AutoCad 3D :: Flattening Out A Solid Radius?
Feb 12, 2012what is the best way to flatten out a radiused peice of sheet metal with holes in it. i know how to flatshot but how do I flatten this for laser cutting and shearing
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Flattening 3D Solid?
Jan 23, 2013I am drawing a column and I need to flatten out a section of it to get true size and shape to constructe a template.
View 9 Replies View RelatedAutoCAD 2010 :: Flattening Solid Objects?
Apr 5, 2012I am working on a design project for a class i am in, i need to make a model of the design solution i come up with. since my design has curved walls, how to take my AutoCad model and convert the faces to something where i could print them out on paper and make the model. I need to basically unroll them as if i was flattening them on a sheet of paper. i have tried flatshot and flatten, my difficulty with these is that it does not take the entire object length along the curve, it will only take the distance that can be seen on the screen. I know this is possible with 3ds max as a friend of mine did it that way, but i don't know how to use 3ds max so that doesnt work for me.
View 1 Replies View RelatedAutoCad 3D :: Dimensioning Radius Of Cut Out Made In 3D Solid
Mar 9, 2012Is there any way of dimensioning the radius of a cut out made on a 3D solid?
The cut edge is not detected as a radius even when orthographic set at 90 deg to the cutting plane. Do I have to use solview/soldraw etc to create 2D versions of the view to dimension?
I get the same issues when trying to dim wall thickness, overall widths of tubes etc.
AutoCAD 2010 :: Can't Change Radius Of Solid Body
Mar 19, 2012i can't change the radius of a solid body.
example :i made a radius with the command "fillet edges",radius=50 mm.
the next day i decided to cahnge to radius= 30 mm.
i presssed the "ctrl" bottom, clicked the radius surface to change ,but in the properties tab was written "solid face",with no radius change option.
finnaly i delleted the radius face,and made a new solid edge radius.....
is this the only way?
(solidhist variable is set to 1 ).
AutoCad 3D :: Convert Single Line Containing 42" Radius Curves To Solid 4" Diameter Cylinder / Pipe
Apr 14, 2013How to convert the single line below containing 42" radius curves to a solid 4" diameter cylinder/pipe?
Capture.jpg
AutoCAD LT :: Flattening 3D To 2D?
Mar 9, 2013I have AutoCAD LT 2008 and need to be able to flatten 3d objects. I have followed all instructions for the plot to dxb and have successfully saved the files but now can't get them to open. What are the next steps? I have tried to open a new drawing and open the dxb file using the 'DXBIN", and "DBOUT" commands which show as unknown commands.
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Select Non-solid Entities On Solid Layer
Mar 19, 2012We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
AutoCad :: Flattening Out Non-solids
Jan 12, 2012I have a single-line riser diagram in 3D I want to flatten to 2D. things like super flatten and such don't work because I'm not using solids, just single lines.
View 4 Replies View RelatedAutoCAD Inventor :: Split A Single Solid Body Into 2 Solid Bodies?
Sep 19, 2012I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
AutoCAD Civil 3D :: Import 3D As Solid Objects Or Convert Polymesh To Solid
Jun 18, 2013I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
AutoCAD 2013 :: Converting Complex Solid Surface To Solid Model
Aug 12, 2013I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedAutoCAD 2010 :: Remove Line Inside Solid Object / Transparent Solid Objects?
Sep 16, 2013How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
AutoCAD 2013 :: Trim A 3d Solid Using Another 3d Solid As A Cutting Edge?
Aug 27, 2013Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedAutoCad 3D :: Trim Diagonal 3D Solid To Top Of Horizontal 3D Solid In Picture?
Jul 10, 2013Is there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedAutoCAD Inventor :: Make Solid / Change Parameter Of Solid
Nov 18, 2012I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
AutoCad 2D :: Flattening Splines To Polylines
Sep 9, 2011I have topo contours that are splines. I want to flatten them so they become polylines that I can give elevation values. When I flatten some, portions of the topo lines become circles.
How do I fix it?
AutoCad :: Flattening And Setting Everything To Elevation Zero
May 2, 2012make a drawing to be flattened and set to elevation zero.
I do have the flatten command from express tools, and that works only to make everything to 2d, but i need a simple script routine to set all objects to elevation zero.
This is my current methodology
1. select objects
2. flatten
3. select same objects
4. explode
5. select same objects
6. explode
7. select same objects again
8. In property's, adjust Z axis to 0.
I fear that this is too long and bulky, and sometimes it wont work.
I also fear that any lisps routines are completely out of my league as i never used them before and my company never really had a need for them, but i am willing to give them a shot if it means that they will save me some time.
AutoCAD 2013 :: Hatching Looking Solid But Its Not A Solid Pattern
Dec 13, 2012i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedAutoCad 3D :: Subtract Smaller Solid From Bigger Solid
Nov 7, 2012I want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies View RelatedAutoCad 3D :: Convert Some Solid Bodies To Single Solid?
Dec 1, 2006How can i convert some solid bodies to a single solid.
View 8 Replies View RelatedAutoCAD Inventor :: Flattening A Cone With Knuckle?
Nov 16, 2012how to get a flat pattern from a cone with knuckle. I am using 2013.
View 5 Replies View RelatedAutoCAD Print / Plot :: DWG To PDF Flattening Process
Jul 7, 2009When I create a pdf using the dwg to pdf driver native to acad2010 it creates a pdf but when I go to print that pdf the processing time that it takes to print is outrageously long since when adobe reader goes to process the pdf to print it it says it is "flattening" the pdf.
How to remedy this problem? At this point the dwg to pdf driver in acad is unusable unless I can figure out how to create a pdf file that does not need to be "flattened" by adobe reader before finally sending off to the printer.
AutoCAD Inventor :: Flattening Part Of Curved Surface?
Dec 22, 2012I am trying to design a new mold for some sailing rudders I am building. The files I have for the current molds are in the IGS format, which Inventor can open. The current rudders are convex going from the widest part of the foil down to the trailing edge. The goal is to create another model with this flattened. If I were doing this in logic it would be: Find max height, alter foil to be straight from max height to trailing edge. I have tried everything I can do to make this happen with no avail. what would be optimal is if I could get it set up so that I can easily control the amount of convexness to the aft section, but the primary goal is to just get it to be straight. The trailing edge is the straighter one.
The final goal is to export to g-code and send off to a cnc.
I have attached the files after I have imported them into autodesk, but below is a link to the original iges files.
[URL]
AutoCAD 2010 :: Flattening 3d Objects For Fabric Plotting
Jan 10, 2012I need to take 3d objects, in this case fabric foils and flatten them so I can plot them on a table. Are there any plug-ins out there for use with Autocad 2012, or other third party software?
View 8 Replies View RelatedAutoCad :: Rotating Working Plane / Flattening Geometry
Dec 2, 2013Is there a way to rotate the plane you're working on on the fly? I have (what is supposed to be) a 2d floor plan with multiple elements that have non-zero z values, a lot of which apparently cannot be exploded, or sliced (after turning them to surfaces), or anything else. I tried to simply "stretch" the non-zero z vertices down/up to the xy plane and the whole object moves up or down instead. (I'm also using a LISP routine by Lee Mac to do the actual flattening after the fact).
So, what I want to do is simply draw in the 2d geometry necessary to project the object onto the xy plane, and then delete the extraneous 3d lines/objects. However, I'm working on an isometric view (to make sure I'm drawing them in at z = 0), and AutoCAD apparently thinks I want to draw "walls" (yz plane) instead of "floors" (xy plane), if that makes any sense.
Is there some button I can press to change the working plane on the fly? Why AutoCAD wouldn't have this sort of functionality when a much simpler program such as Visual can do it (just by hitting TAB you can swap between the xy, xz, and yz planes).
Alternatively, flattening geometry that does not want to be flattened?
AutoCAD 2010 :: DWG To PDF - Flattening During Printing And Black Boxes On Text
Feb 16, 2012I have an issue when using the DWG to PDF plotter built into AutoCAD 2011. It started when I would generate PDFs from AutoCAD and then try printing them to our office printer for a hard copy. I kept getting the "flattening" bar popping up which caused a set of 20 drawings to take 30 mins to print. Where other PDF generators the drawings shoot out of the printer ASAP. And in a busy office likes mine, tying up a printer for that long is kind of frowned upon. But they didn't solve my flattening issue. I tweaked the "Merge Control" as most of the posts mention along with turning off "layers in PDF" as well. My PDFs are still flattening. All my drawings are 2D...no 3D information.
And now I've noticed after changing the "Merge Control" and "Layer Display" in my pc3 file, it is putting black boxes on text that have a background mask...not a wipeout. I know there have been issues in the past with PDFs and wipeouts...but in my case it's the background mask function. I've even tried using a 255,255,255 colour for my background mask colour (instead of my default "background colour") and that didn't work. And the other weird thing is that it's not blacking out all text with background masks. On one drawing it'll be blacked out and in the next, the exact same piece of text will be fine. It's even only blacking out portions of lines of text. Completely random!
3ds Max :: UVW Unwrap When Flattening Map?
Apr 29, 2013When I do the UVW unwrap then chose to flaten the map I get little pieces that are "broken off" the main map what would case this?
Plus on a side note I can't do a search in these forums it tells me that I "don't have access to this area".
Photoshop :: CS5 / Why Can't See Adjustments After Flattening
Feb 5, 2012upon flattening layers in CS5, any changes made seem to vanish? This occurs when flattening adjustment layers and has even happened after e.g. Image>Adjustments>Curves (when I close the adjustment dialogue the changes aren't applied.) This doesn't happen on every photo ( I can have two open and it will only be seen on one) and I havene't ever had it happen before. It seems particularly likely to happen after applying HDR toning although I'm sure if there is any connection.
View 14 Replies View RelatedPhotoshop :: CS5 Flattening Without Permission
Feb 18, 2013-No I did NOT uncheck the layers box.
-No I did NOT accidently FLATTEN my piece
-No I didn't change the color space
why the eff my photoshop has flattened two of my PSD files without my permission.
I work in PSD then when done I hit save. Then File> Save as> PDF then I name my PDFS, do so for my other projects then I close everything. I've had two files already where I have opened the PSDS and they're flattened when I never saved them this way.
Photoshop :: Flattening Image Changes It
Feb 28, 2013When I flatten my image at completion, The images changes. Looks like my adjustment layers reset blending modes and adjustments. Tried uninstall, restart of photoshop and Mac, tried to flatten from tiff, psd and PDF. Same thing happens
View 10 Replies View Related