AutoCAD Civil 3D :: LAS File Format
Dec 17, 2013
I have found some great LiDAR information but it is in a compressed LAS file so the extension is LAZ. How to decompress these files so they can be used. The point cloud will only accept the las format.
View 1 Replies
ADVERTISEMENT
May 14, 2013
How can I know that the AGS file is complied the AGS 3.1. or 4? I have a AGS file that it can't to be imported to Civil 3D 2014 - Geotechnical Modules. Is there any tool for doing clarification?
The error is "Pick list item 'FILL' under header GEOL_LEG does not exist in the ABBR table" ...etc...
View 3 Replies
View Related
Dec 12, 2013
I've been sent an AGS 3.1 file which I'm trying to import to Civil 3D using the Geotechnical module, but keep running up against an error which suggests the date format in the AGS file is incorrect. From what I can see the format should be DD/MM/YYYY, and this is correct in the file, but Geotechnics still won't recognise it.
Is there a different date format I should be using, or is there a way to force the tool to recognise the format in the file?
View 7 Replies
View Related
May 24, 2013
Is there a way to re-order the point file format listing for points on the settings tab? I have tried everything and it will not change the order of the listing.
View 3 Replies
View Related
Aug 8, 2012
I have an aerial image in TIFF format.Can I get DEM information from this format? If yes, what should I do?
View 3 Replies
View Related
Jun 6, 2012
i made a survey, about 2000 points with my TSC3R6. I exported my CSV file to a PNEZD file with comma seperated. When i try ti import the file (CSV then i made a .txt), C3D tells me "no point file format match found". Then I opened the txt file, searched for any error that would not let me import my points. The only thing i have found would be the description of my points that sometimes had a space between 2 words (ex: bt balast and ht balast) so i changed it to bt-balast and ht-balast. i looked further and didnt found anything else. heres a sample of my txt file:
11251,5038721.804,370118.600,52.877,69
11252,5038722.437,370118.327,52.980,82
11253,5038725.381,370117.058,54.235,81
11254,5038725.967,370117.395,54.325,bt-balast
11255,5038727.637,370116.899,54.860,ht-balast
11256,5038728.983,370116.602,54.857,balast
11257,5038730.043,370116.150,54.839,ht-balast
11258,5038731.524,370115.635,54.345,bt-balast
11259,5038731.763,370115.674,54.308,81
11260,5038733.529,370114.961,53.606,82
11261,5038734.460,370114.525,53.505,350
Now i have to draw something but i cant even find why importing points fails in C3D.
some usefull informations maybe:
windows 7 32bits SP1
autocad civil 3d 2013 (not yet activated, next week)
View 4 Replies
View Related
Jun 17, 2009
What is the correct format for the .csv file to be imported into QTO manager?
The attached file loads into the QTO manager, but I cannot get the "units" to behave.
Every item I assign to an line or pline gives me a count instead of a length.
Also, how do you change the precision (decimal places) of the report.Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
View 9 Replies
View Related
Feb 8, 2012
Is that possible to convert surfaces from Civil 3D 2010 file into Navisworks format & PDS framework plus?
Or Is that possible to view in Navisworks?
View 7 Replies
View Related
Feb 28, 2013
I am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
View 6 Replies
View Related
Jun 27, 2011
I have just installed C3D 2012 and when I show the menu bar, the only choice is Express which used to be the last tool in previous versions. What happened to File - Edit - View - Insert - Format, etc in the menu bar? I need to access them.
View 4 Replies
View Related
Jun 18, 2012
how I can go about automatic creation of figures and existing alignment (i.e. Centerline and edges) using csv/txt file data format. Currently I have to snap each line to create Centerline, edge, figures etc. a headache of work! I am using Autocad civil 3D 2012.
View 3 Replies
View Related
Sep 25, 2013
What is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
View 9 Replies
View Related
Nov 7, 2013
Is it possible, in AutoLISP, to code something that will save the current file (whatever it may be, assume ..dwg or .dxf, into R2000 .dxf?
View 9 Replies
View Related
Oct 30, 2013
I want to implement the following Key SAN10L....I have tried many codes to accomplish this: SAN*L, SAN##L, SAN?L. The 10 in the code represents a number from 1-99. The "L" is alphabetic. I want to use the survey database to create linework. I have everything setup, but cant get the code to work to generate the linework.
View 4 Replies
View Related
Nov 22, 2010
I'm trying to export a C3D 2010 drawing to Autocad 2007 format, and it's failing with the following error: So what does that mean? After all, I'm EXPORTING TO AUTOCAD FORMAT, which I thought would convert things to "plain AutoCAD format".
View 9 Replies
View Related
May 25, 2013
Have some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported." Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
View 10 Replies
View Related
Nov 14, 2013
I've got a catalog that work fine in LR4.4, but when I try to upgrade them to LR5 I get the error, "Lightroom couldn't update the format of its catalog file because the file appears to be damaged." The catalogs aren't damaged as they work perfectly in LR4.4. I urgently need to update them to a new mac with LR5.
View 1 Replies
View Related
May 30, 2012
I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
View 8 Replies
View Related
Nov 19, 2012
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies
View Related
Apr 21, 2013
When trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
View 1 Replies
View Related
Dec 5, 2012
I create short videos using the PS frame animation panel. I used to be able to FILE-export-render video- and choose MPEG-4 Video in the settings panel which would render my file into a small .mov file. Now in CS6 the new render video panel does not have that option. I tried the QT options in the export window and my file is hugh! The H.264 option gives me an .mp4. I put the .mp4 into my web page via Dreamweaver and my video does not play when uploaded into the sever. The video plays fine in Dreamweaver before I upload to the server. After I upload to the server I just get a Q and no video on my web page. If I render the same file in CS5 I am able to view it in my web page. ADOBE WHY DID YOU CHANGE YOUR EXPORT VIDEO RENDERING OPTIONS in CS6?
View 2 Replies
View Related
Oct 2, 2012
I have a 2d dxf file (attached) that i need to somehow convert into a 3d file with a material thickness of .75 inches (a piece of wood) so that the cnc can cut it it keeps giving me an error of no thickness in the machine.
View 4 Replies
View Related
Sep 28, 2011
I am wondering if there is a way to put the old save method back into the new gimp 2.7.3. I would like to be able to export to a new file format and automatically be using that file instead of the original file that I have just opened. If there is a plugin like this that would be great.
View 2 Replies
View Related
Jul 29, 2013
I have recently received several aerial images with a .iTIFF file extension. how to insert an iTIFF into a drawing and what the best way to do this. I can just delete the 'i' out of the extension and it works fine as a TIFF but the coordinate projection is off.
View 2 Replies
View Related
Feb 21, 2012
Is there a way to change a RAW description such as EC12 +, or EC11 -, to say SWP12 +, SWP11 -
I'm not having much luck using the parameter settings. 1$
I tried Code = EC*, format=SWP1$
That didn't work... I got literally SWP1$ instead of SWP12 +
Is it a space thing? Do I have to rename all the descriptions to have a space before the parameter?
i.e. EC 12 +
I'm hoping this isn't the case and some form of wildcard can be use.
View 4 Replies
View Related
Apr 3, 2012
I want the stationing information in display, labels etc to be in the format: x+xxx.xxx. What I get by default is XX+XX.XXX. How can I my desired label format style and lock it?
View 1 Replies
View Related
Sep 28, 2013
I made with AutoCad particular drawing that i need to convert to SDR format .
View 3 Replies
View Related
Aug 29, 2013
I'm trying to find a proper workflow how to get my .ipt parts to right file format that fits to our nesting program. Nesting program is a quite old and doesn't support files newer than Autocad 2000 .dwg/.dxf.
Our current workflow is quite slow and painful, because we have to clean drawings manually and it breaks the link between drawing and 3D model:
1. Design parts in Inventor (.ipt)
2. Create drawing file in Inventor (.idw/.dwg)
3. Save a copy from drawing file to Autocad .dwg
4. Open the copy of drawing in Autocad, remove splines etc. and save in older Autocad 2000 .dwg format
5. Import to Nesting program
How should I do this that it won't break the link between .dwg file and 3D model and those drawings won't have any splines?
View 9 Replies
View Related
Mar 6, 2013
I am getting this popup error when trying to open a .gif file:
"Could not complete your request because the file-format module cannot parse the file."
This comes up every time I try to open a .gif file. Even if I make a .gif file (like the image included in this post), save it and then try to open it again, I get the same error. I tried reinstalling CS4, but the error is still there. I have also done the reset on start-up and nothing. Some have suggested that I open it in (Windows XP Pro) MS Paint and then save it again. Did it and this does NOT work for me, either.
View 3 Replies
View Related
Sep 26, 2013
I am trying to open a image to edit in Photoshop CC. I am getting the following message:- Could not place the document ‘arrow_right_alt1-512’ because file-format module cannot not parse the file. I make this upper cover but when i put any image in the backgroud layer it shows me that Error
Image no.1
Image no.2
Image no.3
Image no.4
View 4 Replies
View Related
Aug 16, 2013
I have used an exceptionally good website called [URL]...... for a number of years with no problems. I have just downloaded from them a .mp3 file lasting 5 minutes but when I come to load it into my project , I get an error message saying "File format mismatch". The only difference that I see between this and all the previous files I have downloaded from them is that this one has a bitrate of 320kbps compared to the previous ones of 130-190kbps.
View 6 Replies
View Related