AutoCad :: Create 2x4 Ceiling Grid Hatch For Layout Planning
May 2, 2012
I'm trying to create a simple 2x4 ceiling grid hatch for layout planning, but AutoCAD keeps giving me an error when I try to use it.
Here's the custom hatch that I wrote at the very end of the acad.pat file:
*CGRID, 2x4 grid
0, 0,0, 0,48
90, 0,0, 0,24
When I load up ACAD, it shows the hatch in the selection, but after I've defined the area and I try to apply the hatch, I get this error in the command line:
Missing parameter on line 385.
View 6 Replies
ADVERTISEMENT
Feb 13, 2013
I want to add a ceiling grid to my rooms. I am using a hatch to do this. So I draw a polyline around my room and select the hatch net.
My hatch then displays at 600x600 within the room. The only thing I want is for the hatch to start from the center of the room and work outwards. This is so I have a center run of tiles and then they work outwards at 600mm each tile until they reach the outer wall and the last tile will be reduced equally at each side.
View 9 Replies
View Related
Feb 16, 2012
Revit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies
View Related
Mar 23, 2010
I'm using AutoCAD 2008 and trying to make a smart ceiling grid using the tools palette. The tool runs fine, however my grid doesn't show up in my drawing. I checked all my layers and they're fine. I think my ceiling grid visibility display is turned off.
Any command to turn it on? Checked the product, it gives me options to turn it on/off when it's already visible in a view, but this doesn't work since I can't see it at all.
View 6 Replies
View Related
Jan 23, 2012
I tried inserting a ceiling grid, command started fine, usual prompts....enter & no grid.
I switched to the work tab, that has a 3-d view and there is the grid. I cannot find what I did alter its visibility in model space.
ACA2011
Win 7 64
View 1 Replies
View Related
Jan 23, 2012
Is there an easy way to use space to generate a ceiling grid. My predicament is that when I create a space, the lines show up in Medium Detail and I have to switch to Reflected display configuration to see the grid. But when I am putting in the grid it asks me to choose the space, which is now not visible. Unless I change the display configuratiion, is there a way to pick the space while in the reflected display configuration.
Or better yet, is there a way to create a script that will toggle the space display on and off while in reflected.
View 2 Replies
View Related
Mar 28, 2012
I don't know why this isn't working for me today. I want to edit the Bay Size of my Ceiling Grid in one room. When I select the Grid..right click Properties and select the Bay Size, I can't seem to change the size.
View 2 Replies
View Related
Apr 17, 2012
I recently downloaded the trial version of Autocad Architecture 2013. I changed my main customization file to aca.cuix so that I would have the build panel. The build panel is now there, but it is not working. All the icons are questions marks and when I click on the ceiling grid icon it says 'unknown command'. How can I get the ceiling grid function to start working?
View 2 Replies
View Related
Oct 25, 2011
Is there a setting to export the grid lines of ACT ceiling in a 3D view to DWG?
I don't know if there is because I can't even get the grid lines to show in a 3d view. Right now the view shows the ACT ceiling as a simple geometric shape.
View 9 Replies
View Related
Oct 9, 2013
I'm using Revit 2014 & have not been able to fade the ceiling grid lines so they don't plot out so heavy on my dwgs. I've tried overriding graphics of these grids with half tone which didn't work then I tried transparency & that did not work. They either stay on or turn right off!
View 4 Replies
View Related
Nov 3, 2009
Are there any plans to add the simple yet productive feature of moving an object in the X and Y directions at the same time?Also, I would love to be able to select the ceiling grid and hit the space bar and have the grid rotate 90 degrees.
View 4 Replies
View Related
Dec 10, 2012
How do you create an RCP or reflected ceiling plan in AutoCad 2013? There used to be a place in View to choose it and then enter cut through height.
View 2 Replies
View Related
Jun 4, 2013
I have a problem when designing one building in 3d. The thing is i want to create a 3d model made only out of 3d solids. So there is this complex ceiling, I made out of 3 meshes and above it, in the above floor, there's a non complex plate.
[URL] ........
This meshes are made based on the actual dimensions of different sides of the floor, are unique and are good approximation of the actual building's ceiling. So, I want to make 3d solid that would have the same bottom shape and the same - even top as in the picture if the space between the objects would be filled out.
View 5 Replies
View Related
May 21, 2010
I received a drawing that has a layout with multiple mviews in it. There is a light grey grid showing in the layout, that I can't make disappear. Grid on / off command has no effect. Really it doesn't matter if the grid is showing, but it's so annoying! Creating a new layout would fix the problem, but is there an easier way to get rid of the grid?
View 9 Replies
View Related
Feb 7, 2013
I am working on creating a set of plans and have a couple of note pages that are generic and will not need to be change. I am creating a template with layers, layout tabs, styles, etc. I am trying to put these notes straight into a layout tab just simply by pasting them in there. The issue I am having is with the hatching on a couple of objects, the hatches appear correctly right off. When I save the drawing and reopen the hatches are a solid block, regen does not fix this. I can however explode the hatch and then undo the explode command and it appears correctly. Is there a way I can make the hatches appear correct everytime?
View 3 Replies
View Related
Sep 10, 2012
How to explode a 3d layout grid after creating it.
View 1 Replies
View Related
Nov 17, 2011
In ACAD 2012 if there is two viewport in a layout hatch shows up as solid. I tried the same in ACAD 2011 and everything works ok.
View 4 Replies
View Related
Aug 29, 2013
want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies
View Related
Nov 19, 2011
how create coordinate grid on layout in Civil 3D 2010-2011, such as this
View 9 Replies
View Related
Jul 24, 2012
Having trouble creating arrays of ceiling light fixtures in Revit 2013? It gives me this error message;
'Can't place inserts outside of hosts. These elements won't be copied'
I've adjusted all manner of settings to make sure the copies don't fall outside the limits of the host ceiling but without success. It only occurs with linear arrays on ceilings not radial arrays for ceilings or linear or radial arrays for walls?
View 9 Replies
View Related
Sep 24, 2013
I have access to the educational version of Autocad Civil 3D 2014. I am familiar with the program, but unfortunatley I can't access the Planning and Analysis Workspace in the workspace pulldown menu. Infact I can't find it anywhere. How I can download it? Or even customize my own tab so that I have a similar layout to the planning and analysis workspace
View 4 Replies
View Related
Jan 15, 2014
how I can create a sort of grill openings in the ceiling of an underground parking level? There are no ducts connected to it, it's just an opening between the underground level and the ground level, like a courtyard, for example?
View 1 Replies
View Related
Aug 12, 2013
I get this message FDO provider 'OSGeo.SHP.3.8' everytime I try to import polylines into shapefile format.
View 2 Replies
View Related
May 14, 2012
I want to draw up a large grid or table in AO sized paper. I will then get it laminated and use it to write down on the left hand column each company I see and sell to. Then beside the company running horizontally I want little check boxes that I can tick off with a marker to not when I last visited that company.
So how doe I make a large sized table with evenly spaced columns and rows etc.
I though that I could just select the table button and set how many rows etc then click and drag. This works, but I want to be able to enter in a value of say 100mm wide by 30mm high and set that for each grid.
The only setting like that is for the actual whole area of the grid/table not each individual cell. Can it be done like how I said?
View 3 Replies
View Related
Sep 30, 2011
when I create a pdf from my drawing some of the hatches change (simple line hatches will have a heavier line). it is fine in the dwg.
View 1 Replies
View Related
May 30, 2012
I am working on a drawing (not originally created by me) and cannot create any hatches at all. If I make a closed shape, select Hatch, and select an interior point, nothing at all happens. No hatch is created, no error messages are generated. The command simply appears to finish as normal but doesn't actually create anything.
View 9 Replies
View Related
Sep 9, 2013
I thought it interesting enough to share because of the odd discussions we've had around drives in recent months. a lot of the regular posters seem to be conspicuous by their absence since I got back from my trip. Have they all been at Photoshop World? URL....
View 1 Replies
View Related
Jan 8, 2011
How can i create new hatch? In hatch option, user define hatch option is given. So how can we define the new hatch?
View 6 Replies
View Related
Sep 30, 2011
when i create a pdf my hatch changes in certain areas (linetype seems to get thicker) i am using 2007?
View 3 Replies
View Related
Apr 16, 2013
the autocad can create points on grid? I must stipulate the points to be sampled in the field / map, and would be a nice increase for the company. I'm sending a map, and I need a point every 2500 m square. I managed to do manually. I picked a line and divide segments of it with the command point. But I had to use the "copy" in each row of dots and copy down.
The attachment is a map with 32,81 ha ( 328100 m 2). That is, I need 4 points per hectare (10,000 square meters) in total 131 dots ( points )
In short, it is possible, in this map make a grid of points 2500m square from each other?
View 9 Replies
View Related
Jan 4, 2014
I am using Autocad 2013 , and i have download many more hatch pattern from web , But i haven't know how to apply this hatch pattern in autocad 2013 .
View 1 Replies
View Related
