AutoCad 3D :: Making 3D View Of Object From Its Plan And Elevation
Jul 2, 2012Is there a way to make 3d view of an object ( say a box) from its plan and elevation? I'm requesting you to all to get a solution.
View 9 Replies
ADVERTISEMENT
AutoCAD 2013 :: Plan View Drawings In Elevation View
Jun 27, 2012I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies View RelatedAutoCad 3D :: Plan View Relate With Elevation View?
Dec 6, 2007Residential custom home design. I come from the good old fashioned background of pencil and paper drafting. Although with the recent technology advances I have migrated to the AutoCAD side of the fence, and loving every minute of it. Upon purchasing a copy of AutoCAD 2004, I continued drafting the way I knew how, lines on paper. I have recently upgraded to AutoCAD 2007, and with no formal training, I am looking in drafting in 3D.
My main question has multiple parts;
What is the best way to draw walls in 3D?
What is the best way to add windows and doors? and is there a way to have the "plan view" relate with the "elevation view"?
How do you go about adding a roof?
I have played around in the isometric views attempting to solve the previous questions, although I have been doing all of it with line work. I know there has to be an easier and more efficient way of going about this....
AutoCad :: How To Access Library Of Blocks In Plan And Elevation View
Aug 23, 2013I've been using autocad 2012 student version and all the blocks I've used in my dwgs up until now, is blocks I created myself or blocks that I get from someone else. Now, I've been told that autocad comes with a library of blocks in plan and elevation view. How do I access them?
View 9 Replies View RelatedAutoCAD Architecture :: Wall Disappears In Plan View When Elevation Is Changed?
Aug 26, 2011I placed walls at 12'0" elevation as they wereconflicting with walls below (overlap). I can't see them in plan view - In 3D iso view they are visible.
View 4 Replies View RelatedAutoCAD Civil 3D :: Add An Object From A Profile View To A Plan View
May 29, 2013Is there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.
View 9 Replies View RelatedAutoCAD Architecture :: Object Not Visible On Plan View
Aug 2, 2012Autocad Architecture 2012: my dwg is fully visible in 3D View but partially visible in plan View. What could be causing this problem? See screen shot attached.
View 4 Replies View RelatedAutoCAD Civil 3D :: Point Elevation Takes On Elevation Of Snapped Object?
Dec 19, 2012When I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
AutoCad :: 2D Plan And Elevation To Simple 3D Model?
Jan 18, 2014I have a 2d plan and several elevations/sections and was wondering if it was possible to do a quick mock up of what it would look like in 3d?
Load drawings and just extrude somehow, or even import them in to revit?
Revit :: Reflecting Ceiling Plan In Plan View?
May 30, 2012I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies View RelatedAutoCAD Architecture :: Walls Missing In 3D View But Visible On Plan View?
Mar 26, 2012i draw up all of my walls, i connect them properly, cleanup etc. then i want to trim them with my roof slabs and what i see? i see my walls suddenly dissappear in 3d view but are still correctly shown on plan view? i know it has something to do with roofline because when i tried to project them automatically to ontu my roof slabs the walls dissappeared too!
View 1 Replies View RelatedAutoCAD Civil 3D :: Working Back And Forth From Plan View And Profile View
Jan 18, 2013I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies View RelatedAutoCAD Architecture :: 2013 Plan Elevation Label Rotation Angle?
Jun 14, 2012I went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
AutoCad 3D :: Complex Topographic Maps - Plan Out Elevation Markers Distance
Jul 14, 2012I am not at all familiar with complex topographic maps, ow to plan it out, elevation markers, the distance between the lines, which polyline to use? straight and arc or splines (to close later)..
View 9 Replies View RelatedAutoCAD 2013 :: Generate Layout Plan / Elevation - AEC Objects Alert
May 28, 2013We using CODEBOOK to generate the layout plan, elevation. When we insert form CODEBOOK this alert appear.
Last time, we work with ACAD 2011 normally. Got the problem when upgrade to 2013.
See the attached.
Revit :: Plan View Tags Referencing Wrong Dependent View?
Jan 10, 2012We have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets. Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list. If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically. I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order.
View 4 Replies View RelatedAutoCad 2D :: Making Leaf-like City Layout Plan
Sep 10, 2013I am designing a city with leaf-like layout. I've across a problem in the very beginning which is that i can't seem to understand the geometry involved in here. Let's i want to make a leaf shaped town such that it can have any desired area e.g. 800 acre with the same dimension like the leaf that added below. While experimenting with arc tool I've so far been able to do it but i would like to know the exact ways to do it.
Leaf.JPGGreen-Leaf-Texture-by-SpiralGraphic-on-deviantART.jpg
AutoCAD Civil 3D :: Making Pavement Grade Plan For Current Project
Feb 7, 2013I have been trying to find the best/most efficient way to make a pavement grade plan for my current project. The only two ways that I know of are:
1) Home Tab->points->Create Points-Alignments->Measure Alignment then select my mainline alignment, enter a profile, enter an offset to create the points. Then assigned elevations of the points to my "pavement" surface.
2) Make lines perpendicular to your alignment (I used sample lines, exploded them to a block reference)->Make a feature line and snap at each 25' segment->Assigned elevations of the feature line to my "pavement" surface->used custom line and curve labels to label start segment z value.
My issue with option 1) is on my project there are multiple curves and I don't know of anyway that I can have the labels follow my alignment. I think the way the alignment labels work is if I would edit the label I would have to manually edit the angle and with multiple curves I don't think this would work the best.
My issue with option 2) is my project is roughly 1.75 miles long with 8 lanes and 12' shoulders, I would have to make roughly 4000 elevation points on my feature lines.
AutoCAD 2013 :: Section (plan / Elevation / Section) Snapping To Point Cloud
Nov 1, 2013I'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
AutoCad :: 3D Piping In Plan View
Feb 15, 2013Having issues plotting. I have a sheet with 3d piping in plan view, viewport is set to Legacy Hidden as always. I have a 3DCLIP plane set to only see pipe at a certain elevation. When plotted, some of the pipe lines are missing. If I change the viewport display view, then the piping is fine but random objects show up that shouldn't b/c of my 3DCLIP plane.
View 0 Replies View RelatedAutoCAD Civil 3D :: How To View Contours At Elevation 550
Dec 28, 2012I have a surface with a bunch of contours. I want to view the contours at elevation 550. In Microstation there is a set display depth command. Is there a tool in autocad where I can view certain elevations.
I want to make layouts/viewports that are clipped to different elevations. For example I have a surface with 5' contours. I want to create multiple viewports on a sheet showing what each contour looks like at its elevation.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
AutoCAD Civil 3D :: 3D View Of Elevation Analysis?
Feb 23, 2012I've got an elevation analysis with a nice range of colours in plan which look fine but I want to display this in a 3D view for a presentation.
I selected the object and went to object viewer but I can't get the analysis in colour. I'm guessing I'm missing something obvious but can't figure out what...
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
AutoCAD 2010 :: Plan View Furniture Blocks?
Mar 12, 2012Are there places where I can find plan view furniture pieces for AutoCAD 2012? I have found some, but most are commercial. I'm looking for residential furniture like sofas, loveseats, and chairs in victorian era styles.
View 1 Replies View RelatedAutoCAD Civil 3D :: Xref'd Profiles In Plan View?
Aug 28, 2012I am simply xref'ing a profile drawing into a sheet drawing to print out. AS shown on the attached, when the profile comes into the xref I lose all the band data and the EG line does not come in as a dashed 2 line as the layer is set to. It almost looks as if the PL linetype generation is off for this line.
View 1 Replies View RelatedAutoCAD Civil 3D :: Superelevation Data In Plan View
Jul 12, 2007I found super elevation labeling for profile, but not for alignment in plan view. Is there a way to label alignment, f.x. in critical points of super elevation automatically?
View 2 Replies View RelatedAutoCAD 2013 :: Modelspace Locked To A Plan View
Apr 23, 2013I have received a drawing from a consultant that appears to be locked to a plan view. How this has been done and I would like to switch it off.
Just to be clear it is locked in the modelspace tab not a viewport.
AutoCad 2D :: Edited Window Now Missing In Plan (top) View
Dec 28, 2012I am using AutoCAD Architecture 2011. I've inserted 3 windows in an exterior wall. They all can be seen in Plan (top) view. I've gone back and changed the height of the windows. Now when I look in Plan (top) view, the windows I've changed the dimensions on are no longer visible.how to make these windows visible again in plan (top) view?
Note: These re-sized windows can be seen in any other perspective except Plan (top) view.
AutoCad :: Drawing Set Of Winder Stairs In Plan View
Nov 23, 2013I need drawing a set of winder stairs in plan view. I am using autocad 2008.
View 9 Replies View RelatedAutoCad :: How To Change Elevation Of Object
Jul 18, 2012Its been a while since I have needed to change the elevation of a object. The problem is that does not list the elevaation in the Properties manager on my quick access tool bar or in QP window. I have used it in the past but now its gone. I an using AutoCAD 2011. Ive tried to use the CUI to find it but no luck.
View 5 Replies View RelatedAutoCAD Civil 3D :: Getting Station And Elevation From Profile View
Oct 31, 2012I am using LISP in C3D 2012. I am trying to get the station and elevation of a point I pick in a profile view. I found the Method that will get that info, but I can';t seem to get the syntax right.This is the Method;
HRESULT FindStationAndElevationAtXY(
[in] double X,
[in] double Y,
[out] double * pStation,
[out] double * pElevation,
[out, optional] VARIANT * pInBounds
[code]...
AutoCAD Architecture :: Use AEC Dimension In Section / Elevation View In ACA?
Feb 3, 2011Can I use AEC Dimension in a Section/Elevation View in ACA? So, when an Wall height changes, the AEC will change too after refresh the section/elevation.
View 1 Replies View Related
