A CSV (comma separated value) file was converted into a topo CAD file. But when I try to xref or insert it into my base drawing, it is showing up really small. The scale is obviously wrong.
View 4 RepliesI use Canon 60D and normally shoot in mRAW. I am considering a move to DNG conversion so I did some test conversions and was amazed to find that, far from reducing the size of my mRAW files, it increased them by about 60%. I repeated the exercise with RAW files and found that this did reduce the size of the files by over 10%. In fact, i ended up with the crazy situation where the DNG files converted from mRAW were much bigger than those converted from RAW.
Below are some sample sizes based on Medium previews, Embed fast load data - YES, Embed original RAW file - NO, Compatibility Camera Raw 7.1 and later
Before : mRAW 17Mb mRAW 12Mb
After: DNG 28.5Mb DNG 21Mb
Before: RAW 23Mb RAW 22Mb
After: DNG 20Mb DNG 19Mb
If I went for Full Preview, the DNG sizes rose by about 2 Mb
why the mRAW conversion is so inefficient?
I am still not entirely sure whether to adopt DNG but, if i do, it looks like I certainly won't be using mRAW as the source.
I have a 2d dxf file (attached) that i need to somehow convert into a 3d file with a material thickness of .75 inches (a piece of wood) so that the cnc can cut it it keeps giving me an error of no thickness in the machine.
View 4 Replies View RelatedFollowing is possible using AutoDesk Inventor Apprentice (C++ Project)?
I want to be able to select (using the File Open dialog box) a "Step" file that I have downloaded from my supplier, then convert it to an IPT file (NOT AN ASSEMBLY!!!), automatically.
I need to convert a Cad file into a PDF file. Unfortunately, the PDF file won't print. The first time I had this problem was I converted it with the layers on the PDF file. What I did last time was this:
-I went under Plot-Model
-Under the Printer/plotter, I clicked DWG to PDF.pc3 and click on Properties
-Click under the Device and Document Settings tab
-Click on Custom Properties
-Click on Custom Properties buttom
-Under the DWG to PDF PRoperties table, I click on Capture all under Fon Handling
-I uncheck Include Layer information under Additonal Output Setting
-I click ok
When I begin to plot under Batch Plot, I also went and click on Publish Options, and on that table under Layer information, I click on Don't include.
For some reason, it's not printing the way as it should. I don't know what other option I have in order the print corretly.
I have to open the files which are converted from Unigraphics NX6, and run some routines, but I am not able to open the Autocad through .net api, my code is as follows
Dim Filename As String = OpenFileToConvert.FileName ' I am selecting the Dwg through OpenFileDialog
Dim acDocMgr As DocumentCollection = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager
acDocMgr.Open(Filename, False)
Even if I open the dwg manually and then save it again to Autocad, I am not able to achieve any success.
What is the best way to get a hole table on a converted SW file. Our Engineers use Solid works and I can easily import the file but when I try to create the hole table in the IDW file it comes up blank.
Do I need to recreate all the holes so they are native to Inventor? or I am missing a conversion setting.
Autodesk Inventor 2014 64 Bit Edition Build 170
Dell XPS 8300
Processor: Intel Core i7-2600 CPU 3.40 GHZ
16GM Memory
64 Bit Operating
Windows 7
When I copy or move an object in a file converted from Microstation to Autocad 2012 the system freezes or slows down to a crawl. If I redraw the drawing in Autocad it works fine. I have a lot of drawings converted from Microstation and I don't need to be redrawing them all.
View 1 Replies View RelatedI have posted before about not being able to open X5 and receiving a "Coreldraw has encountered a problem and needs to close." error message upon launch. I have not been able to resolve this issue.
I have to work on a graphic file and need it converted top X3 (this version opens) as it was created in X5.
I am working on a x5 and file size seems to be very less approx 553kb when saved but when made a conversion to 12 version it is increasing to 24mb... how may sought this out by keeping the file size low..
Also i wonder what made the file size to increase so much.i converted all fonts to curves too.. decreased the resolution and tried but nothing seemed to decrease the file size.
A .cdr file from CDX6 when "Saved as" .cmx format can be opened in early version of CD?
Why .cdr when converted to .cmx format file is smaller (in KB)?
What are main differences cdr/cmx?
I'm using Autocad Civil3D 2011, Version 3. Just yesterday I noticed that the file date shown in Autocad's open file dialog box shows an earlier time than Windows Explorer, which shows the file date and time correctly. When I enter the "time" command on the autocad command line, the correct time is shown for the "last updated" time.
For example:
The Autocad open file dialog box shows the file having a time/date of 4/23/2013 3:54 PM
Windows Explorer shows the file having a time/date of 4/23/2013 4:10 PM
"TIME" command at autocad prompt returns the following:
Current time: Wednesday, April 24, 2013 3:55:35:454 PM
Times for this drawing:
Created: Thursday, March 27, 2008 5:49:57:104 PM
Last updated: Tuesday, April 23, 2013 4:10:56:299 PM
Total editing time: 17 days 15:31:26:967
Elapsed timer (on): 17 days 15:31:26:967
Next automatic save in: 0 days 00:09:58:237
I rebooted and restarted autocad, and resaved my file with the same results (although with different times-but again the autocad open file dialog box showed an incorrect, earlier time). I have never had this problem before, and it is driving me crazy as I usually sort my files by date to assure that I am working with the latest file.
How to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies View RelatedI have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
View 5 Replies View Relatedi have any problem about export point from dwg to *.txt file.i have point file *.dwg from my friend,,but i confused why that point can't export, show warning "No point were transferred from the source" point is in layer 0...I attach the dwg file.
View 5 Replies View RelatedCivil 3D 2013.One of the problems my team has is that we have a number of remote offices that all work on the same drawings. To ensure integrity of the drawings, we use a Wide Area file replication and locking service to ensure the files do not become out of sync and corrupted between offices.
AutoDesk seems to open and save files and their subordinate xrefs serially in a single thread instead of in a multi-threaded manner. Because of this there is a Huge time impact on just opening and saving files at remote sites as a result of Civil 3D having to wait for the home office file lock check on each and every file before opening the next file.
We have 100Mbit down / 20Mbit up transmission links at both sites dedicated to the file replication, with Gbit backbone in both offices.
note that the remote site has a full copy of all files in its replicated share. These local files are what Civil 3D is opening. No Files are being transferred during file open unless a remote change has just occurred (proven through replication logs).
When the drawing file is opened for editing, a file lock check is performed and Windows waits for the response to ensure it can be opened for editing before telling Civil 3D. When Civil 3D has this file open, it has a list of all the xrefs for this file. Civil 3D then seems to open each file in sequence.
This is a problem when a large latency is introduced through our 3rd party Wide area file system by a remote site file lock check.
This is not AutoDesk's fault but the compounding of the two system's operational behaviours, causing a Very long wait on file open, Save, PaperSpace operations (30 minutes for large drawings).
I would like to see a multithreaded (threadpool) file open occur against the entire list of xrefs (during save as well). Then recursively executed for all subordinate xrefs of those files until the operation is complete.
As long as a file list is maintained during the operation and updated as each file operation completes (which obviously it is) in the primary thread, this should not cause any problem. All dependancies can be opened in sequence once the initial file operations are complete and when a particular file in the list is required but not open yet, it's priority can be raised in the threadpool.
I'll go and open a file and I'll rename a drawing file while in that dialog box. I will then open the drawing I renamed or any other drawing and work fine for awhile. I will usually crash within that session at some point.
View 2 Replies View RelatedI have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedHow come my 16 bits RAW file is only 10 bits when converted to DNG? To me that sound like a loss in quality and possible post processing issues. Do I need to worry?
View 2 Replies View RelatedI have been able to MAPEXPORT points, polylines & text out in a SHP file for our GIS department. They are asking for a DWG file with my manhole infromation. when I sent the drawing file they said there was nothing the file. It had layers but no plines points or text. What I might be missing in my drawing for ESRI to see these?
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
I've recently noticed that my multiline text boxes in old drawings have been splitting themselves into multiple multiline text boxes. They aren't exploding into single line text because it won't let me use the convert command to turn them into multiline because they are already multiline.
I know the dimassoc command can be set to a certain value to cause all dimensions to explode but is there some kind of command that could have change itself and is causing this problem?
I want to create a new custom linetype and edit the acad.lin in Notepad. Instead of saving over the original file, I did a save as, but Notepad can only save it as .txt file, not .lin. Whenever I go to load the new linetype file (which is in .txt), it doesn't recognize it, and only shows the .lin files. How do I save .lin file in Notepad?
View 5 Replies View RelatedHow to export shp file to txt,,,i want to x,y,z format from shp file.,,
View 6 Replies View RelatedI need to insert a 3d component into our AutoCAD drawing, and the vendor can only supply this as a .stp (step) file. Need to convert the attached .stp file to .dwg.
The file has been zipped because I am unable to upload a file with the .stp extension.
I have a tds raw file that I would like I would like to import into a new c3d drawing. I've tried and tried to convert it using the program inside of c3d, but to no avail.
View 6 Replies View RelatedI am trying to import a DGM file into Civil 3D.I do this by adding a DGM file to a surface through prospector>surfaces>surface>definition>dgm files,
however the problem I am having is that it defaults to DEM file types which through research I have found out is our american counterparts version of the DGM.
I have found some great LiDAR information but it is in a compressed LAS file so the extension is LAZ. How to decompress these files so they can be used. The point cloud will only accept the las format.
View 1 Replies View RelatedI have a custom .shx file for linetypes but I am not sure how to get Autocad to recognize it. What steps do I have to take to use this file in Autocad? I have searched for the ACAD.SHX file but could not find it.
View 2 Replies View Relatedi would like to know how can I import a *.rrd file into autocad civil 3d 2014....or how can I convert it into a geotiff file.
View 1 Replies View RelatedHow to open a .tin? I tried to create a surface from a TIN as one way but it is looking for .pnt. as well.
View 8 Replies View RelatedAfter analyzing a storm system in SSA or Storm Sewers I’m exporting it to a .stm file. When importing to CAD it recognizes the existing pipe network and asks to update it which works but it adds two horizontal purple lines in the profile which are attached to one of the pipes in the profile. If you erase the purple lines it erases the pipe with it.
Things I tried already with no success:
-Erase profile and re-create it
-Erase alignment and re-create it
-Erase all pipes before import (so it would import as new, not update)
-Try LandXML for export/import (this wouldn’t update pipes, it just brought in a whole new network and messed up all the styles/parts)
Here is what it looks like: