What settings has changed to make any polyline I offset to add a radius fillet to it. See attachment
Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000
Is there a way to put a FILLET radius in a polyline? (2D dwg)
e.g. a straight line crosses a radius, both lines trimmed off, turned into a polyline and joined using PEDIT.
When I try to put a FILLET radius between the straight line and the original radius, the command line quotes;`Cannot fillet polyline arc segements'
I'm having a problem with the fillet command using a radius, I can't seem to get a rounded corner. I have the radius set at 1.00. I should see a rounded corner. If I set it at 0.00 or 1.00. I get the same result. Something doesn't seem right! Could it be a setting.
I viewed a few videos on Youtube and I can't replicate the same filet with radius results. I watched one that you can select radius by right clicking mouse. A text box appears to the right of the cross hair cursor where you can input the radius. On my screen that does not come up.
I need to fillet below lines in .net...Iam having the entities list..How to fillet those lines with radius using .net?
View 2 Replies View RelatedI want to put a 5 mm radius fillet on the upper edge. After 1.5 mm it will not...Why? What can I do? Convert it to a mesh object? Or?
View 9 Replies View RelatedIf I define the fillet radius in a drawing and close the drawing, then next time I open the drawing, the fillet radius has defaulted back to 0 and I have to redefine it again. Is there a way to maintain the fillet radius in a drawing so that I do not have to redefine it every time I open the drawing?
View 3 Replies View RelatedI am trying real hard to fillet the edges of these designs but it keeps saying try again with a smaller radius.
View 5 Replies View RelatedACA 2013: We have notice that autodesk has added a quick preview for fillet and offset. It shows what the fillet is going to look like or what the offset is going to be. Is there a way to turn this off?
View 3 Replies View RelatedHow to fillet a 3D polyline with AC2012?
OR
How to automatically set the corner bend radius of a sweep along a 3D polyline?
The attached image shows what I did in a different program, but need to repeat with AC. The swept 3D object is moved off its path in the attached image.
When joining 2 pipes (cylinders) how do you get a radius/fillet where the 2 pipes intersect? How can you control the radius size? Attached is a 2010 version and 2013 version MAX file. piperadius.zip
View 2 Replies View RelatedHow to fillet a 3D polyline with AC2012?
OR
How to automatically set the corner bend radius of a sweep along a 3D polyline?
The attached image shows what I did in a different program, but need to repeat with AC. The swept 3D object is moved off its path in the attached image.
Is there a way to sweep a 3d polyline in AutoCAD 2012? Colleague has a sweep path that he wants to put radii in the corners. I know that in the past you could not do it. I didn't see anything in any post that told me otherwise.
View 3 Replies View RelatedI've been searching on and off all morning for a lisp routine, without any luck. I'm trying to draw a pline with a pre determined width (5") and be able to draw unlimited line segments then automatically fillet with a pre determined radius (5").
I wrote this generic macro: ^C^CPLINEWID;5;PL;\\;FILLET;R;5;F;P;LAST; to save SOME time but I want unlimited line segments. Can this be modified or would a lisp be the better route to go?
how to check the radius of a polyline arc?
View 6 Replies View RelatedI have a lips that creates a zero radius fillet.
(defun c:FZ () (setvar "FILLETRAD" 0)(command "_.fillet" "multiple"))
This works great.I would like to expand this by turning the line into a polyline..
I keep getting an error that reads: "Cannot fillet between these two entities."
This occurs when I try to use the radius option when filleting an arc and a polyline. I am unsure as to why this occurs on and off on my drawing, as it has previously worked on other sections. I have attatched a copy to make things easier and highlighted three areas where I am experiencing this problem. I am using AutoCAD LT 2006.
I am drawing golf course features and I need to reduce the number of nodes on an a line that has been offset from a splined polyline. I want to tweak the shape of the offset line but there are a trillion nodes which makes it impossible.
View 2 Replies View RelatedI need an offset lisp routine to offset a selected line a set distance on each side of the selected line and change the layer of the offset lines to the current layer, and then keep prompting me to select the next line for offsetting until I'm finished.
View 3 Replies View RelatedWhat is the command to offset a polyline in all dimension as shown in the attached?
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
I have a diamond pattern that needs to be a polyline and also needs to be offset on each side of the diamond. When I create a polyline out of one diamond pattern and then try to offset the polyline pattern a certain distance on each side, it will only let me offset to one side and not the other.
View 9 Replies View RelatedI am trying to create a station-offset label style that will drop the trailing zeros in the offset section - e.g. 15' instead of 15.00', but if the offset is not at a whole number, e.g. 15.01, etc. it will display the entire offset.
I created two expressions: IF(OFFSET-TRUNC(OFFSET)=0,.1/12,.00000001/12)
and this one: IF(OFFSET-TRUNC(OFFSET)!=0,.1/12,.00000001/12)
I then created two offset components, one called truncated, and one called full, and assigned the heights to match the expressions.
I have attached the file, the style is ACHD-Sta Off-Rt [copy]
C3D 2011, Win x64
how to offset a opened polyline by pick point on side of opened polyline.
View 3 Replies View RelatedI cant find solution for my polyline plotting problem, because I cant really define it, so google wont give me proper answer.
I have made object by joining polyline and part of a circle, which I turned into polyline by using pedit. But when I try to plot it to pdf it shows as slightly offset combination of elements.
I've been looking for a lisp program. I've tried to mix-and-match code to come up with a working lisp but nothing is working. I am using a polyline rectangle to start with, offsetting it out 0.75 outward, and triming everything outside of the offset and erasing the offset.
View 9 Replies View RelatedI want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedI love the area command how you can pick multiple objects and they highlight and adds the total. I was wondering is there a way to do that same concept but with multiple objects and total it to acreage?
View 9 Replies View RelatedAny way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
I create a feature line including some arcs. While editing I need to redimension the feature line, but the arcs will lose tangency. Therefore I have to break/ trim/delete/manually edit the tangents until they intersect and then FILLET them to get a new arc. I tried EDIT CURVE with 0 Radius but it's not acceptable. Any workaround on this one (filleting feature lines like polylines or a closing option)?
View 2 Replies View RelatedI am working on custom subassembly and I would need different scenarios for different radiuses along the alignment. Is there a way how to find out this current value?
View 2 Replies View RelatedI'm grading this pad site from EL.215 to EL213 at a 2:1 slope. I use "grade to elevation" but I don't want the corner to fillet. I need the grading to fill in to the retaining wall (red line). I tried using infill but I can't get the fill slope display to show up.
View 9 Replies View RelatedHow to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View Related