I love the area command how you can pick multiple objects and they highlight and adds the total. I was wondering is there a way to do that same concept but with multiple objects and total it to acreage?
View 9 RepliesI have linked a DWG-file from Autocad in to 3ds max. I would like to use the substitute modifier so that objects ends up on the right spot even if changes are made in the DWG-file. The problem is that in Autocad there is one block for example for the trees in a pot, but in max there is one pot and one tree. I would like to keep it that way so I am able to change the parameters for my trees.
How can i use the substitute modifier and pick multiple objects? It is not possible with groups, it only uses the one object I pick, even if it is in a group.
So, to make things clearer, I want multiple max-objects linked to one autocad block via the substitute modifier!
How Do I find the total length of several objects or separate lines without having to click on each one individually and add them up.
View 5 Replies View RelatedI am having trouble with my selection box. Ordinarily, when I am trying to select multiple object, I can just create multiple selection boxes and it keeps adding more and more objects to my selection. However, it recently started acting funny--it stopped selecting things after the first box was drawn. No matter how many boxes I drag, it won't add any more objects to my selection.
View 3 Replies View Relatedwhy when i export artboards there are not the size i specify but 1 px more than the one i wanted.(fil>export>artboards checked).i checked if it overlapping or not it s the same result
View 1 Replies View RelatedI have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
I have a large group of lines that I want to get a total length of. Right now the only way that I know how to do this is to highlight them all and use the list command but then I have to go through the text box and write down each line length and then add them up. This is fine if I have only a few lines but when you get into the hundreds or thousands it becomes a monster task.
I tried copying the text box data into a Word document, removing all of the text except for the line lengths and then dumping that into Excel to calculate. This works ok for a hand full of lines but is not really practical.
I know that there are LSP routines that can do this in the full version of AutoCad but LSP is not supported in AutoCad LT.
Is there a way to automate this process in LT?
Or maybe extracting just the length data from a line to a text file where I can send it to Excel and use Excel to add up the lengths?
What is the difference between using the Pick Points and Objects selection methods in the Boundary Hatch and Fill dialog box?
View 2 Replies View Relatedthe issue is when i try to publish multiple dwg files which containing civil 3d objects including data ref to pdf it won't do it other whatever drawing is currently open.i kinda can see why. because the data ref reading is not programmed in when "invisibly" opening the cad files. xref are autocad native and it works.
so no warnings or anything. just publish the first one and told me it's done. i've seen this years ago when first started using civil 3d but then i just never complained here.
is there a solution for this? what i did before was obviously open each drawing. then publish, huge waste of time. making me hate my job because of repetative tasks. i almost always try to automate.
yesterday made a program to make one surface for each csv file there was hundres of them and basically 2 hour programming and 1 minute to process the files once got the program working.can read subfolders to find csv file too.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
Any way to add all the areas of a space style to get a total SF#? Is there a way to add this information to a display theme style legend?(preffered) Is there a way to get this information in to a schedule? (less desirable)
View 1 Replies View RelatedI can not remember how you do this QTO seems to only let you pick one object at a time surely there.
is a faster way crossing windows does not seem to work within the command.
I'm laying out a drawing with all tabletops used in our project for a linolium- fitter to set a price on covering the about 12 tabletops in total.
I dont know if this is correct English or if it make sense at all, but what I was wondering about was: Could you retrieve the total m2 of all the tabletops in a drawing? Or do I have to go back to the aim and get them one by one?
Can I create a pipe network from multiple objects?
For example, I have 10 feature lines that I want to use to create one pipe network. Instead of creating 10 pipe networks one at a time, can I create one pipe network all at once?
What settings has changed to make any polyline I offset to add a radius fillet to it. See attachment
Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000
I have projected objects to multiple section views (ProjectObjectsToMultiSect) but now I want to remove them all. How do I remove all of the projected objects?
I can select an individual section view and go to the Projections tab in the Section View Properties and uncheck the projections, but how do I do this for all the views at once.
I use flat piano hinges on doors for many of the machines we build. I would like to be able to calculate the total length of multiple doors on a single machine. We buy these hinges so it needs to go on a buy out parts list.
So here is my problem:
To make it a useable hinge I build an assembly from two hinge halves.
This allows me to check for interference within the machine when the door gets opened.
I set the BOM structure of the assembly to purchased so it shows up on my buy out list.
Both halves of the hinge are set to normal.
There are hinges of different lengths on the same machine.
I can link a parameter of one of the halves to the assembly to show length of the hinge but I cannot set the BOM base qty on the assembly to that parameter so Inventor can add up the lengths.
When I group the items in a buyout parts list the result is "0." The individual assemblies show the correct length because I use the "length" parameter that is linked for the QTY in the parts list. But I cant "add" the lengths and have a total whe I group them.
I need to have mixed units in this list. Some things are bought as Each and these hinges are bought in length.
I have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View RelatedI am trying to make a pyramid in which there is total darkness, this is for testing self illumination effects and lights without outside influence. So i made a pyramid and gave it a shell and material, but if i look inside, every object inside of it is fully illuminated! How to keep light from reaching the inside of an object?
View 2 Replies View RelatedI need to scale up about 300 circles (manholes) but i need to hold the center point of each manhole. is there a command for this so i don't have to scale each individual circle?
View 6 Replies View RelatedI'm looking at several surveys and using plines to quickly map it out and divide. But then to find the area in acres, I'm using a seperate calculator to convert the area given in the properties box.
I've searched and found that there was lisp used before acad 2011. and was hoping that there maybe a way for acad to do it now.
Can I just change the units from sq ft to acres in that field on the properties box in acad 2013?
I have numerous text objects I want to rotate 180 while retaining each text objects insertion point. There's got to be an easy way to do this.
Long explanation: I created an annotation template to label pipe diameters on an imported shapefile. Everythings good, labels are parallel with lines, except for the fact that some labels are upside down. Is there an expression that would eliminate this? In my annotation template, my rotation expression equals the "angle" field of the object. My "quick and dirty" fix was to burst the annoation labels, and manually rotate necessary text, which wasn't a huge headache since I'm dealing with a relatively small number of labels, but in the future I might have hundreds of upside down labels.
This is something that used to be very easy to do in autocad (with a polyline) and checking the length on the properties bar. When I select multiple lines (chain of lines) the "length" data is greyed out. I hate having to measure every segment separately!
View 9 Replies View RelatedI've never learned how to shade or highlight objects but I see that as the next step in my development. Where do I begin? Are there any tools or shortcuts?
View 3 Replies View RelatedHow can I transfer (download) measured data from total stations 'Trimble' and "Leica" to AutoCAd Civil 3D 2013? Must I find a module from the sites of these manufacturers? Or how can I change from total stations formats to the Feald Book format?
View 6 Replies View Relatedwhy my model shows an event mean storage of 20396 cf when I don't have any storage nodes? How is the model storing that amount of water? I'm thinking this is why my total inflow doesn't match my total outflows?
View 5 Replies View RelatedI want to create a function to pick a profileView(Alignment/.. in the future) in the drawing. I just get entity which type is Autodesk.AutoCAD.DatabaseServices.ImpCurve from GetEntity, and I failed when I try to cast it to Autodesk.AECC.Interop.Land.AeccProfileView. Is there any way I can pick a profile from drawing in .net?
Civil 3D 2007 and Visual Studio 2005
Attached are two files: 1 file has 0 values on the volume table, and the other file has Sample line group Properties.
Surface 3 is the surface that has the existing actual survey points . Do I have to pick another surface : the other two are the surfaces I created in the Corridor as surface boundaries , Top and Datum
Just want to ask if there's a script command or syntax in Ventura 8 to highlight and select multiple lines?There is a marker/paragraph tag to mark the beginning of the first line to be highlighted and selected, and also another marker/paragraph tag to mark the end.
Sample here...
line 1line 2line 3begin_select lineline4line5line6line7end_select lineline 8line 9line 10
Well, above is just simplified document sample. The main goal is to have a script to select multiples lines that will start from the marker "begin_select line" and selection/highlight will terminate at marker "end_select line". Thus, giving the output of highlighting and selecting multiple lines which are line4 up to line7.
I have a PSPIMAGE file with a plenty of images as different layers. I am adjusting the images having one image "size" as reference (make same width and height). But I could select the multiple images just through layers pallete
whether is possible to select multiple pictures (each in different layer) by using the "pick tool" direct in the canvas (or other means)?
I have just created a Total Volume Table and everything is perfect in Model, but when y change to layout, the table is miising. I can barely see the title of the table zooming, but anything else. The tables are still there, but so tiny and with just the title, there is no data!
View 1 Replies View RelatedI oftenly do conception for parkings and always need to have the calculated rentention of water volume in the pipe network.is there a way to have that information with Civil 3d ?
Googled the subject and i only found a topic on trench's for the pipes ...
Cyberflow
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro