I have a detail section of millwork ... and some of the text is bold and some are not. But the weird thing is that all the text is from the same style, none of the text is bold and they are all the same size. So why are some bold and some not? See attached, running Autocad Architecture 2011 on XP 64.
View 9 RepliesI typicaly use romans for my text, however it doesnt allow you to bold or use italics.
Is there a way to change this, or is there a font that is very similar that will let you bold and italic?
im using CAD07 &06 when i print out a drawing with lots of text some of it come out bold and some normal yet they are all the same font/height/size etc in the dwg?
does it make a diff if its mtext or single line text?
I am using mtext and would like to put the ruler over the top of the text, not underneath it how do I change this.
View 4 Replies View RelatedI have a workstation which has Express Tools installed and working properly, except the 'convert text to mtext' command does not appear to be working. The other Express Tools commands are working properly.
View 5 Replies View RelatedIs there a way to set the default text size when using mtext with an annotative text style?
I have an annotative text style I use for everything. I have the height set to 0 in the style. In MTEXT the height always defaults to 1/4" which I never use. Is there a way to make it default to 1/8" text? It is annoying to have to have to change it every single time I use mtext.
The height is usually the paper text height but sometimes within a viewport the height is the model space height instead of the paper height. I don't know why it is different in some viewports but I would like to have it consistant.
Architecture 2009 running on Windows 7. Dell Precision T5400 with a Quadro FX570 graphics card.
I have lately been having some issues with text in Architecture 2009. I first noticed that within Mtext, when you hit the "UPPERCASE" or "lowercase" buttons, the text disappears in the editor, and no changes are made. Not the end of the world, but not handy.
Then it stopped letting me type in Mtext boxes at all. The return key seemed to work, but nothing else. Then it started converting text typed into Mtext boxes into (I think) Chinese characters. Really not handy. At this point I decided to try to reinstall. First I tried a repair, then reinstalled over the existing installation, then uninstalled completely and reinstalled from the disk. I've also done a windows restore, though as this has slowly been falling apart, I'm not sure when I should restore back to.
I have Mtext basic functionality back, but the "UPPERCASE" and "lowercase" buttons still make the text disappear.
Not sure if it's related, but I also get a Fatal Error e06d7363h at 758bd36fh about 4 or 5 times a day. Usually it's associated with the open command (ctrl+o), but sometimes it just happens at random.
I have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View RelatedImpact URW D Bold font? (.TTF for windows)
find any difference with Windows Impact font, that is come with windows, except character spacing.
We're transitioning from ACA2012 to ACA2014. I'm also trying to get away from putting my blocks in DesignCenter and having our users insert Annotation (tags) from the Ribbon bar.
When I insert our door tag (or any schedule tag) from the ribbon bar, it is automatically changing the text style to the current text style. I'd rather it just use the style built into the tag. I know that can be controlled in the Designcenter content (right-click) - but how do I change that from the ribbon bar?
I am modifying an existing logo for a company. The font used in the original is Helvetica Bold.For ease of explanation, we can assume that the company has not licensed the font at all.
If I purchase Helvetica Bold from linotype: URL....
and make a logo consisting of an logo mark and logotype "IHGMISAHIC, CPL" (scrambled) using the newly purchased Helvetica Bold font.Register the logo to be used on all company stationery and signage, etc.
We are using AutoCAD Architecture 2013 and AutoCAD LT 2013 in our office-just upgraded. Now, whenever we go into a drawing that uses the Archstyle (Shx) font and try to copy or paste any text, the font changes to simplex. We have to exit completely out of AutoCAD to recover the font.
View 9 Replies View RelatedI can't change to bold or italic versions of a font. Even when it is included in the options for a font.
It will show the preview of the change, but when I select it, the display goes back to the vanilla version.
I am trying to bold a font. The font has an astrick next to it ***** and I cannot get the font to change from regular to bold or extra bold.
View 1 Replies View RelatedI need to assign a font when creating my mText and don't know how. I'm working in AutoCAD 2009 .net api.
View 0 Replies View RelatedI am using autocad 2011, in that i have some MTEXT's , i am trying to make them at same height & same font, i am selecting the all fonts & then properties & then making all height "3" & font style "arial" but if i double clicked on text it's showing me "1.37" height & "calibri" font
View 2 Replies View RelatedIs there a way to change multiple MTexts at once to a certain font? I don't have the full version, only AutoCAD LT 2013 so unfortunately I don't have the fancy express tools or lisps.
I have at least 1000 MTexts that need to be changed. This will take a long time if I have to activate each one and change them individually.
the text always appears bold both on screen and printed in my student work. My tutor has now commented as it detracts from the thickness of picture lines. So i need to figure out how to change this. I have never selected bold.
In the 2D diagram I am working on at the moment i am using single line text, dimension text and text within a table key on the side. It is all the same in terms of boldness. I have seen other students work with less bold text and i need mine to be like this.
I have selcted standard style, size 6.000 and it is not annotative. Is text affected by lineweight or layers?
Every so often, and I have not been able to determine common cause, when editing mtext in the default mtext editor the text in the editor will display as some other font - handletter, TXT, whatever - something other than the Romans I typically use. And both the style and the font are set to Romans. When I finish editing, the final text in the drawing is correct, so it is more an annoyance than anything.
View 2 Replies View RelatedI am using autocad 08 LT and everytime i plot to pdf using standard cad dwg to pdf.pc3 the txt turns out bold.
View 9 Replies View RelatedWhen using TEXT or DTEXT I can add centerline, 1/4, or 1/2 symbols while using the ROMANS font.
It would make sense to me that when I am using MTEXT, this should apply. However when I try to insert the symbols this is what happens: My text style stays the same, but the font gets changed to ISOCPEUR and symbols have a bold type appearance.
In 2008, one could create some Mtext using a type font named ISOCPEUR and type of line of text. One could then go to the Express Tools/text/explode text function. That would explode the text and one could then manipulate it so that one had a bunch of letters that were polylines. One could then extrude the polylines and either add or subtract them from a solid and create either recessed or proud lettering on a part. That meant you could mark a casting or a molded part just like in the real world.
But in the fully advanced, super dooper, state-of-the-art, fantasmagorical (sp) AutoCAD 2013, if one goes to Express Tools and selects the explode function, the command TXTEXP is not recognized as a valid command.
I have 26000 mtext that has overridden font inside the property. set to bold and print out look like crap.
see attached i want all the text to look like the text on the left. right is what they look like now. i just copied a few as an example.
can't find the font property in the mtext object:
PrivateSub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) HandlesButton1.Click
Dim doc AsDocument = Application.DocumentManager.MdiActiveDocument
Dim db AsDatabase = doc.Database
[code]......
what's the best way to create a block that has the MTEXT in it?
Meaning whenever I insert this particular blcok, I can easily edit the text while it automatically? to the middle point of the wall?
This is a problem running through only some of my drawings, I have tried forcing the z value to 0, no change. I have tried setting the ucs to current, world, no change. I have tried to flatten the text, no change.
View 9 Replies View RelatedI have dwg files with Calibri font (our standard font style) that I am trying to xref into one drawing (a bunch of detail dwgs essentially). The detail looks fine in its own dwg - but when I xref the dwg into another dwg some text elements appear bold. I've check ALL of my font styles - nothing is selected to "bold"... I scale the x,y and z to the same scale.
View 7 Replies View RelatedI have read many topics that talk about TTF text printing bold under various circumstances, but have not found one addressing my exact issue. I have attached a PDF with which I hope to illustrate my problem.
I have a non-annotative, Scale = 1, all elevations = 0, block; My text is PDF's as text whenever the block is left at 90 or is exploded then rotated. But whenever the blocked is rotated (any amount) the text is no longer interpreted as text, it prints bold.
I need to be able to align my blocks to other, rotated, objects in both model and paper space; so this issue is causing my a fair amount of grief. I have been told switching to a shx font is out of the question.
I have problem this Arial text style. Everytime i moved the text it looks like a bold text.
I have noticed only if the snap is ON. but if I OFF the snap the text is okay. even the attribute is the same.
why the mtext in the blue viewport prints bold (attached) when the rest of the text in an other viewport or paperscape prints fine? You can see this in the plot preview when zoomed far enough out.
This is plaguing many drawings thoughout the company I work for and no one can figure it out. The only work around I have been able to come up with print everything to PDF first and then to the plotter which is a real pain.
If it is possible to change the default font used when inserting a symbol in mtext. e.g. the centerline symbol.
At the moment the font used is isocpeur and I would like it to be Romans.
How do you get MTEXT columns to go from left to right? The default is left to right. When the mtext gets to the column limit it creates another column to the right. I want the column to be on the left. I've done this 'before and I thought the variable was available in the properties bar but I can't find how to do this anymore.
Right to Left is the way of drawings.