the length of the product mean that there are some interesting results when it comes to the broken drawing views updating.
it would be nice to locate the break at the absolute center of the view and then size it as a percentage of the view size along one axis or perhaps according to some other length based rule.
Dell Precision M6400 - C2D 2.66 / 8gb / Quadro FX3700M / Win 7 Pro x64
View 9 Replies
View Related
Oct 15, 2013
I'm a relatively new user to Revit (almost a year). My issue is that all of a sudden my view control bar is located so far to the left in the view window, the project browser almost covers it. I know that I can move the project browser window so that isn't all that critical. My concern is that when I want to look at a schedule it also is so far to the left of the screen I have to move the other windows to see it.
View 1 Replies
View Related
Dec 8, 2011
I've made a failed attempt to add the RIBBONCONTROL Named Views to the main Quick Access Toolbar. The Customize User Interface dialogue box (CUI) seems to allow me to drag the Named Views RIBBONCONTROL from the command list to Quick Access Toolbar 1. I don't see the "forbidden" icon and the blue insert bar shows up when I perform the drag operation.
However, I suspect there is some compatibility issue, because the command doesn't pop up when I release the mouse button at the end of the drag operation. Using command QUICKCUI and trying to drag Named Views RIBBONCONTROL directly to the Quick Access Toolbar (on screen) seems to be allowed likewise, but doesn't work also.
Using the regular View Manager Dialogue is not the kind of solution I'm looking for, because in the View Manager it takes at least twice as much mouse clicks to change to another view.
Any way to reach the desired customization? Should it be reported as a bug to Autodesk?
View 5 Replies
View Related
Mar 22, 2011
I cannot find that feathering control bar.
When I go to windows, control bars, and check it, nothing comes into view. So I assume it's out of my view...how do I get it back?!
View 3 Replies
View Related
Dec 5, 2012
I have a model with 15 floors and shaft objects in them. No matter what the Phase setting is for the shaft object the floor holes created by the shaft always show and cannot be eliminated with any Phase filter view control. We need to adjust shaft locations and would like to maintain the cutting by shaft object through all floors.
View 1 Replies
View Related
Oct 3, 2010
I have a model whit lots of non orthogonal walls. How can I control the alignment of an elevation view? Align does not work, and the elevation tag has almost not options. I tried with an scope box, but I get a message "elevation must be parallel to the scope box" That is just what I want!!!!!!!!!
View 2 Replies
View Related
Jun 13, 2011
I'm not able to find any control for changing line width in stylized view type like tech, ink etc. Is there a control available for it or is it just as it is solution?
Feature is nice though and it would be nice to have such minor controls for it.
View 9 Replies
View Related
Dec 20, 2012
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
View 9 Replies
View Related
