AutoCAD .NET :: Unable To Open File Which Is Converted From Unigraphics NX6
Dec 6, 2011
I have to open the files which are converted from Unigraphics NX6, and run some routines, but I am not able to open the Autocad through .net api, my code is as follows
Dim Filename As String = OpenFileToConvert.FileName ' I am selecting the Dwg through OpenFileDialog
Dim acDocMgr As DocumentCollection = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager
acDocMgr.Open(Filename, False)
Even if I open the dwg manually and then save it again to Autocad, I am not able to achieve any success.
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
I use Canon 60D and normally shoot in mRAW. I am considering a move to DNG conversion so I did some test conversions and was amazed to find that, far from reducing the size of my mRAW files, it increased them by about 60%. I repeated the exercise with RAW files and found that this did reduce the size of the files by over 10%. In fact, i ended up with the crazy situation where the DNG files converted from mRAW were much bigger than those converted from RAW.
Below are some sample sizes based on Medium previews, Embed fast load data - YES, Embed original RAW file - NO, Compatibility Camera Raw 7.1 and later
I have an IDW file of my assembly, which is bombing out during opening. II can create pack and go file and post it in your designated folder. File is large.
I am having trouble opening a step file. I actually opened it a couple of days ago fine but now when i try it tries to load for a few minutes then just crashes. I have tried other step files and they open fine.
The file is 260MB not sure if it will attach here.
Using Inventor 2009. For some reason (all of a sudden) it will not open a step file. When I go to search for the file I would always use the file drop down an there would be a lengthy list of options. For some reason now it will only list the basic native formats... part, assembly etc. How I can get these back?
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
Can I export from IV 2013 directly to NX? I've seen several documents indicating there is some degree of "interoperability," but I don't see NX/UG/.prt as an export option. So, is NX import only?
Product Design Suite Ultimate 2014 Windows 7 Professional x64 Intel i7-3770k @ 4.5GHz 32GB DDR3-2400 RAM GeForce GTX 670 4GB
I'm having issues with opening some Unigraphics/NX8 files. The "drawing" is converted just to a solid model. Is there a specific translator I should be looking at from Autodesk
I open a .NEF in Bridge, go into ACR and open the file as a Smart Object in Photoshop. Double-click the layer icon and I'm back in ACR, just like all the demos and seminars I've watched. But, take the SAME .NEF in Bridge and open it as a standard image in Photoshop, then CONVERT it to a smart object, double-click the layer icon and all I get is a .psd and NOT jump into ACR. It does exactly the same thing with a .dng file And from Lightroom OR ACR...
I found an entry from a discussion (not in here, I couldn't find anything about this in here) about CS3 (yes 3), where a user had this problem and was told it's because the original image was opened as a rasterized image, NOT as a Smart Object from ACR... Which isn't making sense to me 'cause who cares what it was way back when, it's NOW a Smart Object and should be treated like one no matter HOW it got there...
Is there some preference or setting or something I need to change in Photoshop so this will work as expected is is there really some restriction about exactly HOW the Smart Object got created? And if so, is there some paragraph is big, bold letters in the documentation that makes it really clear to the uninformed that you MUST open it as a Smart Object or it won't work?
And yes, I KNOW that in ACR I can set it so it defaults to opening as a Smart Object, but like many other PS users I normally use Lightroom and I haven't seen any such default. Which means it's REALLY easy to forget to go down to the Open as Smart Object and instead just hit Open in Photoshop...
A CSV (comma separated value) file was converted into a topo CAD file. But when I try to xref or insert it into my base drawing, it is showing up really small. The scale is obviously wrong.
I have a 2d dxf file (attached) that i need to somehow convert into a 3d file with a material thickness of .75 inches (a piece of wood) so that the cnc can cut it it keeps giving me an error of no thickness in the machine.
I have a new mini recorder which records 720x480 at 29.897 fps. Video studio says Unable to open file *****.avi for all of the files. They play perfectly well with MS media player, VCL, Quicktime etc so what is wrong ?
I opened a previously saved project and all the AVI files have blank spaces. When I click properties it says the file is unreadable. When I try to open the file it says unable to open file, catastrophic failure.
These are the same files that I used to edit and render a video a few months ago, and I was able to successfully open the same file in Windows Media Player. I am using VSX4 on a Windows 7 laptop. I'm not sure what updates are installed.
The video file is DV AVI file (720 x 480, 28854 kbps data rate, 298788 kbps total bitrate, and 29 FPS).
At the moment, the only file format that I can import on the edit tab is *.wmv. There should be no issue importing *.avi or *.mp4 or any other format for that matter, but it fails to open the files. I keep getting the same "unable to open the file 17101:7:1" error for seemingly no reason. Everyone says this software's functionality is wonderful, but if it won't even let you bring in normal files it's looking less and less useful all the time.
With the AutoCAD Revit 2014 I am unable to open DWG file. It gives me a failed to open error. I have attached screen shot below. We did download DWG TruView 2014.
Following is possible using AutoDesk Inventor Apprentice (C++ Project)?
I want to be able to select (using the File Open dialog box) a "Step" file that I have downloaded from my supplier, then convert it to an IPT file (NOT AN ASSEMBLY!!!), automatically.
There's a specific file I can't open. I've worked on it previously, but a week later, and it won't open. All of my other PS CS6 files are intact, and will open immediately. However, this one file takes so long to load (2+ hours) that I end up restarting my computer in order to work on all of my other things. The size isn't the issue, either; it's only 70 megabytes, as opposed to some of my more heavy-duty files that run upwards 200 megabytes.
I'm thinking about opening it on another computer to see what happens, but I'm concerned about the fact that I can't open this particular file. I'm not sure if it's corrupted, based on the fact that it just sits on my computer and just tells me that it's loading.
Is there something I can do to make it open, or modify the file? I've already tried defragging my computer and other things, and I'm at a loss here. I really don't want to start working on this from scratch .
On my current project I get the error message "Software problem" when attempting to open the project file. This problem began last night and affects the project file and all automatic backup files of my current project. It does not seem to be affecting other projects.
Start up Gimp and get an error message as follows:
Unable to open swap file. GIMP has run out of memory and cannot use the swap file. Some parts of your images may be corrupted. Try to save your work using different filenames, restart GIMP and check the location of the swap directory in your Preferences.
When I check preferences, the path to the swap file is not correct. My path is user to Application to Application Support to Library to Gimp.
I cannot open a .dng file in my ps elements 6.0. I am running win xp pro
I can see the RAW .dng files in the 'open' dialog box, but when I go to "open" one, I get the following error. Online help say I "should" be able to do this.
Format Import Export Bitmap (.bmp, .dib, .rle) x x Camera Raw(1) (.tif, .crw, .nef, .raf, .orf, .mrw, .dcr, .mos, .raw, .pef, .srf, .dng, .x3f, .cr2, .erf, .sr2, .kdc, .mfw, .mef, .arw) I get an error message "could not complete your request because of a program error"
My camera is a Casio EX-FH100, shoot 10mp files in raw.
Everytime I try to open a CR2 file i get an error saying
"could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional info."
I am shooting with a Canon 6D and Canon 60D so I know the camera models are supported. I have already updated to the 7.1 version of Camera Raw.
Every time I try to render in AE I get this error message " after effects unable to open file 1610153459" I'm stuck until I find a solution. I've tried some of the solutions I've found on the web, such as using a different drive and changing permissions on drive. While the problem is the same, most of the solutions are for a PC. I have a Mac.
I've started getting this error when attempting to open QT wrapped DVCPro HD in Premiere Pro CC (7.2.1) windows OS.
I have the latest version of QT installed and I can open and play the files successfully on the same machine in QT. The files are located on a network share but I have tried copying them locally and I get the same issue.
I've tried removing, reinstalling, updating QT, rebooting the machine, holding down shift when launching Premiere but none of these things have made a difference.
I can open the same files on a different machine using the same version of Premiere (without QT installed - different OS though, Windows 8) and up until fairly recently, I could open these files on the machine where it's not working too.
The really strange thing (as far as I am concerned at least) is that I can open up the project in AME and render it out to DVCPro HD on the same machine, without a problem but for some reason Premiere doesn't want to handle the files properly.
I need to convert a Cad file into a PDF file. Unfortunately, the PDF file won't print. The first time I had this problem was I converted it with the layers on the PDF file. What I did last time was this:
-I went under Plot-Model
-Under the Printer/plotter, I clicked DWG to PDF.pc3 and click on Properties
-Click under the Device and Document Settings tab
-Click on Custom Properties
-Click on Custom Properties buttom
-Under the DWG to PDF PRoperties table, I click on Capture all under Fon Handling
-I uncheck Include Layer information under Additonal Output Setting
-I click ok
When I begin to plot under Batch Plot, I also went and click on Publish Options, and on that table under Layer information, I click on Don't include.
For some reason, it's not printing the way as it should. I don't know what other option I have in order the print corretly.
Installed cs6 which seemed to be working just fine until I attempted to open a CR2 file from a canon 5D Mark III, will not open, checked for RAW updates.
I installed Photoshop CS6 64-bit on Windows 7 SP1 64-bit.When it starts, these two messages are displayed: Unable to open a virtual memory file because the file is locked. You do not have permission or the file is being used by another program.
Unable to initialize Photoshop because the file is locked. You do not have permission or the file is being used by another program.
In VideoStudio X4 (SP1), I am trying to import an edited (VSX4) project into the library in order to use parts of it in a different project. This is something I have done successfully before but the last couple of times I have tried I get the message: “Unable to open file. File format mismatch”. (1081:1:3) There is no problem opening up the project in the normal way it is only when I try and import it into the library. I have compared the properties of these files with the successfully imported files and, to me, they look identical. They were all captured from video in the same way,
