Is there a way to make AutoCAD2012 display the area of a closed Polyline as Feet- Inch(ex 22'-4") rather than the feet as a decimal (ex feet=22.3333333) as it does when the units are set to Architectural or Engineering?
View 1 RepliesI was just wondering why when I try and calculate an area using a polyine, I am getting a readout of 1.80401967E+07, when I have it set to give me the calculation in square feet? It is an area of approx. 246 Acres.....is this because the area is so large? I am not sure what the "E" stands for or the "+07" at the end....
View 6 Replies View RelatedI have a drawing set up to be Survey Feet and everytime i export it to autocad using the export tool it converts it to international feet.
Civil 3D 2012 all sp's
I have have to use a program to do these hydraulic counts that must be done in decimal feet. So, what I want to be able to do is when I make a dimension that is 12'-8" for example, that it read 12.667.
View 6 Replies View RelatedMy data is in decimal format and
In metric I am geting the feet interval of contours
How to change the feet to decimal system
How I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
i recently upgraded from 2007 to 2013. when i select properties for an object, such as a closed ploy line, the area is displayed in square inches. i can not seem to figure out how to change it to feet
View 3 Replies View RelatedIn Civil 3D 2013, when I execute the _area command, i get results in square feet as opposed to acres. Under the ambient settings, the area unit is set to acre. how to get C3D to display my area in acres? I just want it to list the area, not label it.
Also, is there a way to get it to display the area in BOTH acres and square feet?
Is there a way to get the Area option of the rectangle command to work in square feet rather than square inches?
View 9 Replies View RelatedI've got the Pipe Table style just as I need it except for one thing. I have all circular pipes and I would like the "size" column to display in inches rather than in feet. In the past I was able to multiply this number by 12 in the style composer but that doesn't seem to work anymore.
View 2 Replies View RelatedPresently the "AREA" of a closed polyline is in "sq-in" first, THEN "sq ft".
For everything I do, and likely others, I need sq ft - without having to waste time and roll my cursor over the results.
Is there ANY way to change this default to have sq ft FIRST!??
I was wondering if there is a settings for the displayed values in a polyline's properties. Such as area. Normally it will display square feet but I would like for it to also display acres. I know it a simple conversion, but over the course of a year or more it could save me alot of time.
View 2 Replies View RelatedI have linked my drawing to a database with text inside a closed polyline. Is there a way to have the area of the closed polyline stored in the database as a live area.
View 8 Replies View RelatedI've read 2013 is going to include line labeling capabilities by selecting 2 points rather than selecting linework. Is there going to be a way to label an area without creating a closed polyline or parcel, where it works the way a hatch works. So if I selecting in the middle of multiple individual intersecting lines, it labels the area.
View 9 Replies View RelatedLSP file i downlaoded from web.it is to use for Area with (m2) and room name. by click polyline.
i want to modify it to use without adding Room Name, just insert area to the drawing.
(defun drtxt (/ rn tx ls vl lt ht lb hb nr pt)
(setq tx (strcat "Area: "
(rtos (/ (getvar "area") 1000000) 2 2)
" m2"
)
rn (getstring "
Room Name: ")
[code]....
When I try and dimesion my drawing it brings up 8' as 8" on the dimesion line, and when I dimension something like 1'-10" it brings up 1'-10''' on the dimesion line. Once i click the dimesnion to attach it to the drawing I click on the measurement tool and it bring up the correct measurement. Is there a way to fix this?
View 2 Replies View RelatedI have browsed one file in meters from Pythagoras to dwg. When I opened it with Civil 3D the drawing units become feet. Where is the problem and how can I convert the whole drawing to meters?
View 5 Replies View RelatedI have a very simple surface. All of the elevations defining it, are set in feet. When I click on the surface it tells me my max and min elevations are in feet matching the points that I have defining the surface.
Here is the kicker, when I run a distance it is measuring the Z distance in inches and not feet. As you can see by the attached image the distance is 95' but the elevation change is 1 3/8". The actual points defining the surface are 1.28' difference. If I were to do a spot elevation on the surface, it would give me the correct elevation in feet. I am guessing that this is some sort of variable that I have missed, but damned if I can find it.
I just missing something or is there no way to get frame generator parts to list their lengths in feet?
I have authored some structurial parts and everything was done in feet, when I insert them directly from the Content Center, everything work like I want it to, but when I use frame generator they lengths are always in inches.
I know I can change it in the BOM but I'm trying to make it more consistant for everybody.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
I am trying to get the feet mark (') on the dimension, right now I have 66.71 and I want 66.71'.
View 5 Replies View RelatedI have a DWG from a land surveyer, how is the drawing converted into feet and inches so it can be used as an architectural site plan?
View 3 Replies View RelatedI am drawing a plan view of building that is 11 feet by 36 feet. I thought my map units were in feet but when I draw in the linear dimensions, it reads 11 inches x 3 feet. How do I change this?
View 8 Replies View RelatedWhen I had ACAD 2008 I used to copy objects and type 10' or 4' for the distance3 rather than 120 or 48. For some reason in ACAD 2013, it does not accept my distance in feet anymore. Do I suddenly have a setting off in ACAD 2013? I used to be able to work much more quickly and I work with large distances when copying.
View 3 Replies View RelatedI’m a draftsman and I have a calculator that has feet and inches which of course makes things easy assisting in draft. I was wondering for those who do not have such calculator – I was considering creating a simple iphone app that does just that – add/ subtract as well as conversion from metric to imperial and vise versa. Just gauging to see if there is interest.
View 9 Replies View RelatedI import a text file. I look at the coordinate list in the toolspace under the survey tab and the coordinates listed are correct. but the nodes in the drawing are 4 feet off.
View 5 Replies View RelatedAny number keypad available with feet and inches keys?? I unfortunately cannot download any software of any kind at work and cannot use programmable keyboards. (I can't even setup my extra buttons on my USB mouse)
I've found them tab and escape buttons which I would also like. But entering dimensions most of the day, this would be useful!
We are having trouble setting up a drawing in Feet & inches. Up until now all we have been drawing in metric.
View 5 Replies View RelatedI have a drawing in metric but I want the results in feet and inches, do I draw it in metric and have Autocad spit out a feet and Inches drawing, is that even possible. Or do I do the conversions up front and explain to the client that he will get his metric drawing back in feet and inches.
Second part, if the drawing is in metric do I open the Autocad Civil 3D metric icon or does it matter. Where I can read up on why there is a metic and imperial Autocad icon?
I would like to change the conversion factor of meters to feet to a more accurate value rather that 0.3048. In my place we use the meter to feet conversion with 3.2808333. It makes a lot difference when the decimals does not carry up to 7 decimal place.
View 3 Replies View RelatedI have a set of dimensions in meters and I am trying to automatically convert to feet. So I am going to the Dimension Style that rules the numbers that I want to convert and after clicking in Modify button>Primary Units I go to Linear dimensions group and change the Unit format from decimal to Architectural and 100 m turns to 8' - 4" not to 328.08'.
View 3 Replies View RelatedWhen I use the distance command the answer displays in inches; I prefer feet of course. How do I navigate to the menu that changes this?
View 4 Replies View Related