I've got the Pipe Table style just as I need it except for one thing. I have all circular pipes and I would like the "size" column to display in inches rather than in feet. In the past I was able to multiply this number by 12 in the style composer but that doesn't seem to work anymore.
View 2 RepliesI have a very simple surface. All of the elevations defining it, are set in feet. When I click on the surface it tells me my max and min elevations are in feet matching the points that I have defining the surface.
Here is the kicker, when I run a distance it is measuring the Z distance in inches and not feet. As you can see by the attached image the distance is 95' but the elevation change is 1 3/8". The actual points defining the surface are 1.28' difference. If I were to do a spot elevation on the surface, it would give me the correct elevation in feet. I am guessing that this is some sort of variable that I have missed, but damned if I can find it.
I have a drawing in metric but I want the results in feet and inches, do I draw it in metric and have Autocad spit out a feet and Inches drawing, is that even possible. Or do I do the conversions up front and explain to the client that he will get his metric drawing back in feet and inches.
Second part, if the drawing is in metric do I open the Autocad Civil 3D metric icon or does it matter. Where I can read up on why there is a metic and imperial Autocad icon?
When I use the distance command the answer displays in inches; I prefer feet of course. How do I navigate to the menu that changes this?
View 4 Replies View RelatedI'd like to show feet/inches with arch units even when i have a whole number measurement. right now the dim for 16' shows as 16' only. i want it to show as 16'-0"
View 3 Replies View RelatedOut of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
View 5 Replies View RelatedHow I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
Is there a way to make AutoCAD2012 display the area of a closed Polyline as Feet- Inch(ex 22'-4") rather than the feet as a decimal (ex feet=22.3333333) as it does when the units are set to Architectural or Engineering?
View 1 Replies View RelatedI am trying to delete a few rows in both my pipe table and my structure table but the 'remove items' button doesn't work.
View 2 Replies View RelatedWhen I try and dimesion my drawing it brings up 8' as 8" on the dimesion line, and when I dimension something like 1'-10" it brings up 1'-10''' on the dimesion line. Once i click the dimesnion to attach it to the drawing I click on the measurement tool and it bring up the correct measurement. Is there a way to fix this?
View 2 Replies View RelatedI have a DWG from a land surveyer, how is the drawing converted into feet and inches so it can be used as an architectural site plan?
View 3 Replies View RelatedI am drawing a plan view of building that is 11 feet by 36 feet. I thought my map units were in feet but when I draw in the linear dimensions, it reads 11 inches x 3 feet. How do I change this?
View 8 Replies View RelatedWhen I had ACAD 2008 I used to copy objects and type 10' or 4' for the distance3 rather than 120 or 48. For some reason in ACAD 2013, it does not accept my distance in feet anymore. Do I suddenly have a setting off in ACAD 2013? I used to be able to work much more quickly and I work with large distances when copying.
View 3 Replies View RelatedI’m a draftsman and I have a calculator that has feet and inches which of course makes things easy assisting in draft. I was wondering for those who do not have such calculator – I was considering creating a simple iphone app that does just that – add/ subtract as well as conversion from metric to imperial and vise versa. Just gauging to see if there is interest.
View 9 Replies View RelatedAny number keypad available with feet and inches keys?? I unfortunately cannot download any software of any kind at work and cannot use programmable keyboards. (I can't even setup my extra buttons on my USB mouse)
I've found them tab and escape buttons which I would also like. But entering dimensions most of the day, this would be useful!
We are having trouble setting up a drawing in Feet & inches. Up until now all we have been drawing in metric.
View 5 Replies View RelatedI can't find the option that changes the scale from 1/100 to 1/16" to 1'-0" or how to have the scale show up on a drawing. I've gone into options and turned on the scale visibility but get squat on both.
Also where can I find a list of the title block text options ie. ,
I have a drawing that has a scale of 1:100. I need to convert the drawing into feet and inches for remodeling use. How do I determine what the conversion factor is?
View 4 Replies View RelatedHow could i know if i'm using meters, and not inches, feet or millimeters? and how to set autocad to use meters not inches, feet, nor millimeters.
View 9 Replies View RelatedIs there a way that I can add multiple polylines in feet and inches? I downloaded some lisp routines, but they are not in feet and inches.
View 2 Replies View RelatedI received a .dwg file from S. Korea with dimensions and units all in the metric mm and I need the units to be in feet and inches. Is there a command to switch dimensions and units to imperial feet and inches?
Rather than changing units in command UNITS Inches and Architectural, and SCALE 25.4, is there any other way to switch metric to imperial systems. Scaling somewhat does the trick but, provided dimensions remain in mm.
I have a drawing set up to be Survey Feet and everytime i export it to autocad using the export tool it converts it to international feet.
Civil 3D 2012 all sp's
Is there a way to get the dual unit option to read in both feet and inches....for instance 32.75 to read 2'-8 3/4" instead of 2.729 ft?
View 3 Replies View RelatedWhen drawing using imperial units in Revit, it of course interprets values you input as feet until you press " to let it know you mean inches. As I am constantly going between Revit and AutoCAD, which does the opposite, I keep missing the " out of habit and wasting time repeating everything. My question is, is there a way to change the input from feet to inches so I can move more seamlessly between the two programs?
View 2 Replies View RelatedI need to make two banners one is 10ftX14ft and the other is 6ftX8ft. When I create a new doccument there is no option for feet. I need to convert Feet into Inches or Pixels, how can I do that, So illustrator will except the size?
View 2 Replies View RelatedThis is probably simple, but I cannot find how do display dimensions on both feet and inches.
Currently my dimensions display as a decimal (ie 12.5' ). I would like both feet and inches (ie 12' 6" )
Where do I change this, turn on option?
i've got proposed stormwater pipes crossing existing utility pipes. my proposed stormwater pipes run parallel to but offset from my road centerline alignment. i want to show the existing utility pipe as an oval where it crosses my stormwater pipe. i can get the utility to show up in the profile at the centerline alignment of my road but not at the actual point where the pipes cross. is there a way to show this?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
In profile I would like to show the 'Inside Pipe Walls' line on top of the 'Pipe Hatch' is this possible, search some threads haven't found a solution.
View 5 Replies View RelatedI created a project from scratch. I created some pipe labels showing our companies arrow block in label the and set it to Grade Check. It worked great. It point in the downward slope and at the end of each pipe. No issue. I copied the label style to an existing project I inherited and did not set up. In that project, certain variables for pipe and structure labels display backwards or mirror image. I can't figure it out. I copy those same structure and pipe labels to a new project and they display fine.
Also when I create a profile view the numbers for my vertical elevations in the profile are backwards (but plot fine). The labels mentioned above do not plot fine. I have also copied items from another project and they came in mirror image including the text.
Civil 3D 2013
Windows 8
Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
32. GB
64-bit Oepration System, x64-based processor
No Pen or Touch Input
I am using C3D 2012 sp2.
I have a autocad file with MEP pipe objects (piping layout inside a building). If I start a new drawing using our company (dwt) template then xref in the cad file with the MEP objects they do not display. If I start a new drawing using one of autocads default (dwt) templates then xref in the MEP objects they display fine. My question is somewhere in our company template is a setting for MEP objects to be displayed .
I can create labels to display stationing in a profile, but is there a way to display the coordinates in the profile instead? When I need to move my pipes I am using the station I get from the profile label and then use grip move. If I could get the N, E, I could just type it in on the Vista table.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)