If I define the fillet radius in a drawing and close the drawing, then next time I open the drawing, the fillet radius has defaulted back to 0 and I have to redefine it again. Is there a way to maintain the fillet radius in a drawing so that I do not have to redefine it every time I open the drawing?
View 3 RepliesI'm having a problem with the fillet command using a radius, I can't seem to get a rounded corner. I have the radius set at 1.00. I should see a rounded corner. If I set it at 0.00 or 1.00. I get the same result. Something doesn't seem right! Could it be a setting.
I viewed a few videos on Youtube and I can't replicate the same filet with radius results. I watched one that you can select radius by right clicking mouse. A text box appears to the right of the cross hair cursor where you can input the radius. On my screen that does not come up.
I need to fillet below lines in .net...Iam having the entities list..How to fillet those lines with radius using .net?
View 2 Replies View RelatedIs there a way to put a FILLET radius in a polyline? (2D dwg)
e.g. a straight line crosses a radius, both lines trimmed off, turned into a polyline and joined using PEDIT.
When I try to put a FILLET radius between the straight line and the original radius, the command line quotes;`Cannot fillet polyline arc segements'
I want to put a 5 mm radius fillet on the upper edge. After 1.5 mm it will not...Why? What can I do? Convert it to a mesh object? Or?
View 9 Replies View RelatedI am trying real hard to fillet the edges of these designs but it keeps saying try again with a smaller radius.
View 5 Replies View RelatedWhat settings has changed to make any polyline I offset to add a radius fillet to it. See attachment
Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000
I got a new computer (Windows 7) at work this April and as of today, when I work on any of my JPEG images in PS CS5,suddenly it has defaulted its "Save As" to JPEG2000. How did this default change and how do I get it to default save as. JPEG again? There was nothing I noticed and no warning as to why this has changed, I didn't touch a thing!
(Last week, Adobe had to work with our IT manager to fix a problem that started occuring with my new Adobe Acrobat Pro 11 program. They had to log into my computer and change a registry thing to get it to work properly again...also something that changed without warning!!)
When joining 2 pipes (cylinders) how do you get a radius/fillet where the 2 pipes intersect? How can you control the radius size? Attached is a 2010 version and 2013 version MAX file. piperadius.zip
View 2 Replies View RelatedHow to fillet a 3D polyline with AC2012?
OR
How to automatically set the corner bend radius of a sweep along a 3D polyline?
The attached image shows what I did in a different program, but need to repeat with AC. The swept 3D object is moved off its path in the attached image.
I am attempting to fillet plines to make rounded curbs at street intersections. Whenever I create the fillet, the 2 plines that were filleted remain as they were before the fillet.
This only happens on my computer and only in AutoCAD 2011, it works fine in Civil3D 2011. We only have a limited number of Civil3D licenses or I would just use that all the time.
The attached screenshot shows an example of what happens. The 2 red lines are what were filletted (the fillet is in white). Both lines are long enough to accomodate the radius of the fillet.
What is causing this problem?
Is there a way to sweep a 3d polyline in AutoCAD 2012? Colleague has a sweep path that he wants to put radii in the corners. I know that in the past you could not do it. I didn't see anything in any post that told me otherwise.
View 3 Replies View RelatedIm drawing the image below for school but I cannot figure out how to create the radius dimensions as they shown.
The only ones I know how to do are they .25 and the .75 diameter. I have tried changing the dimension style in every way I can think of. Just to clarify the 1.31 and .63 radius demotion how the leader starts in the center and the arrow is on the inside of the circle yet the text has the extended leader and is outside the circle and the other radius demotions the text is in the middle of the leader is what I am trying to learn to do.
The question is that I want to draw a Circle with the command Tan,Tan,Radius but when I try to find an ellipses tangent, it never shows up. All OSNAP options are on.
View 9 Replies View RelatedWhen I dimension an arc to find the radius, the dimesnions appears as a line going from teh center of the arc to the edge of the arc with the dimension in the middle. I don't want this. I want a leader pointing to the R text and that's it.
I've attached a photo of both scenarios- one dimension is the style I don't want, and one is basically the style I want (I'd like it to be more of an elbowed leader line), but it only appears when I use AutoCAD's ISO25 dimension style.
I am new to AutoCad, and I'm sure this is a simple question. How do I put radius dimension in fraction format?
View 4 Replies View RelatedI design a small plant in Autocad 2012. For the pipes we used cylinders, now we need to make the bill of materials, but I don't know how to extract the data from each cylinder(radius and height), after I will be able to do this, I can make the material list, but I don't know how and I am having so many cylinders.
View 9 Replies View Relatedi can't change the radius of a solid body.
example :i made a radius with the command "fillet edges",radius=50 mm.
the next day i decided to cahnge to radius= 30 mm.
i presssed the "ctrl" bottom, clicked the radius surface to change ,but in the properties tab was written "solid face",with no radius change option.
finnaly i delleted the radius face,and made a new solid edge radius.....
is this the only way?
(solidhist variable is set to 1 ).
Changing the curb return radius after the intersection has been created. I am able to go back to the curb return parameters dialog and enter a different value, but once I hit Enter or OK the value reverts back to the one I orginally used.
So it looks like I have to delete the intersection object and re-start the wizard from scratch. Not that it's a big deal, just thought there might be a way to make the change once the intersection is built.
I have an annotation family with about ten different types built into it. When I import this into a project, the Arrowhead option (in the Type Properties) of each type is set to 'none'. I do not see anywhere in the family editor to set that value to 20 Degrees Filled. Is there a way to accomplish this, or must I set the arrowhead values each time I load a tag (which seems absurd and redundant).
View 4 Replies View RelatedI've been trying to incorporate my menus and toolbars into the ribbon environment. I skipped acad 09 so this hasn't been fun. I used the transfer feature in the cui environment to get everything I wanted. I go to 2d environment to check that everything is there and it appears to be there. I load my cui and I get my icons and menus but no ribbon. I have a big message that says, "The Ribbon does not have any tabs or panels currently loaded." I type ribbon to load, but nothing.
I've now messed with this enough that even with the base acad.cuix file I still don't have the ribbons.
I use auto cad 2010.In my computer .dwg file is deleted but .bak is in my computer but when i rename the .bak file to .dwg file but it not open in auto cad 2010.
View 5 Replies View RelatedMy company just got all new computers and upgraded out AutoCAD to 2012 from 2009. And every single drafter has complained to me that the new Array is terrible. Basically, it seems to take 10 times as long to set up and array as it used to and now it's linking all of the objects together as a group which is absolutely terrible for what we do especially when we are making 4 or 5 columns or hundreds of objects. I cant find any classic or legacy array commands.
This really needs to be put back in because right now everyone is asking us to put AutoCAD 2009 back on the computers, and the whole reason we bought new PCs is because they couldn't run anything after 2009 without being too slow to be productive.
I have been using AutoCAD Civil 3D lately but went to use my AutoCAD 2011 I noticed I have no hatch patterns. I thought that these patterns were located in the support folder so I got my DVD that has the program on it out and was going to reload AutoCAD to fix the problem. It would not reload it so I copied the support folder to my computer in the AutoCAD file and still nothing. What can I do to get my hatch patterns back?
View 7 Replies View RelatedHow do I keep the tool palette from going back to the default after I set it up?
View 2 Replies View RelatedI'm trying to find an option to hide all constraints in a drawing, I am familiar with the toolbar option to turn display constraints on and off but my issue is that it's not a permanent toggle. Every time I change from a paper tab to the model tab or activate a viewport the constraint display is automatically turned on again and I must wait for the constraints and the drawing to generate. When playing checker I am frequently changing tabs or checking within a viewport, this is adding significant time required to check the drawing. I have not been able to locate a system variable or command to "freeze" the constraints until I want to see them again. an option to allow me to turn off constraint displays as I'm desiring or is this a Wish List item for R2014?
View 3 Replies View RelatedI use the 3DCLIP command a lot in my work.
What is really disappointing is that whenever a solid (or xref or block) is sectioned this way, it shows a back faces of that object. It makes the view messy and confusing, and then I have to use whiteout all over my paper space to make the drawing readable.
See attached PDF.
I have a couple of floating licenses for an old inventor series 11 product. The license server is down and I need to change these licenses back to standalone licenses. I tried uninstalling and reinstalling as standalone but it will not let me activate the software with the serial numbers on the back of the packaging.
View 2 Replies View RelatedFor example, whenever you use the distance command it automatically turns the dynamic input back on. We have turned off the settings under drafting settings - dynamic input. I have also turned off the tooltips under options - display tab. Is there a patch or update?
View 3 Replies View RelatedWe have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
Fillet works fine on a single curve and straight lines, but I'm having trouble using the fillet command on two curves (arcs). I have two circles which I have trimmed into arcs roughly to the correct length, when I try to fillet them (with various radii) the filleted curve either connects to the wrong end of one of the existing curves, or the filleted curve curves in the wrong direction. I've used this tool a lot before and have never had problems - until now. Is there a way to decide which way the fillet curves?
View 8 Replies View Related