AutoCad 3D :: Subtract Smaller Solid From Bigger Solid
Nov 7, 2012I want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies
ADVERTISEMENT
AutoCad 3D :: Subtract One Solid From Another
Mar 28, 20123D Cylinders.jpg.How do subtract/cut the part of the magenta cylinder inside the gray cylinder from the attached pdf?
View 9 Replies View RelatedAutoCAD 2010 :: Solid Will Not Subtract?
Mar 27, 2013I have a solid of a vortex breaker for a nozzle in a cone, from which I subtracted the cone. But when I attempt to subtract the nozzle as well, it will not subtract. I have verified that both entities are solids. I copied them into a new drawing by themselves. I even rebooted my computer--all to no avail. I have attatched a drawing of the two solids.
View 2 Replies View RelatedAutoCad 3D :: Take 3D Solid And Subtract From It While Keeping It Parametric
Apr 29, 2012I am trying to build a 3d model of a flight case and when I subtract the handles from the center of the panel it looses its parametric capabilities. I am able to get around the latches by using the trim tool and than extruding to 3d. Is there anything I can do to allow handles?
View 5 Replies View RelatedAutoCAD 2010 :: Do Solid / Subtract With Array Items
Sep 27, 2011If you have a housing with say, 12 cylinders in the flange which are to be cut out of the housing to become the 12 bolt-holes. If you positioned your cylinders using polar array, are you supposed to be able to use the command solid/substract? I can't as it won't pick the array parts to cut. I had to resort to rotating/copy all the cylinders around the flange and then it works great. Any way to do holes through a solid...
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Subtract Solid With Clearance?
Jan 19, 2012know if there is a way to subtract one solid from another "with clearance" i.e. with an additional evenly applied clearance? I have seen this function in other applications, wondering if it possible somehow in Autocad?
View 1 Replies View RelatedAutoCAD Inventor :: Subtract One Solid From Another Then Turn Remainder Into Multiple Solids?
Jun 6, 2013what's the best way to subtract one solid from another then turn the remainder into multiple solids?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Select Non-solid Entities On Solid Layer
Mar 19, 2012We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
AutoCAD Inventor :: Split A Single Solid Body Into 2 Solid Bodies?
Sep 19, 2012I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
AutoCAD Civil 3D :: Import 3D As Solid Objects Or Convert Polymesh To Solid
Jun 18, 2013I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
AutoCAD 2013 :: Converting Complex Solid Surface To Solid Model
Aug 12, 2013I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedAutoCAD 2010 :: Remove Line Inside Solid Object / Transparent Solid Objects?
Sep 16, 2013How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
AutoCAD 2013 :: Trim A 3d Solid Using Another 3d Solid As A Cutting Edge?
Aug 27, 2013Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedAutoCad 3D :: Trim Diagonal 3D Solid To Top Of Horizontal 3D Solid In Picture?
Jul 10, 2013Is there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedAutoCAD Inventor :: Make Solid / Change Parameter Of Solid
Nov 18, 2012I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
AutoCAD 2013 :: Hatching Looking Solid But Its Not A Solid Pattern
Dec 13, 2012i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedAutoCad 3D :: Convert Some Solid Bodies To Single Solid?
Dec 1, 2006How can i convert some solid bodies to a single solid.
View 8 Replies View RelatedAutoCAD Map 3D :: How To generate A Whole Lot Of Smaller Drawings From A Bigger Drawing
Feb 9, 2011I've been trying to work out how to generate a whole lot of smaller drawings from a bigger drawing, automatically through Scripting and Lisp programming. Each of these smaller drawings would be based on a rough 20 metre buffer of the property boundaries inside it. Each drawing created would preferably be the expression of the House number + Street name, which are in each property boundary parcel as object data. What I have been doing in the past is attaching and querying the required drawing one by one but this takes a while and we are about to get a whole shed load more to be done.
View 9 Replies View RelatedAutoCAD 2010 :: Make Dimension Get Bigger And Smaller As Scale Drawing?
Mar 20, 2012How to make the dimension get bigger and smaller as we “scale” the drawing?
For example, the drawing in the screenshot below is scaled by 0.5 but that didn’t affect the “size” of the dimension (height of the text, extension lines, …).
Is there a way to get the dimension line affected as we scale the drawing such that the “dimension text” and the “extension line” are increased/ decreased with the scale factor?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Photoshop :: Making Cutouts Bigger Or Smaller
Aug 8, 2007i cut out the head of a friend of mine and i want to put it over the head of someone else but the first cutout is to big and for the life of me i cant figure out how to make it smaller.
View 3 Replies View RelatedAutoCad 3D :: How To Remove Inner Solid Part From Other Solid Part
Mar 14, 2012I have to solids. They are intersecting each other, I want to remove one solid which is inside. It's a Civil 3D 2012 QUESTION.
View 5 Replies View RelatedAutoCad 3D :: Subtract Object Inside The Other It Won't Subtract
Feb 11, 2012I am in the 3d modeling view, and have extruded closed polylines. when i go to subtract the object inside the other it won't subtract the command says <Modeling Operation Error: failure in face-face intersection merging algorithm>
I don't know how to fix it.
AutoCAD .NET :: 3D Solid Bounding Box
Jan 11, 2012I would to know if there is a way with vb.net for extract the bounding box coordinates of a 3d solid
View 1 Replies View RelatedAutoCad 3D :: How To Hallow Something Out After It Is 3D Solid
Sep 29, 2011I cant figure out an efficient way to hallow something out after it is a 3d solid. Usually if I want this I will draw it in 2d knowing I will extrude one region and not the other. My problem comes with a sphere. I need to put a square hole through it. Its probably an easy 123 operation but am unfamiliar.
View 4 Replies View RelatedAutoCad 3D :: Text Cut Into Solid
Aug 27, 2012I need to cut text into a 3d solid for a logo. The sign is going to actually be hollow to illuminate the letter from the inside but I can't get the space to cut out the letters.
View 2 Replies View RelatedAutoCad 3D :: IGS Converted To DWG Is Not In Solid?
Mar 18, 2013I've opted for 3D scan of a part, it is Shoe Horn. And the scaned people sent me an .igs format and I requested them to mail me .dwg format to work with ACAD2007. Accordingly they too converted .igs to .dwg, but the converted .dwg file is unable to convert into surface or solid, once if it could be converted in surface or solid only we can do further development.
convert this into surface or solid. make this as surface or solid model, to work further with ACAD 2007.
AutoCad 3D :: How To Curve A Solid
Jul 13, 2012I'm trying to design a curve chair back, I can only make it in a flat shape, please see pic:
[URL]......
The left solid is my chair back, is it possible to make it curve like the right solid?
AutoCad 3D :: STL To Solid Converter?
Jan 15, 2013Any good STL to Autocad solid converter?
I have a old drawing that the original file got corrupted but I still have a STL model of.
AutoCad 3D :: Why Is Solid Transparent
Dec 18, 2013I have created this rendering and for some reason the metal plate which is supposed to be non-transparent is showing up with some transparency.
I'm using the diamond plate material that comes with AutoCAD. There is no transparency setting with this material so I can't set it to non-transparent. Short of trying some different materials, I was thinking there must be some way of resolving this.
AutoCAD .NET :: Best Way To Draw Solid In 3D Space?
Dec 19, 2011what is the best way to draw one solid in 3d space?
I need draw 3D object in different position, different coordinate and different inclinations.
AutoCAD 2013 :: Frame From 3D Solid
Oct 15, 2013when I use the "_list" command in AutoCad I can see the information in the attachm..
when I use "(entget (entlast))" I can't see the values for the frame (Begrenzungsrahmen)
How can I get these values for the frame (Begrenzungsrahmen) in LISP?