How do you get MTEXT columns to go from left to right? The default is left to right. When the mtext gets to the column limit it creates another column to the right. I want the column to be on the left. I've done this 'before and I thought the variable was available in the properties bar but I can't find how to do this anymore.
Right to Left is the way of drawings.
Why my MTEXT columns become very narrow and tall after I exit and re-open a drawing?
View 3 Replies View RelatedUsing LT 2011
In MS Word I can have some text that is all in one full width column, then put in a break and have a later section in multiple columns, then a break and go back to one column.
I want to do something similar in ACAD.
Here is how I want it to look.
GENERAL CONDITIONS
1. LOTS OF BOILERPLATE 2. LOTS MORE BOILERPLATE
Here is how MText does it.
GENERAL CONDITIONS 2. LOTS MORE BOILERPLATE
1. LOTS OF BOILERPLATE
Is there a way to separate sections, or do I need to make the "GENERAL CONDITIONS" part a separate mtext object?
When i type "qleader" and go to settings and then check the "Always left justify" option under MText Options it will not save. I go open up another drawing and have to do this again. Is there anyway for it to keep the setting?
View 4 Replies View RelatedI'm modelling columns in-place. I have given the first one a Type Mark name but when i copy it the Type Name does not copy with it and the count in my schedule remains at 1.
Due to the shape of the member i had to model it as an in-place family.
I have been trying to add beams to a layout of columns and some of them (not all) are behaving oddly. Instead of the beam trimming square at the side of the columns, the column and beam are joining with a mitered connection. The same is happening with some of the intersecting beams...a 45 degree miter on each beam.
There must be some setting that I have inadvertantly changed but I cannot find what it is. Changing trimming parameters in the Properties panel that seem like they should be involved, has no effect. And neither does cycling, via the Control key, the connection parameter when the beams are placed.
I have a series of 3d walls in autocad Architecture 2012 and an existing CAD 2d structural column layout.
I need to remove/cut or trim the wall around the HSS columns on a floor plan. The walls show the consttruction of the wall and I can't seem to create a void or mass to cut out around the column. Is there an easy way of doing this so that I can just place this in a block to auto cut the wall. My hope was to create a column block so that I can just drop the HSS columns wherever i want them.
I know i can use a wipeout to clear the area however, that is not ideal as we have other linework that need to be visible.
We are using ACA 2011. When I look to place a default Steel Column from the Design tab of the Design tool palette, I see no optoins re: the make-up of the column, only the length - the column only shows as a generic extruded box. Are there I-Beam, C-Beam profiles loaded anywhere in the content that I can access.
View 3 Replies View RelatedWhy doesn't generate space recognise columns?????
View 2 Replies View RelatedI have modeled a house with some colums supporting a deck. Ideally I would like my colums to be round with a spiral twist.. But would be happy to know how to change the default square into a round colum.
View 1 Replies View RelatedI am having issues with not being able to put in a column on an angle when using Revit Architecture. I read a troubleshoot guide and you can do it using Revit Structure, however Architecture is a different story.Why is this, and more importantly how can I put a column in on an angle.
View 1 Replies View Relatedwhat's the best way to create a block that has the MTEXT in it?
Meaning whenever I insert this particular blcok, I can easily edit the text while it automatically? to the middle point of the wall?
The bottom of a diagonally stacked fraction in Mtext aligns to the baseline of the string, which pushes the number with a fraction upward, which looks bad- see attached. Can this be corrected?
View 2 Replies View RelatedI am using mtext and would like to put the ruler over the top of the text, not underneath it how do I change this.
View 4 Replies View RelatedI have a detail section of millwork ... and some of the text is bold and some are not. But the weird thing is that all the text is from the same style, none of the text is bold and they are all the same size. So why are some bold and some not? See attached, running Autocad Architecture 2011 on XP 64.
View 9 Replies View RelatedI have a workstation which has Express Tools installed and working properly, except the 'convert text to mtext' command does not appear to be working. The other Express Tools commands are working properly.
View 5 Replies View RelatedIs there a way to set the default text size when using mtext with an annotative text style?
I have an annotative text style I use for everything. I have the height set to 0 in the style. In MTEXT the height always defaults to 1/4" which I never use. Is there a way to make it default to 1/8" text? It is annoying to have to have to change it every single time I use mtext.
The height is usually the paper text height but sometimes within a viewport the height is the model space height instead of the paper height. I don't know why it is different in some viewports but I would like to have it consistant.
I've been having this issue happen repeatedly, but not consistently. In a new file, I adjust the width of an mtext box so that the text wraps into multiple lines. When I next open the file, all mtext boxes are back at a wider width so that the text is all on one line. The start of the text is also usually in a different location. This was happening on 2011/XP and now on 2012/Windows7.
View 5 Replies View RelatedArchitecture 2009 running on Windows 7. Dell Precision T5400 with a Quadro FX570 graphics card.
I have lately been having some issues with text in Architecture 2009. I first noticed that within Mtext, when you hit the "UPPERCASE" or "lowercase" buttons, the text disappears in the editor, and no changes are made. Not the end of the world, but not handy.
Then it stopped letting me type in Mtext boxes at all. The return key seemed to work, but nothing else. Then it started converting text typed into Mtext boxes into (I think) Chinese characters. Really not handy. At this point I decided to try to reinstall. First I tried a repair, then reinstalled over the existing installation, then uninstalled completely and reinstalled from the disk. I've also done a windows restore, though as this has slowly been falling apart, I'm not sure when I should restore back to.
I have Mtext basic functionality back, but the "UPPERCASE" and "lowercase" buttons still make the text disappear.
Not sure if it's related, but I also get a Fatal Error e06d7363h at 758bd36fh about 4 or 5 times a day. Usually it's associated with the open command (ctrl+o), but sometimes it just happens at random.
I have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View RelatedTool to combine multiple pieces of Mtext into a single Mtext with paragraphs?
View 9 Replies View RelatedWhy is this happening?
The dwg was fine, then it crashed while changing from modle space to paper space...
When i recovered the dwg, EVERY MTEXT I try to edit becomes rotated vertically and stays that way when i close the edit box...
I do not recall hitting any buttons or making any keystrokes without my knowing...
Is there a way to get my text back to Horizontal and stay that way?
I tried setting the MTEXTFIXED to: 0, 1 & 2.
NONE of these options changed anything.
I NEED to have this fixed. more importantly, i need to know why this is happening sop that i can take steps to prevent this happening in the future...
I am currently working with the latest CAD available.
I have numerous MText paragraphs that I need to combine into a single piece of MText. I want the paragraphs preserved in the final piece. I've found some routines that can combine pieces of MText but I don't know if they preserve the paragraphs.I have DotSoft Toolpac but it doesn't seem up to the task. C
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
Autocad Express Tools allows converting text to mtext. How would I be able to combine multiple mtext into a single mtext?
View 7 Replies View RelatedI need to mix left to right and right to left (hebrew) text in a textbox. How can I do that? If I copy/paste hebrew text the text is inserted as if it was left to right, that is: reversed. Can I somehow work around that?
View 2 Replies View RelatedI just bought Photoshop CS6 and it seems that it isn't working properly. I run Windows 7. The left click and left alt are not working. The buttons work perfectly on other programs.
View 1 Replies View RelatedIs there a way to get columns in form? I would like to put
Hole F Type { List the types} Hole F Location {input box}
Hole N Type { List the types} Hole N Location {input box}
Hole G Type { List the types} Hole G Location {input box}
If not this form will be off the monitor.
I created a couple of files and saved each in SHP and SDF file formats. The only problem I am having is that when I reconnect to these files (in a different autocad file) using FDO and viewing the Data Table the columns are all displayed in alphabetical order, not the order in which they were orginally created.
View 3 Replies View RelatedHow in AutoCAD 2012 to be able to extract more than 256 columns worth of attributes per block?
It keeps giving me an error saying that excel won't allow it... excel has had more columns than 256 since 2007!?!?!
Or is there a third party extraction tool that I can use that extracts information in the same way the AutoCAD one does?
I'm doing a revision rearrangement and would like to add to the BOM New, Existing, and Relocated properties. The problem is that each individual component may be unique. Ie. I have a desk w/ 3 identical monitors. One monitor is existing and the others are new. I'd like to have the BOM show that I have 3 monitors, 2 are new and 1 is existing. The BOM would have 4 columns, one for the total number of parts and 3 for the New, Existing, and Relocated counts.
I don't mind if the new columns need to be manually updated.
I've used the attached code to set the number of colu9mns and rows in a table adn it works with all my tests.
However I also receive the warnings:
"Public overridable property NumRows() As Integer is obsolete. Use 'Table.Rows.Count' instead"
and
"Public overridable property NumColumns() As Integer is obsolete. Use 'Table.Columns.Count' instead"
Dim tb As New Table() tb.NumRows = 6 tb.NumColumns = 3
Both the Rows and Column Count property are Read only.
