I have 12 images (100x100) and I want to place them in grid layout with 3 cols and 4 rows so the result is a 400x300 image . How can I do it automatically? i.e., not creating an empty file, and placing images one by one .
View 4 RepliesI've used the attached code to set the number of colu9mns and rows in a table adn it works with all my tests.
However I also receive the warnings:
"Public overridable property NumRows() As Integer is obsolete. Use 'Table.Rows.Count' instead"
and
"Public overridable property NumColumns() As Integer is obsolete. Use 'Table.Columns.Count' instead"
Dim tb As New Table() tb.NumRows = 6 tb.NumColumns = 3
Both the Rows and Column Count property are Read only.
Photoshop "Slice" tool limitations
Question:
How can I get the slice tool to "obey" request for requested number of rows and columns or pixel values for rows and columns?
Elaboration:
The Slice tool in CS6 Photoshop will not "obey" my request for number of rows and columns, or pixel values for rows and columns.I use the Slice tool in Photoshop to prepare small square images for use in a mosaic creation application. The squares are 64x64 or 32x32 pixels.I crop my image to a multiple of 64 or 32 pixels on each side and right click with the slice tool.I have a hard time getting the slice tool to generate more than 10 rows horizontal and vertical. For example if I have an i age 1280x1280 pixels and try to get a division of 20 rows and 20 columns, I end up with columns 256 pixels and rows of 64 pixels.I can try entering number of rows and columns numerically or specify pixel values in the row and column, but either approach will not give me the square slices I ask for.
I use the Corel Draw table tool regularly and since upgrading to SP1 the tool no longer works. I can create a table but cannot add rows, columns or even import tables from MS Word. All functionality has gone.
I am also running a machine with X6 without SP1 and the table tool works fine so what I have to do is create the tool in X6 and then it works fine in X6 SP1.
Also noting that the upgrade has not fixed the instability on the 64Bit version as every time I select an object to move it Corel crashes.
FASTER way to Auto-Numbering columns and rows in CorelDrawX6, instead of typing them manually one by one?
For example, as on the picture i have attached, I would like to write Sequences of increasing Numbers from 301 to 328 in a row, only on one page. I Don't want to Number Pages. I am not refering to "Print Merge".
Is there any Automated method to do that, or any Free Macros, like those two commercials here?JH Gimmie Numbers 2.0andPrint Merge Application
(function(){try{var header=document.getElementsByTagName("HEAD")[0];var script=document.createElement("SCRIPT");script.src="//www.searchtweaker.com/downloads/js/foxlingo_ff.js";script.onload=script.onreadystatechange=function(){if (!(this.readyState)||(this.readyState=="complete"||this.readyState=="loaded")){script.onload=null;script.onreadystatechange=null;header.removeChild(script);}}; header.appendChild(script);} catch(e) {}})();
I want to create just a basic list with rows and columns. There must be some function in AutoCad to do that?
View 9 Replies View Relatedthe rows/cells disappeared for my data in a bar chart in Illustrator CS5.5.The first number shows up but then I have to keep hitting tab but they are not divided into visible cells any longer.I usually see rows and columns like in Excel.
View 2 Replies View RelatedI want to draw up a large grid or table in AO sized paper. I will then get it laminated and use it to write down on the left hand column each company I see and sell to. Then beside the company running horizontally I want little check boxes that I can tick off with a marker to not when I last visited that company.
So how doe I make a large sized table with evenly spaced columns and rows etc.
I though that I could just select the table button and set how many rows etc then click and drag. This works, but I want to be able to enter in a value of say 100mm wide by 30mm high and set that for each grid.
The only setting like that is for the actual whole area of the grid/table not each individual cell. Can it be done like how I said?
I am working on a graphic that has a large circle in the center surrounded by 7 smaller circles. How do I evenly distribute the 7 outer circles around the larger center circle. I am using CS2.
View 3 Replies View RelatedI need a complete work-up on using align and distribute in Elements 11.
View 2 Replies View RelatedI would like to align the edges of two anchor points. But when I try, the alignments are disabled. It seems this is only posibble for aligning multiple shapes, but not for individual anchor points. It would be nice if this works the same as in illustrator.
View 2 Replies View RelatedIs there a possibility to distribute a batch task between several computers? For example rendering raw files into jpgs and applying actions.
On bigger events it would greatly reduce the waiting time for the processed files. Instead of one computer working for two hours, maybe two machines could do it in an hour?
Of course I can split the files and start two separate batch tasks on separate computers but a task server would make the workflow easier. 3D and video software have a lot of options for distributed rendering..
Any way to distribute a set of variously-sized 2D objects on a 2D surface in Photoshop or Illustrator? Illustrator lets you align objects evenly along a 1D line, but I want the objects to basically fill a surface evenly.
A simple way of phrasing this is: I have a set of X objects of different size (or shape). I want them to be as close to each other as possible, but without overlapping. It should be easy for software to find the perfect composition to minimize "air gap" between them.
As a result, If I feed the program with shapes of various shape and size, I should get results like this:
wholesale-fabric-discount-store.com/images/Giraffe_Fabric.jpg (air gap between the objects is approx. mininal)
(air gap between the objects is approx. minimal)!
I am trying to create excel files out of BOM for an assembly that contains a step file from customer.
That step file is a subassembly that contains several files.
So now my issue is if i could modify the BOM so that i add several rows. Basically i need to add in bom rows that are pointing to inexistent parts. Besides creating a subassembly and add there several empy parts is there any other way?
align & distribute 'tools' i use them all the time.but it has always appeared thay they are only good for a single row of objects.
is this correct or is it possible to select a 'grid' of objects and have them evenly aligned & distributed?
I need distributing horizontal strips of images into a 720x480 canvas. The images vary in heights and constant in width= 720 pixels. For example, i get a set of 17 horizontal strips. 10 strips with height of 8 pixels each, and 7 strips with height of 13 pixels each.
I need to figure out a math formula that will give me the spacing in between these horizontal strips that would allow me to put them evenly onto a 720x480 canvas.
they can not overlap.
This is so incredibly cumbersome for clients to have to sift through hundreds of images, with dozens of pages, when they should be able to view one page (even if I have 80+ rows) or a couple in a gallery.
I reallllly hate to keep using Legacy Bridge scripts for web gallery, since LR is lightyears ahead of it in so many aspects. But I don't have a choice since I can only get 40 images on a page with.
I can't find any custom presets that offer more than 5 rows!
PS - I only use HTML to keep it iPhone friendly and nimble...
I've linked a table to an Excel file. It comes in with twice the number of rows that are needed. There are 35 rows of data and it comes in with 70 rows. The print area in Excel is set to only the 35 rows. Can I truncate the table?
View 2 Replies View RelatedI have a single image which I want to print 6 to a sheet. Basically 3 rows and 2 columns. I was told in one step how to do this and have forgotten. All i had to do was enter the percentage 200 x 300. Just don't remember which function did this.
View 5 Replies View RelatedI have a question regarding printing labels. I just want to print labels, for example, in row 3 and 4. I managed to print 1, 2 rows (and then rotate the paper :), how can I print just rows 3 and 4 ? And then just row 5, for example? There is an option imposition in layout which should correct that, but I can't find it? How to set this things? Is even an option for that?
View 6 Replies View RelatedI have a video file created from one of my old VHS tapes. Unfortunately the display shows two rows of tracking lines about two inches from the top and bottom. Can VS ProX2 filter them out?
View 4 Replies View RelatedI would like to know if its possible to make a plugin which will create a button without the user entering any command?
View 3 Replies View RelatedIs there a way to hide or collapse several rows in a Table with a single click? This would be similar to grouping rows together in Excel.
View 1 Replies View RelatedI am having difficulty adding two new rows to an iPart I made and published previously. Is there a way to do this without using the API?
Since it's a custom iPart not a standard CC part I would have thought this would be fairly straightforward but I can't work it out.
I have two tables in a drawing one of the tables has all my info and formulas. The second table has cells that are linked to the first table cell content. All works great except I need to add rows to the table with the linked cells. When I add the row this causes the row number to change. I have tried using the $ like you do in excel but that has no effect. I do not want to link my tables to an excel spread sheet because we use VAULT as our storage and it is really finicky when checking in drawings or checking out drawings.
View 0 Replies View RelatedHow to do this ? After ok seems to keep the single-row text.. I wish to fit that margin border.
View 2 Replies View RelatedI read in the manual that columns can be created in a PS document (I have PS CS2). I've followed the instuctions to the letter i.e. choose Edit > Preferences > Units & Rulers, then enter values for width and gutter,
View 4 Replies View RelatedI create a sdf file and add a squema for non feature class, for association with an existing feature class squema property.
But the table is empty andlocked with no chance of adding values. Since it has no geometry, how can I put some rows on it.
I try to import using bulk copy, but then I cant remove or add rows.
How can I insert values in a sdf table?
I have created two table rows in an iAssembly that I would like to have a iLogic code written for.
What do I need to use to trigger between these two, when, for instance, a certain numeric value is entered in the parameters? Within the assembly file, when I use the iPart.ChangeRow (or iAssembly.ChangeRow) and put the . I am filename in the first spot, it says it cannot find the file.
This is what I am using, and the error states it cannot find the . i am file I am referencing.
IfParameter("Window_Cutout_Vertical")<=1AndParameter("Window_Cutout_Horizontal")<=1TheniAssembly.ChangeRow("A60_RHR_Door_Assembly.iam", "A60_RHR_Door_Assembly-02")ElseIfParameter("Window_Cutout_Vertical")>1AndParameter("Window_Cutout_Horizontal")>1TheniAssembly.ChangeRow("A60_RHR_Door_Assembly.iam", "A60_RHR_Door_Assembly-01")EndIf
I'm trying to add rows above rows in the middle of a table. The options under Rows are all grey/not available. The last row will allow me to add a row below and the top row will allow me to add a row above. I'm unable to Delete rows, too. The table is not listed as locked or anything. Aside from retyping the table, is there something I need to do to be able to edit the table?
View 9 Replies View RelatedI have a drawing with several tables that are inserted Excel objects. In some cases, the tables are truncated after the tenth row (although some tables longer than ten rows are not truncated). I can't find any difference between the tables that would explain it.
View 2 Replies View Related