I am drawing a plan view of building that is 11 feet by 36 feet. I thought my map units were in feet but when I draw in the linear dimensions, it reads 11 inches x 3 feet. How do I change this?
View 8 RepliesI received a .dwg file from S. Korea with dimensions and units all in the metric mm and I need the units to be in feet and inches. Is there a command to switch dimensions and units to imperial feet and inches?
Rather than changing units in command UNITS Inches and Architectural, and SCALE 25.4, is there any other way to switch metric to imperial systems. Scaling somewhat does the trick but, provided dimensions remain in mm.
I can't find the option that changes the scale from 1/100 to 1/16" to 1'-0" or how to have the scale show up on a drawing. I've gone into options and turned on the scale visibility but get squat on both.
Also where can I find a list of the title block text options ie. ,
When drawing using imperial units in Revit, it of course interprets values you input as feet until you press " to let it know you mean inches. As I am constantly going between Revit and AutoCAD, which does the opposite, I keep missing the " out of habit and wasting time repeating everything. My question is, is there a way to change the input from feet to inches so I can move more seamlessly between the two programs?
View 2 Replies View RelatedOut of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies View Relatedok here it goes, when i want to use the units menu to change from inches to mm , or use the modify menu i get the following error(s)
'_units Unknown command "UNITS". Press F1 for help.
and same thing happens with properties.
I have just reloaded CS5 onto my laptop with Windows 7 and I can't change the unit preference to inches. Every time I try to select it, it immediately reverts back to points.
View 2 Replies View RelatedHow do you change the measurement units from cc to inches in Illustrator 5? Changing it in preferences does not do anything.
View 2 Replies View RelatedEvery time I open Xara I have to change the default settings under "Utilities", "Options", "Units" from inches to pixels. There are other default settings I'd like to change as well, but my question is how do I change those settings to default so that when I open Xara, I don't have to go reset them? This is a PITA! I have searched through the help files and don't see any info on changing the standard default settings!
View 7 Replies View RelatedWhen I try and dimesion my drawing it brings up 8' as 8" on the dimesion line, and when I dimension something like 1'-10" it brings up 1'-10''' on the dimesion line. Once i click the dimesnion to attach it to the drawing I click on the measurement tool and it bring up the correct measurement. Is there a way to fix this?
View 2 Replies View RelatedI have a very simple surface. All of the elevations defining it, are set in feet. When I click on the surface it tells me my max and min elevations are in feet matching the points that I have defining the surface.
Here is the kicker, when I run a distance it is measuring the Z distance in inches and not feet. As you can see by the attached image the distance is 95' but the elevation change is 1 3/8". The actual points defining the surface are 1.28' difference. If I were to do a spot elevation on the surface, it would give me the correct elevation in feet. I am guessing that this is some sort of variable that I have missed, but damned if I can find it.
I have a DWG from a land surveyer, how is the drawing converted into feet and inches so it can be used as an architectural site plan?
View 3 Replies View RelatedWhen I had ACAD 2008 I used to copy objects and type 10' or 4' for the distance3 rather than 120 or 48. For some reason in ACAD 2013, it does not accept my distance in feet anymore. Do I suddenly have a setting off in ACAD 2013? I used to be able to work much more quickly and I work with large distances when copying.
View 3 Replies View RelatedI’m a draftsman and I have a calculator that has feet and inches which of course makes things easy assisting in draft. I was wondering for those who do not have such calculator – I was considering creating a simple iphone app that does just that – add/ subtract as well as conversion from metric to imperial and vise versa. Just gauging to see if there is interest.
View 9 Replies View RelatedAny number keypad available with feet and inches keys?? I unfortunately cannot download any software of any kind at work and cannot use programmable keyboards. (I can't even setup my extra buttons on my USB mouse)
I've found them tab and escape buttons which I would also like. But entering dimensions most of the day, this would be useful!
We are having trouble setting up a drawing in Feet & inches. Up until now all we have been drawing in metric.
View 5 Replies View RelatedI have a drawing in metric but I want the results in feet and inches, do I draw it in metric and have Autocad spit out a feet and Inches drawing, is that even possible. Or do I do the conversions up front and explain to the client that he will get his metric drawing back in feet and inches.
Second part, if the drawing is in metric do I open the Autocad Civil 3D metric icon or does it matter. Where I can read up on why there is a metic and imperial Autocad icon?
When I use the distance command the answer displays in inches; I prefer feet of course. How do I navigate to the menu that changes this?
View 4 Replies View RelatedI have a drawing that has a scale of 1:100. I need to convert the drawing into feet and inches for remodeling use. How do I determine what the conversion factor is?
View 4 Replies View RelatedI'd like to show feet/inches with arch units even when i have a whole number measurement. right now the dim for 16' shows as 16' only. i want it to show as 16'-0"
View 3 Replies View RelatedHow could i know if i'm using meters, and not inches, feet or millimeters? and how to set autocad to use meters not inches, feet, nor millimeters.
View 9 Replies View RelatedIs there a way that I can add multiple polylines in feet and inches? I downloaded some lisp routines, but they are not in feet and inches.
View 2 Replies View RelatedI've got the Pipe Table style just as I need it except for one thing. I have all circular pipes and I would like the "size" column to display in inches rather than in feet. In the past I was able to multiply this number by 12 in the style composer but that doesn't seem to work anymore.
View 2 Replies View RelatedIs there a way to get the dual unit option to read in both feet and inches....for instance 32.75 to read 2'-8 3/4" instead of 2.729 ft?
View 3 Replies View RelatedI need to make two banners one is 10ftX14ft and the other is 6ftX8ft. When I create a new doccument there is no option for feet. I need to convert Feet into Inches or Pixels, how can I do that, So illustrator will except the size?
View 2 Replies View RelatedIn Civil 3D 2013, when I execute the _area command, i get results in square feet as opposed to acres. Under the ambient settings, the area unit is set to acre. how to get C3D to display my area in acres? I just want it to list the area, not label it.
Also, is there a way to get it to display the area in BOTH acres and square feet?
This is probably simple, but I cannot find how do display dimensions on both feet and inches.
Currently my dimensions display as a decimal (ie 12.5' ). I would like both feet and inches (ie 12' 6" )
Where do I change this, turn on option?
I have this problem with units. I am using 2012 Autocad drafting. I want to work with millimeters, for instance usually when I type 1000, that is usually refereed as 1 meter. Now in the new model space when I type 1000 the line is so long, I even have to press regenerate so that I can see the line. I checked the units, they are set to millimeters, I also checked from options - user preferences they are also set to millimeters.
When for instance I will open an older file that I worked on in autocad 2010, in autocad 2012, it will work fine, when I will write 1000, it will actually come up as one meter. The settings in units and options - user preferences are the same.
I also copied a table from the 2010 file to the new one, and the chair comes up very big in the screen, so again I use regenerate to zoom out.
Also every time I open a new file, I have to go to units and change it from Inches to millimeters. Is there a way to do it once, so that you don't have to do it every time you open a new file in autocad? I know you can customize your workspace, and I have, but that doesn't seam to do it.
I am working on AutoCAD 2014 and every time I receive and open a new file from our collaborators in Italy, the file units "turn into" inches.
This means that I have to go to Drawing Utilities, Change the units to cm, and then have to Scale everything so that the measurements make sense again.
I've gone into OPTIONS and have set CM as thed default measurements, but this problem persists. I know that the office in Italy can't possibly be working in inches, so I'm assuming there's something that's "lost in translation" when it comes to opening the file on my end.
When I want to edit a solid part in Inventor 2012, I click the "Edit Form" button which automatically launches Fusion. Units are defaulted to cm every time (I don't understand why it can't autodetect units) and the first thing I do is switch them to inches (english). I edit my part then return to Inventor. The part has been resized (smaller by a factor of 2.54) and moved off my original origin. I cannot figure out how to get around this HUGE problem. This has made Fusion useless to me and has drastically reduced the functionality of my ablility to solid edit.
If Fusion is intigrated into Inventor, why does it behave as a totally different product (reversed scroll wheel direction, different units, no refrencing between Inventor features and Fusion, etc.)? It's as if the Fusion programing team and the Inventor programming team met for just long enough to put the Fusion button in Inventor and nothing more.
How I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1