Why I can’t see this title block, it opens fine with no errors, but I cant find it in drawing, when I open it separately then it’s all fine but when I importing it to other drawing I cant find it.
[URL]
One of the guys here has created a title block which has a scale field in it, this field reads the scale at which the title block is brought in, by use of an invisible attribute (he used the block in model space so that's why I scale them up). When he xref the dwg into my main drawing all is fine and the scales are as they should be but when he prints, the scales all show 1:1 on the print and in the main drawing. Could this be due to the fact that the xref is brought in at 1:1? But we can't see why this would change it as the block is obviously still at e.g. 1:50 in the xref.
[URL]
I am attempting to create my first Title Block with Attributes. I came across this online demo that suggests navigating to the "Projects" Tab - then selectign the "Title Block Setup" tab. I am using CAD 2012 and spent the last hour searching for this command. It does not appear on my navigation or tool palletes. URL....
View 2 Replies View RelatedI was presented with a little renovation project and need to setup my own drawing. I've worked on CAD for a number of years while at a structural firm, an engineering firm and took classes in school but one thing I never had to do was setup was my own professional drawing from scratch. I know enough that it's crucial I start off on the foot. The engineering firm I worked at had everything ready so whenever I used CAD it was in an existing drawing or preparing a detail which the drafters imported. When I did some drafting work for an architect, he also had the drawing setup for me.
Since I'm now on my own I need to setup my own template drawing with a title block, layers, etc. Whats the best route for setting up my own sheets?
At my firm we always worked in a 1:1 scale & engineering units but since I'm doing floor plans for renovation work I plan on using the industry standard.
I've created a sheet template that includes Fields to populate the sheet with the Project Name and location among others like scale, etc. When I create the new sheet in the project navigator most of the fields populate with the correct information based on the parameters set in the project. However, it consistantly does not populate the Project name and location. When I click the field and ensure that the attribute is set correctly then it renders the correct information. The problem is this ends up being a manual operation yet it still reads as a smart tag. Why do these not populate automatically?
Here's my process:
Create dwt for sheet file and include xref of title block.
Create a block with attributes that link to AEC Project, CurrentSheetTitle, etc. and insert into dwt.
In project navigator I create new sheet and select my template.
Information does not populate.
But when I view the block and close (no edits) it then links.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedWe have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
How to convert existing 2d autocad title block into Revit title block template?
View 7 Replies View RelatedAutocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
How do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedIs it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedI'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
I have a block containing several parts blocks. When I explode the main block all of the parts are exploded back to lines. I have used both "explode" and "xplode" and have the same results. How can I explode so I have my components as blocks?
View 6 Replies View RelatedI have a problem in which when i set up my title block templates, when i set them up and keep my template inside the dashed area the printed dwg is either cropped or too far inside so it has to be well outside at the top to print within 10 mm of the actual paper, attached is an image of how i have to do it to make it print within 10 mm of the edge of the paper print.
View 3 Replies View RelatedI'm trying to take my title blocks that I have setup in Civil 3D and would like to use them in ArcGIS in my layouts. A company I used to work with did have it setup but I was not part of the setup.
View 2 Replies View RelatedI have a A1 title block in model space that I like the look of. I'd like to duplicate this in A3 and A4.Is there a way that I can scale the A1 dimensions to A3 and A4 to avoid having to redraw them again with the appropriate dimensions?
View 9 Replies View Relatedi have a title block in the layout tab which i use for all new docs. when starting a new drawing i open my old one, delete the drawings and save it with a new name - this way i always have my title block how i want it in the Layout 1 tab. this has worked for me so far. but now I need to create an A3 print out.
i have created the picture that i need in modelspace but when i click in the viewport within the layout and select the scale that I have been asked to use, the pic becomes too big for the page.
when i go into page setup i can select a3 and preview this but it just shows my a4 page in the middle of an a3 page. so how to i make the titleblock and viewport bigger (to fit a3)?
I was able to draw A1, A3 and A4 title blocks in model space before giving each of these title block drawings a layout paperspace tab at the correct paper size.
I wanted to be able to start new drawings with the title blocks and paper sizes already done.
But what happens when the beginning of a new drawing project is with a drawing that someone else has already done? I am starting a new project and I would like to focus in one one room in a large building. This means that I plan to end up with a 1:50 drawing of a room on my pre-set A3 sheet and title block.
Do I import this person's drawing into my drawing of the three title blocks in model space with the three paperspace tabs or do I import the title blocks into the other person's floor plans?
How to add a new sheet with my title block. I am a little confused on this so far. I have read the autodesk 5 parts to sheet set manger and there is allot of things I'm not sure of. The title block is the first
View 9 Replies View RelatedWe are having some issues with title block scaling when importing them from the design center. Some people have this problem whilst others have had no problem at all or only in the past and this has since stopped.
Layout Template.jpg
The image above shows an example of the problem. The Layout basically appears 25.4 times larger than the paper itself (the paper is at the bottom left). This would indicate something is wrong with the insertion scale.
The drawing containing the title blocks is in millimeters and the drawings which it is being inserted to are in a mixture of millimeters, inches, or unitless. I have checked the insertion scale settings within options and both Source and Target units are set to millimeters for users that have this problem and users that don't.
I know a quick fix is to just select that block and scale it by 0.03937 (1/25.4).
What’s the typical width indicated by the red line shown in the drawing below on a scaled A1 title block?
100mm or 50mm
Attached is the start of a title block, which I hacked up from a title block I found on this forum.
If you use dd edit to change the text you can only ever type one line of text, the return key does not move you to the next line. How do I change this so I can type in columns.
I have a drawing template that I frequently use and am trying to get the title block appear in every layout. Is this possible? It is only displayed on my first layout.
View 4 Replies View RelatedI want to create title blocks with text fields that are linked to an excel file for easy updating. I want to be able to open the excel file and change the sheet number, date, title, revisions etc. Any title block .dwg file and an excel file that are linked together?
View 1 Replies View RelatedI have done a new Title Block in our drawing templates.
It only works in New drawings if I open an old drawing I must "Copy/paste" the new Title Block into the browser to the left But I want all our old drawings to use the new Title Block.
Is there a way to have the new Title as default on all old drawings?
How can I customize the title block where it says Drawn, Checked and approved?
I want the dates with initials to place automatically. However, I want the date of approval and checked to be 2-5 days after the drawn date. (using Inventor pro. 2012)
I know how to insert title block in a layout tab. i want the title block to be the same block in all the tabs i am using. if i have 10 tabs i would like each layout tab to have the same title block. i will also need properties to where i change the date on the cover sheet, all layout tabs will be changed at the same time.
this also needs to be 1 file and not a base file and xref.
i know this works because i am working in autocad where it is implemented. this was done by an individual before i started at this job.
I am trying to replace the title block of the first sheet of the active drawing via C#. I currently am receiving the following error on the last line of The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)).
Why the code below is throwing this error? I have tried multiple variations of the code below to no avail and I'm sure this is something minor that I am overlooking. The title block definition under Drawing Resources is replaced with no errors, the title block on Sheet 1 is deleted just fine, but I can't seem to add a Title Block back in!
How Documents are defined:
Inventor._DrawingDocument oDoc = getDoc();Inventor.DrawingDocument sourceDoc =(Drawing Document) instance.Documents. OpenWith Options(sPath, options, false); Find, copy, replace: TitleBlockDefinition tBlock = sourceDoc.TitleBlockDefinitions[blockList.SelectedItem.ToString()]; TitleBlockDefinition newBlock = tBlock.CopyTo(oDoc, true); oDoc.Sheets[1].TitleBlock.Delete(); oDoc.Sheets[1].AddTitleBlock(newBlock);
I have created a new title block for my company and i have a revision table on it. I use the tabs to go from different paper spaces and i would like to find a solution to where if i enter information on my first page it will automatically copy exactly what i put to the other tables on the other tabs.
View 4 Replies View Related