what's the best way to create a block that has the MTEXT in it?
Meaning whenever I insert this particular blcok, I can easily edit the text while it automatically? to the middle point of the wall?
How do you get MTEXT columns to go from left to right? The default is left to right. When the mtext gets to the column limit it creates another column to the right. I want the column to be on the left. I've done this 'before and I thought the variable was available in the properties bar but I can't find how to do this anymore.
Right to Left is the way of drawings.
The bottom of a diagonally stacked fraction in Mtext aligns to the baseline of the string, which pushes the number with a fraction upward, which looks bad- see attached. Can this be corrected?
View 2 Replies View RelatedI am using mtext and would like to put the ruler over the top of the text, not underneath it how do I change this.
View 4 Replies View RelatedI have a detail section of millwork ... and some of the text is bold and some are not. But the weird thing is that all the text is from the same style, none of the text is bold and they are all the same size. So why are some bold and some not? See attached, running Autocad Architecture 2011 on XP 64.
View 9 Replies View RelatedI have a workstation which has Express Tools installed and working properly, except the 'convert text to mtext' command does not appear to be working. The other Express Tools commands are working properly.
View 5 Replies View RelatedIs there a way to set the default text size when using mtext with an annotative text style?
I have an annotative text style I use for everything. I have the height set to 0 in the style. In MTEXT the height always defaults to 1/4" which I never use. Is there a way to make it default to 1/8" text? It is annoying to have to have to change it every single time I use mtext.
The height is usually the paper text height but sometimes within a viewport the height is the model space height instead of the paper height. I don't know why it is different in some viewports but I would like to have it consistant.
I have a dynamic block with mostly visibility parameters and a couple stretch and array actions. I am using multi leaders with fields that are supposed to reference custom properties from the sheet set. I have mtext with fields in paper space that are referencing the custom properties fine but none of the blocks with fields are working.
block1.dwg
Is there a way to create an attribute or MTEXT in a block where part of it is User defined and the other part is constant?
e.g.
"AUTOCAD = 12345 LAYERS"
Where "AUTOCAD =" and "LAYERS" are constant
and
"12345" is the user defined part.
The reason why I would like this is because i want to be able to Middle Center Justify the text and if i were to create 3 separate texts then it wouldn't be good (2 texts and 1 attdef)
Possible to use a block, such as a hex or circle with a number centered, instead of the out of the box number with a period? I have Key Notes that need numbers with a hex, and Construction notes, that need numbers in a circle. I can label these items with multileaders with a user defined block, but when I type out the notes using mtext, I want to use the exact same blocks to number the notes that correspond with my multileader label. I have been manually inserting blocks along side of my un-numbered mtext notes.
View 4 Replies View RelatedI have a dynamic block.
It has length and width stretch actions activated by grips. (Works fine).
It has an attribute for the user to type in a height value. (attribute insert box appears on block insert and when double clicking block).
It has Mtext "worktop [field] High" the [field] is looking at the attribute value so in theory should return the value the user types. But no only ---- shows. regen/regenall/battman fieldeval 31
Am I missing something i have pointed the field to tag/prompt as test and they show up in the mtext.
Why my MTEXT columns become very narrow and tall after I exit and re-open a drawing?
View 3 Replies View RelatedI have a block containing several parts blocks. When I explode the main block all of the parts are exploded back to lines. I have used both "explode" and "xplode" and have the same results. How can I explode so I have my components as blocks?
View 6 Replies View RelatedI've been having this issue happen repeatedly, but not consistently. In a new file, I adjust the width of an mtext box so that the text wraps into multiple lines. When I next open the file, all mtext boxes are back at a wider width so that the text is all on one line. The start of the text is also usually in a different location. This was happening on 2011/XP and now on 2012/Windows7.
View 5 Replies View RelatedI need to lay one of our existing blocks ontop of every power outlet on a floorplan (the power outlets are currently shown as a simple shape (eg. either a rectangle, triangle or circle) with text next to it.
There are hundreds of power outlets, so if there is a lisp routine for replacing any part of the power outlet with the block, eg. replacing text/mtext with a block or replacing a pline with a block.
I have found a very successful lisp routine for replacing circles with blocks, but this obviously only works on the power outlets that are shown as circles. So a simpler way of looking at it could be a lisp for drawing a circle around mtext/text then I could simply use the circle to block lisp to place the blocks.
Architecture 2009 running on Windows 7. Dell Precision T5400 with a Quadro FX570 graphics card.
I have lately been having some issues with text in Architecture 2009. I first noticed that within Mtext, when you hit the "UPPERCASE" or "lowercase" buttons, the text disappears in the editor, and no changes are made. Not the end of the world, but not handy.
Then it stopped letting me type in Mtext boxes at all. The return key seemed to work, but nothing else. Then it started converting text typed into Mtext boxes into (I think) Chinese characters. Really not handy. At this point I decided to try to reinstall. First I tried a repair, then reinstalled over the existing installation, then uninstalled completely and reinstalled from the disk. I've also done a windows restore, though as this has slowly been falling apart, I'm not sure when I should restore back to.
I have Mtext basic functionality back, but the "UPPERCASE" and "lowercase" buttons still make the text disappear.
Not sure if it's related, but I also get a Fatal Error e06d7363h at 758bd36fh about 4 or 5 times a day. Usually it's associated with the open command (ctrl+o), but sometimes it just happens at random.
I have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View RelatedTool to combine multiple pieces of Mtext into a single Mtext with paragraphs?
View 9 Replies View RelatedWhy is this happening?
The dwg was fine, then it crashed while changing from modle space to paper space...
When i recovered the dwg, EVERY MTEXT I try to edit becomes rotated vertically and stays that way when i close the edit box...
I do not recall hitting any buttons or making any keystrokes without my knowing...
Is there a way to get my text back to Horizontal and stay that way?
I tried setting the MTEXTFIXED to: 0, 1 & 2.
NONE of these options changed anything.
I NEED to have this fixed. more importantly, i need to know why this is happening sop that i can take steps to prevent this happening in the future...
I am currently working with the latest CAD available.
I have numerous MText paragraphs that I need to combine into a single piece of MText. I want the paragraphs preserved in the final piece. I've found some routines that can combine pieces of MText but I don't know if they preserve the paragraphs.I have DotSoft Toolpac but it doesn't seem up to the task. C
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
Autocad Express Tools allows converting text to mtext. How would I be able to combine multiple mtext into a single mtext?
View 7 Replies View RelatedIs there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
ACA2011
Is it possible to create a block with a 'mask' or 'wipeout', or whatever ACAD has, that is in the block so that when inserted, it blocks out whatever is behind it? I need to create a sprinkler symbol for a reflected ceiling plan (RCP), but my RCP has a lot of graphic hatching and needs to be blocked out wherever I insert this sprinkler block.
Why I can’t see this title block, it opens fine with no errors, but I cant find it in drawing, when I open it separately then it’s all fine but when I importing it to other drawing I cant find it.
[URL]
I have revived an old project that was started about 2 years ago. I went to attach my title block in paper space and the drawing was itty bitty.
Seemed unusual because in another layout the title block is there with the same page setups etc.
Then I looked at the block units and they were set to mm. Can it be changed? If so how? Or am I completely hooped?
ACA2011
Win7 64
I'm starting to wonder if I need to reset my program. When I click on my blocks, it won't allow me into block editor. I checked, and my Blockeditlock variable is set to zero, which should allow me in. But alas, it does not. When I type in "blockeditor" it says "read only". Which it's never done before.
View 3 Replies View RelatedIn AutoCAD Architecture 2012, is it possible to change the 3D window block from standard white color to another?
View 6 Replies View Relateddynamic block in a drawing - when i make a change in the block editor, it doesn`t apply in the model space although i save all the changes. There is also another dynamic block and this time everything is working properly - all the saved changes appear in the model space. The only difference between the two blocks is that the first one has attributes. I think attributes should not be the reason for not applying changes, but i just don't know.
View 1 Replies View RelatedI am using ACA 2009 and am experiencing something new with attributed blocks. When I insert the block, a copy of the block is placed at what seems to be an arbitrary distance away. As I fill in the boxes for each attribute, it appears in the image away from the insertion point. After I am done, the completed block appears filled out where it was inserted. I have never seen this before. Is there a setting affecting this?
View 2 Replies View Relatedis it possible to tag a multi-view block?
i.e. I have a outlet recept thats a MVB. I have it linked to the space with has the circuit number for the electrical panel. Is it possible to tag a MVB similar to tagging a window?
spaceobjects property set:
spaceobjects:circ_number (manual property set)
also has a location set
recept property set (connected to the MVB of the receptacle):
formula pulls the circ number from the spaceobjects
Why can I not check the Annotative Scale box for the attribute? Please see attached. The circle scales up and down but I only see the text in the 1/8" scale and but not in the 3/16" scale. The 3/16" scale is selected in the attributes scale box.
View 2 Replies View Related