I was just wondering why when I try and calculate an area using a polyine, I am getting a readout of 1.80401967E+07, when I have it set to give me the calculation in square feet? It is an area of approx. 246 Acres.....is this because the area is so large? I am not sure what the "E" stands for or the "+07" at the end....
View 6 RepliesIn Civil 3D 2013, when I execute the _area command, i get results in square feet as opposed to acres. Under the ambient settings, the area unit is set to acre. how to get C3D to display my area in acres? I just want it to list the area, not label it.
Also, is there a way to get it to display the area in BOTH acres and square feet?
Is there a way to make AutoCAD2012 display the area of a closed Polyline as Feet- Inch(ex 22'-4") rather than the feet as a decimal (ex feet=22.3333333) as it does when the units are set to Architectural or Engineering?
View 1 Replies View RelatedHow I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
how the area calculation works for finding the square footage of a dwg.
I can easily get a rough estimate of square footage on L X W....but when i use the area measuring tool, i get total inches and a total sq foot estimate of 1.7xxxxx which i don't understand.
If I want to calculate the square mm of an area, how do I do so? I know this should be really simple but I can't get the results I want. Let's say I have a rectangle (2D) and I draw somew circles and polylines within it that are 'cut out' from the rectangle....how does one calcualte the remaining square mm?
View 9 Replies View RelatedIs there a way to get the Area option of the rectangle command to work in square feet rather than square inches?
View 9 Replies View RelatedIs there a way to calculate a (closed) 3D polyline area ?
View 8 Replies View RelatedHow to changes the settings for the "Square Area" in mapcheck's closure summary. When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area". Why are these both there? It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I am highlighting an area and at the last point where I press eneter expecting an area calculation, I get this message "specify next point or [A/L/U]; I don't want that I want the area
View 1 Replies View RelatedI have an acad document connected to some .shp files, which contain polygonal shapes with some meta-tags.
I want to achieve the following: draw a polygonal shape and select all the tangent areas (I already know how to do so)take a property of those areas and calculate an area-proportional [or: area weighted] average value (proportional to the partial area defined by the drawn polygonal shape). I tried to achieve this by splitting the objects and merging them again with defined splitting (area proportional) and merging (average) options. The problem is: splitting & merging doesn't work until I disconnect the data files (checking the objects out doesn't work) and even then I can't split the areas. And, more important: This doesn't create a weighted average and I don't even want to manipulate the objects! I just want to get one value out of all these steps.
I appended a screenshot of my file. E.g. I want to take the value 923.2 and multiply it with the corresponding area percentage it represents in the drawn shape. So the calculation would look something like 0.02*923.2 + 0.2*926 + 0.12*945,9 [...] until all the 100% are covered and I get one single representative value.
I use AutoCAD Civil 3D 2012 on an Intel Core i7, 12GB RAM, 64bit Win 7 Pro SP 1 PC.
How to calculate the AREA of cut and fill analogous to the volume of cut and fill between surfaces, but instead only between the alignment and the road profile in the prolfile view. From what I've read of similar posts a few people have had the same question but have been instructed how to do it with volumes as opposed to area. Also how to insert a table of cut and fill area analogous to the one you can inset from the volumes dashboard.
View 5 Replies View RelatedI’m a draftsman and I have a calculator that has feet and inches which of course makes things easy assisting in draft. I was wondering for those who do not have such calculator – I was considering creating a simple iphone app that does just that – add/ subtract as well as conversion from metric to imperial and vise versa. Just gauging to see if there is interest.
View 9 Replies View RelatedI have a drawing set up to be Survey Feet and everytime i export it to autocad using the export tool it converts it to international feet.
Civil 3D 2012 all sp's
I have an irregular shaped polyline in civil 3d that needs to be 31.5 acres. It is currently 32.8 acres. Without manually rescaling this polyline over and over again in order to achieve a polyline that represents 31.5 acres, can Civil 3D automatically draw the polyline to represent 31.5 acres for me?
View 9 Replies View RelatedI've read 2013 is going to include line labeling capabilities by selecting 2 points rather than selecting linework. Is there going to be a way to label an area without creating a closed polyline or parcel, where it works the way a hatch works. So if I selecting in the middle of multiple individual intersecting lines, it labels the area.
View 9 Replies View RelatedI need to calculate square footage quickly. I am currently polylining everything. Here is what I need to do quicker:
Calculate square feet of each room with these requirements:
- When meeting a hallway to the outside face of the wall
- when next to an adjoining space, to the midpoint of the wall
- When against an outer wall, going to the face of the wall.
I don't use the area calculation tool that much. I was just working out a large area for concrete. I use TOOLS - INQUIRY - AREA. Thats all fine and it gives me the area, for instance, to keep it simple 4900 x 9000 = 44.10m² AutoCad displays it as 44100000. I know it's not a major problem, but is there anyway I can get it to display as 44.10 or at least lose all the zeros.
View 9 Replies View Relatedi recently upgraded from 2007 to 2013. when i select properties for an object, such as a closed ploy line, the area is displayed in square inches. i can not seem to figure out how to change it to feet
View 3 Replies View RelatedHow to get multiple objects area easily. i am using auto cad 2009.
View 2 Replies View RelatedI am trying to calculate the area of our parts. I was trying to do the math my self but I kept getting a lower area than IV. I haver attached a picture of what I get from IV. I have listed my calculations of the angle iron below:
I am using IV Pro 2011 Educational SP1
i7 2600
8GB ram
1Gb GTX 560
Cart 72 lbs 4006 sq in
All calculatoins are in ^2
(4) 2x2x1/8x48=92.928, 371.712
(4)2x2x1/8x33=63.888, 255.552
(4)2x2x1/8x29=56.144, 224.576
(2)2x2x1/8x32.669=31.623592, 252.988736
(4)2x1/8x2=32.912
Total = 277.495592, 1137.740736
We are collaborating in Revit. While working in a local file, everything seems to be moving along well. After a little while, if we try to save and/or synchronize with the central file, we get the error message; "square feet per foot." We then get another warning that says the file was not saved. We are unable to save of synchronize. The work-around we have come up with is to save as a new local file. This works for some time... saving and synchronizing without problem - but only for a while.
View 5 Replies View Relatedi've got a lisp-routine that calulates multiple area's and put the sum in text in the drawing on the place i select.
the sum has to be devided with 1000000 so that it is in m2.
the lisp-routie i use is:
(defun c:ca(/ pt ent txthgt)
;;; bepalen van de teksthoogte indien current style height = 0
(setq txthgt (cdr (assoc 40 (tblsearch "STYLE" (getvar "TEXTSTYLE")))))
[Code]......
How to create a dome using just the surface area?
View 1 Replies View RelatedI find conflict area between list command for hatch and calculation.
when do you make calculation list of plines 2381.399
when do you make calculation list of hatch 2545.948
i created new polygon´s SDF (ACAD Civil,Map2011). And created new feature from geometry (from 2 closed plines - island). See on attached picture. If polygons are more complex =erroneous result from calculation ("Round ( Area2D ( Geometrie ), 0 ) "). It means ACAD calculate sum 2 areas together, but It should dedust island from main polygon.
View 3 Replies View RelatedHow to Calcuate the area of a layer, through .NET API ?
View 9 Replies View RelatedI have a drawing which contains about 100 "areas". These areas are closed polylines. I would like to get a total area of all these polylines.
I have tried using AutoCAD 2002's AREA command, but I am only able to select one item at a time, (AREA, Add, Object). This is fine for calculating a few areas. It gives me a running total of each item that I select.
Using the LIST command works OK for a few items, but you still have to wade through all the other information to get the area info for each item.
Is there a way to select crossing ALL the areas that I have, and have it return a total?
How do you calculate paint area?
We do a lot of chutes (for mining). They need to be painted on the outside only. They also need to be lined with rubber sheet on the inside. The area given in the physical tab in iProperties is the total area.
The area of the edges of the plates are small enough that we can ignore them, but is there a way to calculate half the model's area and get that result in the drawing in a text note?
We've only recently switched over to Inventor (used to be on Solidworks, where we had the same problem).
I have a cast aluminum part I need to calculate the surface area for our plating process. I have done a simple area, its not right (.015ft^2). I have derived it as a surface but can't get a volume calculation.
View 9 Replies View RelatedI have contoured an irregularly shaped site that is required to be covered completely by a liner. Is it possible in autocad 2002 to get the area of the surface i have created?
View 1 Replies View Related