I'm not able to find any control for changing line width in stylized view type like tech, ink etc. Is there a control available for it or is it just as it is solution?
Feature is nice though and it would be nice to have such minor controls for it.
Using [PS6], how can I make the line left by the pen tool heavier?
I've been pounding away with google and PS6 manual... but must be using off the wall search stings or something because I'm getting piles of info about bezier curves and using the pen tool but no mentions of making the damn line at least visible.
Even on High desktop sizes that darn line, if anywhere near any other border or line, is nearly invisible.
I'd like a line several pixels wide... but not seeing how that is done.
I have it enabled in the tablet properties. Windows 7 64bit.
View 1 Replies View RelatedI'm doing Gary's Create a Sunflower and pot (July 2008) tutorial and just as always I run into problems combining/converting shapes. I believe I have followed the tut exactly and the only thing my lines do is taper at the bottom.
Also, I'm using Designer 7 and there is no option for changing line width to 6 px, only 4 and 8. So I'm using 8 pxls. I tried typing in a 6 and hitting enter but it doesn't accept a 6.
I typed "text" in the help box, did a bunch of reading, but didn't see the answer to this. I have two colored text.....a thin line in one color and an inner color. How do I increase the thickness of the outer line?
View 2 Replies View Related[URL] ......
Floating command line width gets shorter and shorter everytime you open up AutoCAD? Civil 3D is real bad, I used it to shoot the above video. In regular AutoCAD, it still shrinks, but it shrinks a lot less.
Any tips for keeping it floating but making the width stay constant?
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
I can't find my Command Line Window. It somehow became undocked and is no where to be found on my screen. It does not appear to be floating anywhere. I've gone through all my display settings; however it says that it should be there and show 3 lines of commands.
View 9 Replies View RelatedI cant seem to find filter select or a list view for the record area. Both of these functions come in handy on feature films and episodic television especially vfx heavy shows.
View 2 Replies View RelatedTrying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
Using AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
I have several students working in 2012 or 2013 PC & Mac education edition who set the line type properties correctly but the line does not "read" correctly. Checked global scale factor, listed the content to confirm layer and line type as hidden, etc., checked the properties, made sure the line type and color were set to "by layer". It doesn't matter between model or paper space - the lines will not read.
View 6 Replies View RelatedI want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
Where is the option to control page width & height so that you can make both even measurements? I typically get something like w 1920.4px & h 1080px. When I try to change the width to 1920 the height adjusts as well. I know there is a simple fix for this but I can't find it.
View 3 Replies View Relatedsuddenly I hit something tonight that makes the entire layer control enlarge to the width of the screen everytime I click on the icon.
How do I get it to stay small when I click on Layer Control?
enlarged Layer Control.PDF
I am looking to draw my pipe with a thicker appearance than the typical line of width "0". Our storm pipes are usually drawn with this so as to stand out from other utilities. If the pipe is represented by a polyline, I have usually adjusted the "Width" or "Global Width" value to my liking. With pipe objects, it seems more complicated. I have searched the settings, and the closest thing that I could find was the Lineweight property, but that appears to have no effect on the line thickness in the CAD drawing.
Do I need to tweak a plot setting? Make a new linetype altogether?
why when the view cube and the view control do not harmonize. When I set the view to front to start a 3D model, the view cube is set to Top. When I change the viewcube to Front, the view has automatically been set to Bottom. Is this a bug or something I am missing?
Also drawing a front view. Is is ok to just turn the view to Front and start drawing on the same XY plane? Or I also need to rotate the UCS to ZX?
Does such initial position important with respect to future rendering?
i have a set of coordinates, not on the polyline. i want to find the polyline width where that coodinate intersects perpendicular to the polyline (shortest distance). without going through all the vertices.
i have a polyline with many segments with varying width, which are constant through the each segments (no taper width). need to read off the "instantaneous" width.
just 2dpoly or lwpoly not 3d.
i found this
[URL]........
Not quite what i want.
I have a problem with my table in Corel Draw X6.
So, my table has a few rows and a few columns. I want the width of the first cell of the last row to be wider by 1 cm than the width of the first cells of the other rows.
When i select a cell and resize it with my cursor, the whole column changes width. I want the column to stay as it is, just its last cell to change width. How to do this?
I need to change the width and height of some text i'm inputting to and image so that the height is 100% and the width is 75% in ariel size 11, how do i do it? I cannot find the answer on google,
also, the phrase capitalized, is this some special setting or does it just mean write in capitals
What's the commnd to change the default line thickness in AutoCAD 2012?
I know to PE - W - x Value, but is there a command that changes what a pl's width starts at?
I've just bought VideoStudio Pro X4 and I want to mute the sound on my clips as I'm going to have music playing instead. On page 115 of the manual it says I will find the clip volume control in the Music and Voice tab. I have been all over the program interface and clicked on virtually everything but I cannot find a Music and Voice tab. In the end I had to split the audio for each clip and delete it. how to find the Clip audio volume control?
View 2 Replies View Relatedcan't find any control to draw image at ADM dialog.
All I need is just render a picture from png or jpeg file or from memory on a top half of ADM dialog and CS4 SDK.
I suppose I have to use IADMDrawer, ADMImageSuite...
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedI have polylines and changed the width to 3/4" and now the Plines are not solid (filled like a hatch) anymore? They are splined as well. I must have changed a setting somewhere and did not know it. AutoCAD 2012.
View 4 Replies View RelatedI am using Photoshop CS3 Extended
I am familiar with batch jobs in Photoshop.
I have images that vary in pixel size and resolution.
This project is for an online gift registry. First, we are hosting the images, but they have restraints due their web/system programming. So what I was told by the company was they need the images to be 300 x 300 pixel images at 72dpi. They said they would settle for 300 width only and let me scale the proportions and not worry about the height as I want to batch the process. But they stressed 300 width and 72dpi.
What I have tried is batch resizing all of them to 300 pixel width, worked fine. Then I batched changing the resolution to 72. But it changed all the pixel dimensions to various sizes. So then I tried to batch 300 pixel width and 72 resolution at one time at it ends up the same way. So what do I need to do to get 300 x 300 pixel and 72dpi?
1)I have read plenty of PPI vs DPI. Is "resolution" in Photoshop, PPI?
2)Was what they probably meant by 72dpi actually 72ppi?
3)How do I accomplish this?
How do I globally change the defined width of a group of mtext entities in a drawing? If I select a few mtext entities that I want to make the same width then go to Properties, the Defined Width box says "varies" and is not editable. Seems like long ago I used to be able to do this, but not now. I'm running 2011 autocad.
View 6 Replies View RelatedIs there a way - or 3rd party app or lisp- to change the width of multiple Mtext objects all at once? I have several drawings where the width of all Mtext objects is 1.25, and I would like to change all of them to 1.
View 8 Replies View RelatedI have annotative mtext that keeps changing width and location. See pic. When gripped, they're in the correct location but wrong scale. I experienced this on a few drawings with C3d 2010 and now 2011.
View 7 Replies View RelatedWhen I create new mtext in my drawings I normally like to have a zero width.
Instead I'm creating new mtext and it has a set width that I am unable to change in the properties window.
I have no problems with changing the justification point.
Is this a setting that I can change?
Plus is it posible to change the default so that I don't have to worry about changing it every time?
How do you convert a 3d hidden line view in Revit into 2d hiddenline flatten view? Or I have to bring it to AutoCAD to flatten it?
View 1 Replies View Related