AutoCAD Civil 3D :: Highlight And Get Area Calculation On Pressing Enter

Mar 1, 2012

I am highlighting an area and at the last point where I press eneter expecting an area calculation, I get this message "specify next point or [A/L/U]; I don't want that I want the area

View 1 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Calculate Area Using Polyline - Calculation Not In Square Feet?

Dec 16, 2013

I was just wondering why when I try and calculate an area using a polyine, I am getting a readout of 1.80401967E+07, when I have it set to give me the calculation in square feet? It is an area of approx. 246 Acres.....is this because the area is so large? I am not sure what the "E" stands for or the "+07" at the end....

View 6 Replies View Related

Photoshop :: Cannot Open Bridge After Pressing Enter

Oct 31, 2012

after opening mini bridge cannot open bridge after pressing enter?

View 3 Replies View Related

Photoshop :: When Pressing Enter / Return To Commit marquee Selection - Feather Box Turns White For Input?

Sep 17, 2012

When pressing Enter/Return to commit a marquee selection the Feather box turns white for input (and I'm not trying to change the feather values)!? 

Pressing Enter/Return should commit the selection but it doesn't why? I have not changed any short-cut preferences in PS CS6.
 
When I use the Marquee or Lasso tool and make a selection and I'm happy with the selection, I press the Enter (PC)/Return(Mac) and the the "marching ants" should disappear..this has always worked until today? Now, when I press the Enter key, the Feather box (next to the Anti-alias) on the upper left corner goes from grey to white and wants me to change the value?

View 1 Replies View Related

AutoCad :: How To Use Area Calculation Tool

Apr 29, 2013

I don't use the area calculation tool that much. I was just working out a large area for concrete. I use TOOLS - INQUIRY - AREA. Thats all fine and it gives me the area, for instance, to keep it simple 4900 x 9000 = 44.10m² AutoCad displays it as 44100000. I know it's not a major problem, but is there anyway I can get it to display as 44.10 or at least lose all the zeros.

View 9 Replies View Related

AutoCAD LT :: Area Calculation For Square Footage?

Sep 11, 2012

how the area calculation works for finding the square footage of a dwg.

I can easily get a rough estimate of square footage on L X W....but when i use the area measuring tool, i get total inches and a total sq foot estimate of 1.7xxxxx which i don't understand.

View 4 Replies View Related

AutoCad 2D :: Multiple Object Area Calculation

May 16, 2012

How to get multiple objects area easily. i am using auto cad 2009.

View 2 Replies View Related

AutoCAD Inventor :: Container Sq Area Calculation Verification?

Sep 26, 2011

I am trying to calculate the area of our parts.  I was trying to do the math my self but I kept getting a lower area than IV.  I haver attached a picture of what I get from IV. I have listed my calculations of the angle iron below: 

I am using IV Pro 2011 Educational SP1

i7 2600
8GB ram
1Gb GTX 560 
Cart 72 lbs 4006 sq in
All calculatoins are in ^2
(4) 2x2x1/8x48=92.928, 371.712
(4)2x2x1/8x33=63.888, 255.552
(4)2x2x1/8x29=56.144, 224.576
(2)2x2x1/8x32.669=31.623592, 252.988736
(4)2x1/8x2=32.912 
Total = 277.495592, 1137.740736

View 4 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Change Sum Area Calculation Mm2 Into M2

Jan 6, 2012

i've got a lisp-routine that calulates multiple area's and put the sum in text in the drawing on the place i select.

the sum has to be devided with 1000000 so that it is in m2.
 
the lisp-routie i use is:

(defun c:ca(/ pt ent txthgt)
;;; bepalen van de teksthoogte indien current style height = 0
(setq txthgt (cdr (assoc 40 (tblsearch "STYLE" (getvar "TEXTSTYLE")))))

[Code]......

View 4 Replies View Related

AutoCAD Inventor :: Creating Dome - Surface Area Calculation

Feb 23, 2013

How to create a dome using just the surface area?

View 1 Replies View Related

AutoCad :: Conflict Area Between List Command For Hatch And Calculation

Apr 4, 2013

I find conflict area between list command for hatch and calculation.

when do you make calculation list of plines 2381.399
when do you make calculation list of hatch 2545.948

View 1 Replies View Related

AutoCAD Civil 3D :: Top Soil Calculation

May 15, 2012

I have an existing contour surface. I would line to calculate the volume of  topsoil which will be 300 mm following below the existing contours.

View 3 Replies View Related

AutoCAD Civil 3D :: Calculation Nodes Are Always Flooding

Nov 30, 2012

I have trying to run lift station simulations and my calculation nodes are always flooding. They don't flood in real life so what could be a problem?

View 6 Replies View Related

AutoCAD Civil 3D :: Using A Surface For Volume Calculation?

Sep 25, 2012

I have run a volume between two surfaces, I need to further to break that new volume surface up to get volumes for each section. I know in microstation you can fence a volume surface and it will tell you the volume for that area. Is there a function in civil 3d that works like this. I know I can break it up manually and create new surfaces, I am looking for a time saving appoarch and trying to minimize file size.

View 2 Replies View Related

AutoCAD Civil 3D :: Reservoir Volume Calculation

Jun 11, 2012

I want to use 3D civil software to calculate the the reservoir volume from the attached micro seismic data. 

View 7 Replies View Related

AutoCAD Civil 3D :: Volume Dashboard Calculation

Sep 3, 2013

volume dashboard on which method of calculating is based. Why sometime are different, huge differences between  counting volume based  in "computer materials" which of 3 is the best? for calculating? I am using very often average end area, is that correct?

View 2 Replies View Related

AutoCAD Civil 3D :: Cut Fill Calculation Method

Jan 2, 2013

I'm new in civil 3d road design so my question may be basic.when i prepare a corridor and proceed to get cut and fill it appears as zero.i think i made some mistake at a stage when in section line we decide surfaces..step wise from section line selection to cut/fill calculation also give me the general concept regarding selecting surfaces during cut/fill volume calculation?

View 5 Replies View Related

AutoCAD Civil 3D :: Pond Volumes Calculation

Jul 24, 2013

I have a manure storage pond that I am trying to figure out the total storage volume for. It has 2.5:1 Side slopes and a 10 foot wide ramp at 10:1 entering the pond to the floor bottom. I am trying to figure out what the volume of this pond is. What is the fastest and most efficient way to get this volume? I do not want it compared to any other surface such as existing ground.

View 7 Replies View Related

AutoCAD Civil 3D :: Surface And Volume Calculation

Nov 13, 2013

I attach picture 1 and 2.  

I need to create surface like this picture 2. I need crate surface by joining 1, 2, 3 like as picture 2 section, but when i crating surface its joining as picture.

This problem have been found . I created a tofo of the rock which rock is bend lower picture 2 section to calculate the volume i need the surface create like this. 

View 2 Replies View Related

AutoCAD Civil 3D :: Volume Calculation Of Dirt Excavation

Apr 14, 2013

how to calc dirt quantities in Civil 3D. Not just on roads, but say you have a small mountain of dirt that needs to be hauled away, and the contractor asks if you can quickly tell him how much dirt is there. And subgrade quantities for pads. Things like that.
 
First off, I'd need to learn the correct terminology. Knowing what to call stuff can at least make you sound less stupid when you ask a question.

HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014

View 4 Replies View Related

AutoCAD Civil 3D :: Hydraulic Calculation For Pressured Pipes?

Aug 4, 2012

how can i do hydraulic calculation for pressured pipes using autocad civil 3d or by using any other autodesk application or extension

View 2 Replies View Related

AutoCAD Civil 3D :: Hydrographs - Calculation Of Basin Slope

Feb 22, 2012

In hydrographs, SCS method, the basin slope is needed for the the calculation of the time of concentration. What is the method for the calculation for the basin slope ? If we have a 3D surface is there a tool in autocad to calculate that automatically?

View 3 Replies View Related

AutoCAD Civil 3D :: Volume Calculation For Faces Object?

Jan 9, 2013

I have a volume in my CAD file described by 3D Faces. Is there anyway to know what is the volume of this volume -that represents an open pit-?

Every time that I do a volume I do by the comparison of 2 surfaces but this is not the case now.

View 6 Replies View Related

AutoCAD Civil 3D :: Stripping Calculation In Surfaces And Corridors

Aug 8, 2013

I've recently started working with Civil2012/2013 (bit the bullet you might say).

I attended a course on civil about a year ago but it didn't cover all the bases.

My question: stripping calculation, is there a way fro civil to perform it automatically?

One way to calculate stripping (manually) is after i have all the tin volume surfaces, is to show the fill areas in the volume tables and then do the calculation myself.

View 2 Replies View Related

AutoCAD Civil 3D :: Volume Calculation Method - Cut And Fill Are Not Even Close?

Sep 4, 2012

I'm to compare volumes in c3d to Inroads. My volumes are not matching ( cut and fill are not even close). Civil 3D uses  the average end area and InRoads uses 'triangle method' to calculate the total volume. How can I get C3D volumes to match InRoads which is verified correct?

View 5 Replies View Related

AutoCAD Civil 3D :: Area / Square Area In Closure Summary Of Mapcheck

Oct 23, 2012

How to changes the settings for the "Square Area" in mapcheck's closure summary.  When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area".  Why are these both there?  It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.

Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST

View 2 Replies View Related

AutoCAD Civil 3D :: Minimum And Maximum Elevation In Volume Calculation Summary

Jun 30, 2012

What do the data in the summary of volume calculation mean? In LDD, typically the minimum and maximum elevations are within the range of elevations where the volume is being analyzed. In my current vol calc summary it shows something that really makes me frown, e.g, min elev of -26.00 and max elev of 752. I have checked all the proposed elevations and the minimum is 720.

View 9 Replies View Related

AutoCAD Civil 3D :: Enter Name Of Drawing To Open?

Jan 2, 2007

After a recent crash civil 3d now asks me to type in the full path and file name for a file i want to open after selecting the open option on the menu or toolbar.i know there is a variable that requires re setting but i don't know how.

View 9 Replies View Related

AutoCAD Civil 3D :: Manually Enter A Traverse

Apr 11, 2012

If you were to manually enter a traverse in 2012 how would you do it? I mean:

1. Set up on a known point

2. Backsight a known point

3. Move the setup a few times

4. Foresight a known point (either the same BS point above - closed - or another known point - closed connected)

The COGO geometry editor does not really seem to do this.

Am I limited to the survey command editor and the survey command language? Or is there something else?

View 2 Replies View Related

AutoCAD Civil 3D :: Active Viewport Boundary Highlight Is Offset?

Jan 2, 2013

I've been putting up with this problem for a while. I have a certified 3D device with a driver version that is certified (Quadro 4000) but the active viewport boundary highlight is out of place. The white lines in this image are my viewport boundary highlight which is out of position.  This only seems to happen when I turn off the viewport layer. If the viewport layer is on the highlight appears as expected.

Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1

View 9 Replies View Related

AutoCAD Civil 3D :: Acreage - Pick Multiple Objects / Highlight And Adds Total

Sep 25, 2012

I love the area command how you can pick multiple objects and they highlight and adds the total. I was wondering is there a way to do that same concept but with multiple objects and total it to acreage?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved