AutoCad 3D :: IGS Converted To DWG Is Not In Solid?
Mar 18, 2013
I've opted for 3D scan of a part, it is Shoe Horn. And the scaned people sent me an .igs format and I requested them to mail me .dwg format to work with ACAD2007. Accordingly they too converted .igs to .dwg, but the converted .dwg file is unable to convert into surface or solid, once if it could be converted in surface or solid only we can do further development.
convert this into surface or solid. make this as surface or solid model, to work further with ACAD 2007.
What is the best way to get a hole table on a converted SW file. Our Engineers use Solid works and I can easily import the file but when I try to create the hole table in the IDW file it comes up blank.
Do I need to recreate all the holes so they are native to Inventor? or I am missing a conversion setting.
Autodesk Inventor 2014 64 Bit Edition Build 170 Dell XPS 8300 Processor: Intel Core i7-2600 CPU 3.40 GHZ 16GM Memory 64 Bit Operating Windows 7
I use Canon 60D and normally shoot in mRAW. I am considering a move to DNG conversion so I did some test conversions and was amazed to find that, far from reducing the size of my mRAW files, it increased them by about 60%. I repeated the exercise with RAW files and found that this did reduce the size of the files by over 10%. In fact, i ended up with the crazy situation where the DNG files converted from mRAW were much bigger than those converted from RAW.
Below are some sample sizes based on Medium previews, Embed fast load data - YES, Embed original RAW file - NO, Compatibility Camera Raw 7.1 and later
We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
i'm using Autocad2012 now. when i use paste special in objects and give x or y insertion scale. after i do explode that object the arcs are converted in to ellipses and it come with ellipse grips. before 2012 version it won't happen. what's the change in autocad 2012? is there any variable to change?
My client needs an a3 drawing I drew converted into a PDF so he can print the PDF off to the correct scale.
I created the pdf in autocad 2012 to A3 size and a scale of 1:1. I emailed the PDF to my client who now says that the PDF is not to the correct scale when he prints it, I instructed him to select the 'actual size' option he then said it cut off the drawing at either end of the drawing. He getting very angry now. He wants to be able to open the PDF press print and it to print out to scale.
I have a 2d dxf file (attached) that i need to somehow convert into a 3d file with a material thickness of .75 inches (a piece of wood) so that the cnc can cut it it keeps giving me an error of no thickness in the machine.
I created an assembly for a customer of mine who wants a STL of a sword for a possible 3D print situation. I created the part in inches and finished it. When I converted I made sure the document units were set to inches and the export options were as well. However whenever they upload it or check it in other software it is coming up miniscule like it was drawn in mm or cm. I have gone through a number of forums and updated to the latest service pack without issue. Is the issue related to the fact its an assembly being converted to an STL? I have done it before without issue. I have attached the STL in question.
Following is possible using AutoDesk Inventor Apprentice (C++ Project)?
I want to be able to select (using the File Open dialog box) a "Step" file that I have downloaded from my supplier, then convert it to an IPT file (NOT AN ASSEMBLY!!!), automatically.
I have a configuration file (.xlsx) where I have put in Client, project number and a date (as a custom iproperty). These cells are linked to the iProperties in the IDWs. The project number and client works well, however im struggling with the date. The date is written dd.mm.yyyy in excel, and Date1 is set to date type.
When I run the rule Date1 changes type from Date to Number, and inserts a random number.
By inserting this
Date1 = DateString()
The date is converted to mm-dd-yyyy, but with wrong dates. If I write 15.10.2013 in Excel it will write the date as 08-01-2013. How to get it written lik 15.10.2013?
I need to convert a Cad file into a PDF file. Unfortunately, the PDF file won't print. The first time I had this problem was I converted it with the layers on the PDF file. What I did last time was this:
-I went under Plot-Model
-Under the Printer/plotter, I clicked DWG to PDF.pc3 and click on Properties
-Click under the Device and Document Settings tab
-Click on Custom Properties
-Click on Custom Properties buttom
-Under the DWG to PDF PRoperties table, I click on Capture all under Fon Handling
-I uncheck Include Layer information under Additonal Output Setting
-I click ok
When I begin to plot under Batch Plot, I also went and click on Publish Options, and on that table under Layer information, I click on Don't include.
For some reason, it's not printing the way as it should. I don't know what other option I have in order the print corretly.
I have to open the files which are converted from Unigraphics NX6, and run some routines, but I am not able to open the Autocad through .net api, my code is as follows
Dim Filename As String = OpenFileToConvert.FileName ' I am selecting the Dwg through OpenFileDialog Dim acDocMgr As DocumentCollection = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager acDocMgr.Open(Filename, False)
Even if I open the dwg manually and then save it again to Autocad, I am not able to achieve any success.
I created a program for conversion, which converts layers and dimensions, among other things. My program runs on AutoCad 2012, had no problem with regards to AutoCad 2012. The problem is when I try to print by opening the drawing in AutoCad 2008. The preview is blank. Does some configuration that possibly I changed or I forgot to change so that it is correct?
The drawing (before) prints in AutoCad2008. The drawing (after) doesn't print in AutoCad 2008.
I have a drawing that was drawn in MM, I re scaled the drawing by a scale factor of .03937, when I check the dimensions it appears that it is still off by around 5"
I am using AutoCAD 2011. I am taking an ellipse from CAD and converting to DXF and then placing the DXF into a CNC program (Partworks). When the program is run on the CNC router the ellipse is segmented. I have worked with the CNC program and know that the problem is in the CAD or DXF programs. If you can change the size of the segments of an ellipse when it is created or if there is something else I can try?
Everytime I try to open files created from Microstaion but saved as CAD it blue screens my computer! I have a newer laptop with Windows 7. However, an older computer in our office with Windows XP can open these files with no problem? Both computers have AutoCAD LT 2012.
I just converted a PDF file from a DWF file (from AutoCAD 2012). I also needed to print the PDF; unfortunatley, the PDF is taking forever to print.
This is what I did.
-I went under Plot-Model -Under the Printer/plotter, I clicked DWG to PDF.pc3 and click on Properties -Click under the Device and Document Settings tab -Click on Custom Properties -Click on Custom Properties buttom -Under the DWG to PDF PRoperties table, I click on Capture all under Font Handling -I uncheck Include Layer information under Additonal Output Setting -I click ok
When I begin to plot under Batch Plot, I also went and click on Publish Options, and on that table under Layer information, I click on Don't include.
For some reason, it's printing very slow. I don't know what other option I have in order the print faster.
Here's the files for you to look at just in case [URL] .....
When I copy or move an object in a file converted from Microstation to Autocad 2012 the system freezes or slows down to a crawl. If I redraw the drawing in Autocad it works fine. I have a lot of drawings converted from Microstation and I don't need to be redrawing them all.
