I have revived an old project that was started about 2 years ago. I went to attach my title block in paper space and the drawing was itty bitty.
Seemed unusual because in another layout the title block is there with the same page setups etc.
Then I looked at the block units and they were set to mm. Can it be changed? If so how? Or am I completely hooped?
ACA2011
Win7 64
By a mistake i have drawn my drawing in millimeters. Thus when i print it in 1:1 it is to small .
And when i click on my block and go to properties, I can't change the block unit it is grey market. is it possible to change that in centimeters ?
Block unit.JPG
I have lots of block in a file in different places. How to change the base point of that block with out changing the position of that?
View 1 Replies View RelatedI have created a library of dynamic blocks in AutoCad10. When I craeted them I could click on the Grip for a Linear Parameter that was associated with a Stretch Action and the current value would be displayed (Example: The width of a block). I could type in a new value and the block would stretch to that value. Something changed this week when I attempted to use my blocks. When I click on the Grip no dimension is displayed. The command line shows "Specify point location or [Base point/Undo/Exit]". I can drag the grip to change my block but I cannot simply type in a new dimension as before.
View 2 Replies View RelatedIs it possible to change the background color in Block editor from white to black?
View 2 Replies View RelatedI am using Autocad Architecture 2013. When I type in "units" and hit enter, two Chinese characters show up in the command line. If I continue to hit enter, it allows me to change some values but a dialogue box never displays.
View 7 Replies View RelatedI am working on AutoCAD 2014 and every time I receive and open a new file from our collaborators in Italy, the file units "turn into" inches.
This means that I have to go to Drawing Utilities, Change the units to cm, and then have to Scale everything so that the measurements make sense again.
I've gone into OPTIONS and have set CM as thed default measurements, but this problem persists. I know that the office in Italy can't possibly be working in inches, so I'm assuming there's something that's "lost in translation" when it comes to opening the file on my end.
how do I go about determining the drawing units that are being used in a drawing? I want to be able to determine whether the units are set to feet, inches, millimetres, metres etc but can't fathom how to get this info using lisp.
View 2 Replies View RelatedWhat is the correct procedure to set up units in a project. I want to work with meters, ant the metric template is in milimeters. if I change the mm in m, when I make views the callouts are displayed incorrectly.
View 1 Replies View RelatedI just installed autocad architecture 2012. when i opened it to start creating a new drawing/project the unit of measurement was in Millimeters.. i needed the Unit of measurement to be in architectural units, so i used the units command to change it to architectural units. the problem i am having now is that i think the Grid Scale is still in MM. when i tried to draw a line on the grid the line appeared to be tiny. the length of the line was 36'-5". i adjusted the scale to 1/4"=1' but that didnt change anything. in order to see the line that i drew i have to zoom in so much..
How do i adjust the grid scale to be the same as the units?
Using ACAD 2013 64 bits. I am trying to insert a block created in inches (by another company), in a drawing created in meters, but it is not working. This is the initial setup: Block-drawing's units are set to inches, type Architectural. My drawing's units are set to meters, type decimal. So far so good, I guess. Then, I proceed to open my drawing, execute the insert block command and select the Block-drawing. Once selected, I can see in the dialog box . Block unit clearly reading inches and the correct scale factor of 0.0254. However, when click OK, the drawing is huge. I check it's properties and the block's geometry is correctly set at an insertion scale of 1, 1, 1; but, in Misc, the block unit is now "meters" and the unit factor is "1"! This means that one inch equals one meter. This does not happen when I create the blocks; in those cases it works as it should.
View 4 Replies View RelatedI am using Autocad Architecture 2013 and I am having an issue with Property Set Data. Whenever I create door or window tags, the Property Set Data is in the wrong units.
I have two separate projects, on in Imperial units and another in Metric. When I add a new door/window tag, the units for that particular door or window are incorrect. The drawings are setup in the proper units, the dimensions are as well. But when I create these tags and subsequently the schedules for them, they are in the wrong units. The tags/schedules for the metric project are in feet and inches and the tags/schedules for the imperial project are in millimeters.
Reviewing the ACA 2011 Curriculum for next year, I notice that Units 1 and 2 .dwg files are missing for the first two units. Is there a link to download the missing files?
View 3 Replies View RelatedI have a block containing several parts blocks. When I explode the main block all of the parts are exploded back to lines. I have used both "explode" and "xplode" and have the same results. How can I explode so I have my components as blocks?
View 6 Replies View Relatedis there a way to change units, lets say i am making a wall with a unit of meters and suddenly i want to make a sofa with a unit of inches or a bed with a unit of feet.. is there a way to do this?
even if i change the units of the FORMAT tab, it stays the same...
In my autocad i draw in mm, how can i draw in m?
View 4 Replies View RelatedI have been trying to draw in mm, i.e, when i draw a line 1000 i want it to be 1000 mm. but currently when i do that i'm getting a line way too long, cant even zoom out to see it fully. i can only draw shorter lines (ex. 30) to be able to see it fully.
View 2 Replies View RelatedI got a unitless model! So, I changed it to Inches (Format/ Units). However, it does sound like nothing has been changed!
View 9 Replies View RelatedI created an idw and annotated all the dimensions in default to inches. Is it possible to switch all of the units from inches to mm at one time? If so, how?
View 2 Replies View RelatedI'm using sendcommand to draw various shapes in autocad.
the problem is my application (wpf) uses pixel units while autocad uses inches by default.
how can I change autocad units to pixel programmatically?
My drawing template title block has a section for estimated weight. This value and overall size is used to determine shipping methods of our products. This value is pulled from the Type->Physical Properties-Model and Property->MASS. There is no option to turn off units. When our clients look at the drawing, they often get confused with lbmass unit. example; When someone asks what the weight of the product is, we dont say it is 1300 pound mass, we say it is 1300 pounds. I have looked around all different forums and found no complete answer or solution to this.
The only thing closest to a solution that I found on this forum is to create a rule that creates a custom iproperty within the model. [URL]........
You then have to create a text field in your title block that populates from that custom iproperty but can only be done when a base view is inserted from a model that has the custom iproperty rule applied.
From what I have tried, you can create a .ipt template to save you from creating that rule to create a custom iproperty each and every time, but to populate the title block field, a user needs to create that text field and draw from that custom iproperty once the base view is set on the drawing.
I also found a way to incorporate mass without units but the information will be put into the parts list. So instead of the weight being "automatically" entered into the title block after inserting base view, I could create a parts list for every drawing. (Not a good solution) [URL].........
One last solution that I found, is there used to be a tool called iProperty Collection[URL]....... that gave users the ability to customize some Inventor functions. One being the ability to change the unit displayed for MASS. I haven't tried using this tool because the last update off the website stated in 2009; says the software is not compatible with Inventor 2009 64bit, since I am using Inventor 2012 64bit, I think this is a dead end.
I have a query on the units for Autocad, every time i start Autocad up it defaults to inches, i have to change the units manually to mm using in units. is there a way to set this that i don't have to keep doing this?
View 2 Replies View RelatedI have some drawings that are drawn in millimeters. I need to add to the drawings but when I type 36 I get a line 36" long. I need to change autocad so that when I type 36 it draws a line that is 36mm.
View 9 Replies View RelatedI am drawing a plan view of building that is 11 feet by 36 feet. I thought my map units were in feet but when I draw in the linear dimensions, it reads 11 inches x 3 feet. How do I change this?
View 8 Replies View Relatedhow can I change Von mises units, MPa ( Default) to another one?
View 3 Replies View RelatedI'm having an issue with dimensions changing from when I save the drawing to when I reopen it.
I'm using AutoCAD Mechanical 2009, exclusively in 2D. I save drawings in AutoCAD 2000/LT 2000 Drawing format to maintain backwards compatibility with our legacy documents which are still in regular use.
The exact process is:
1. Create dimension in existing drawing.
2. Set units of dimension. Typically this is fractional.
3. Save and close drawing.
4. Reopen drawing, and all of the dimensions units are set to decimal to the fourth decimal point.
If I interact with the dimension in any way, it will return to its set unit. For example, if I double click on it to bring up the Power Dimensioning window and just click Okay without altering anything, it will change back to its set unit. Likewise, if I move the dimension itself it will return to its set unit as well.
So far my solution has been to simply select the entire drawing at once, then move it X units one way, then X units back. The move back and forth will return all the dimensions to their set units.
Obviously this is not ideal, especially when sending drawings to co-workers who are unaware of the issue or even using different versions of AutoCAD.
ok here it goes, when i want to use the units menu to change from inches to mm , or use the modify menu i get the following error(s)
'_units Unknown command "UNITS". Press F1 for help.
and same thing happens with properties.
Standard in autocad stands in the plot layout plot scale inch en mm.
xxxx mm =
x unit
I want to put meters into it. Is this possible and how to do this?
I am after a rule to change the unit type of all .ipts from cm to mm.
This has to go down to all levels in hierarchy but only change .ipt files
Is it possible to change the units of measure in the iProperties from lbmass to tons for instance? I deal with very large, heavy concrete objects and tons is the way we show mass. Also use cubic yards instead of cubic inches.
View 7 Replies View RelatedI am creating a custom table in a .idw through VB. I was looking for the code that would tell it to make a column have units formattng. For example, instead of my thickness to be 0.5, I want it to show 1/2 in. I know you can do this manually in the table editor, but I cannot find any bits of code that will do it in VB automatically.
View 1 Replies View Related