I was given a .sat file from a third party company. When i pull it into CAD 2011 it comes in as a "body". It views like a wireframe object. I can't slice, subtract, union, etc. when i import it to Navis works it views like wireframe. The problem with this is that i can't run clash detection against this part then.
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
Changing the curb return radius after the intersection has been created. I am able to go back to the curb return parameters dialog and enter a different value, but once I hit Enter or OK the value reverts back to the one I orginally used.
So it looks like I have to delete the intersection object and re-start the wizard from scratch. Not that it's a big deal, just thought there might be a way to make the change once the intersection is built.
what is the best way to flatten out a radiused peice of sheet metal with holes in it. i know how to flatshot but how do I flatten this for laser cutting and shearing
I'm trying to create a solid body from a non uniform 3d frame Actually I bought this model and it turned out to be hollow inside. How to make it a complete single solid body? [This model is a part of human bone]
Is there any way of dimensioning the radius of a cut out made on a 3D solid?
The cut edge is not detected as a radius even when orthographic set at 90 deg to the cutting plane. Do I have to use solview/soldraw etc to create 2D versions of the view to dimension?
I get the same issues when trying to dim wall thickness, overall widths of tubes etc.
I'm making drawings of assemblies in Inventor 2012 and was wondering how to turn off the visibility of specific solid bodies within a single part containing multiple bodies, or make it match the visibility in the assembly and part file itself.
In particular my situation is that I have a camera whose part model includes a solid body for its view cone. The visibility of this solid is turned off, so when opening the camera itself, or the assembly containing it, it doesn't appear, but when I place that assembly or part in a drawing it's included, and the only way I've figured out to get rid of it is to turn the whole camera's visibility off within the drawing.
I want to make an ipart of a container with as customizable parameters (the Diameter and the Volume of one of the solid bodies).
[URL]...
Here comes the problem:
when i was changing the volume parameter, i recieved an error that this property was read-only.is it possible te use the volume calculation from inventor the calculate back to the diameter or height? ,and also for a solid body?
If so, what do i need to do? I am using inventor 2013 (basic).
Is there a way to get that long tube and that rectangular part all around that middle circle.
[URL]........
Open this picture. In the end it would end up looking something like that lamp shade. I got one part down so is there a way to get a bunch of those around instead of redrawing it?
I am trying to convert this composite surface into a single solid body, however when I try to stich the surfaces in the construction environment it always crashes. I have also tried edditing the STEP file import options but it still always opens as a composite surface.
I have created two solid body in the modeling mode &maintained seperate body ( Didn't combine) there after hide & visibility off one solid body .while taking the detail that time two solid body is appearing. how to switch of the body in detail.
I've created an assembly by using "Make Components" from a part comprised of solid bodies. If I suppress a feature in the "Control Part.ipt" (the part that holds all the solid bodies) it removed the part from the assembly, but it does not remove it from the BOM. What do I have to do to make the BOM follow what the assembly looks like?
I'm trying to bolt a solid body (Honda GX160 engine) onto a piece of angle iron (from frame generator). Starting with a point on a plane on the engine, the Bolted Connection Generator will not let me select a termination plane on the angle iron.
IV Pro 2011 64bit SP2; Win7 Ultimate SP1 ASUS MB Intel i5-3450 @ 3.10 GHz, 8GB RAM ATI AMD Radeon HD 6600 Series, 1GB RAM
I have a multibody surface part, which is derived from a multibody part. Therefor there are multiple contiguous surface parts that are isolated from each other.
Is there a way to STITCH or convert one of these contiguous surfaces into a solid part ?
Note: I tried the THICKEN tool but the hole features do not come out right. Some holes are missing or the hole depths are wrong.
I've created a tie-on-cable marker tag using Loft, Replace Face and Split techniques. After splitting, I turn off the visibility of one of the two resulting solid bodies. File A208P03_Label.jpg shows the results with solid body Solid2 visibility either on or off.
The cable marker tag is then used in an assembly file shown in MI-CA-0261.iam.jpg and a drawing file shown in MI-CA-0261.idw.jpg. The problem I have is that Solid2 is showing up in the idw drawing file when I'd rather it's visibility be off as in the .iam assembly file.
I've made all sketches and workplanes etc not visible.
When i edit a sketch down the tree, obviously the sketch becomes visible but the problem I have is some other sketches and workplanes also become visible.
I'm currently using the "Make components" feature to convert solid bodies into parts. This works great, but we use this method to construct angular roof structures, and after the parts have been made the parts have angular relationships to the .ipt files UCS co-ordinates. It would be very useful if I could align the longest edge of the part (Which is a timber truss) with the x axis in the model space and "lay" the plank flat on the X-Y plane.
I just did a Circular Pattern of a threaded holes to a second solid body. The hole came through but the thread did not?Right now I have SP1 installed. I have been using solid bodies for a long time now and have not seen this.
I want to duplicate a solid body 4 times in a part file. i did that by going for circular pattern. But after creating that, i had to add on few more features. I did that in parent solid body. then I noticed that other 3 solid body is not getting updated. I know in assembly file it gets updated but any way in part file.
if i draw up a 3d sold part as the finished part, can i then draw a new rectangle solid body over the top of this and split the new solid body using the part as the split tool?
the idea being that i am left with a rectangular plate with a female 3d impression of the finished part in the top.I can't seem to use the part as a split tool?
If we require to create patterned holes thru a number of solids, this works great only requiring the one hole feature.
However, once an assembly is created with the parts, (these parts obviously have their own derived individual solids in them) when needing to place a bolted generated assembly to the patterned holes. It won't recognise the pattern.
So I've come to the conclusion that the bolted generator/drop place function really needs improvement for solid body modelling technique. (Mind you, the BG needs a complete rethink because its at about 50% complete).
What I can see needs to be added, is the functionality of the parts recognising the hole pattern. e.g. when using the make components function it gives an option to add a link to the hole feature.
My only other option at present is to create the holes within the assembly file and transfer the hole feature to each part file. This obviously loses the parametric functionality.
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
I have been trying to bend a larger radius on a corner bend but i can not seem to be able to . I start out with a face of 46" x 82" i want to put a 1/2" bend up then a 1/2" bend out to make a z shape i'm using as a material .109 stainless steel and i want to end up with a 1/2" on the inside corners so that when i'm done i can flatten it out to get the proper sheer size for the piece the metal brake i'm using has a 1/2" die in thats why i trying to figure this out is their any way to put this kind of radius on the sheet metal bends.
