AutoCAD Civil 3D :: Correct Format For CSV File To Be Imported Into QTO Manager?
Jun 17, 2009
What is the correct format for the .csv file to be imported into QTO manager?
The attached file loads into the QTO manager, but I cannot get the "units" to behave.
Every item I assign to an line or pline gives me a count instead of a length.
Also, how do you change the precision (decimal places) of the report.Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
View 9 Replies
ADVERTISEMENT
Apr 12, 2012
I have an interesting problem. I have imported a shp file from a state agency. This file contains contours for an area. When I tag the pline, it shows a "zero" elevation, but shows a numeric elevation within the DXF_ELEV feature.I am needing to convert these to pline with elevation to work on in autocad. how to get polyline w/ elevations to export from c3d?
View 9 Replies
View Related
Jul 19, 2013
I have been working on a site layout, and the engineers changed the final topo. I have imported a DEM file, and changes all of my pipe networks to reference this final grade. But all of the pipes I have placed do not reference this surface, but all of the networks do. Other than changing all of the pipes individually (which is what I have started to do through Pipe Properties) is there a quicker and easier way to have all of the pipes reference my new surface, and also is there a quicker way to apply my rules to this new surface other than the same way (through Pipe Properties changing my rules, and right click to apply rules).
View 3 Replies
View Related
Mar 7, 2013
Previously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?
View 3 Replies
View Related
Dec 17, 2013
I have found some great LiDAR information but it is in a compressed LAS file so the extension is LAZ. How to decompress these files so they can be used. The point cloud will only accept the las format.
View 1 Replies
View Related
May 14, 2013
How can I know that the AGS file is complied the AGS 3.1. or 4? I have a AGS file that it can't to be imported to Civil 3D 2014 - Geotechnical Modules. Is there any tool for doing clarification?
The error is "Pick list item 'FILL' under header GEOL_LEG does not exist in the ABBR table" ...etc...
View 3 Replies
View Related
Dec 12, 2013
I've been sent an AGS 3.1 file which I'm trying to import to Civil 3D using the Geotechnical module, but keep running up against an error which suggests the date format in the AGS file is incorrect. From what I can see the format should be DD/MM/YYYY, and this is correct in the file, but Geotechnics still won't recognise it.
Is there a different date format I should be using, or is there a way to force the tool to recognise the format in the file?
View 7 Replies
View Related
May 24, 2013
Is there a way to re-order the point file format listing for points on the settings tab? I have tried everything and it will not change the order of the listing.
View 3 Replies
View Related
Aug 8, 2012
I have an aerial image in TIFF format.Can I get DEM information from this format? If yes, what should I do?
View 3 Replies
View Related
Jun 6, 2012
i made a survey, about 2000 points with my TSC3R6. I exported my CSV file to a PNEZD file with comma seperated. When i try ti import the file (CSV then i made a .txt), C3D tells me "no point file format match found". Then I opened the txt file, searched for any error that would not let me import my points. The only thing i have found would be the description of my points that sometimes had a space between 2 words (ex: bt balast and ht balast) so i changed it to bt-balast and ht-balast. i looked further and didnt found anything else. heres a sample of my txt file:
11251,5038721.804,370118.600,52.877,69
11252,5038722.437,370118.327,52.980,82
11253,5038725.381,370117.058,54.235,81
11254,5038725.967,370117.395,54.325,bt-balast
11255,5038727.637,370116.899,54.860,ht-balast
11256,5038728.983,370116.602,54.857,balast
11257,5038730.043,370116.150,54.839,ht-balast
11258,5038731.524,370115.635,54.345,bt-balast
11259,5038731.763,370115.674,54.308,81
11260,5038733.529,370114.961,53.606,82
11261,5038734.460,370114.525,53.505,350
Now i have to draw something but i cant even find why importing points fails in C3D.
some usefull informations maybe:
windows 7 32bits SP1
autocad civil 3d 2013 (not yet activated, next week)
View 4 Replies
View Related
Feb 8, 2012
Is that possible to convert surfaces from Civil 3D 2010 file into Navisworks format & PDS framework plus?
Or Is that possible to view in Navisworks?
View 7 Replies
View Related
Oct 7, 2011
In some cases (especially with files imported from dxf format), the tables of print style are only with .stb extension but I need to use the Monochrome.ctb. How Can I load this table if it doesn't appear in the list?
View 1 Replies
View Related
Oct 19, 2013
I just noticed yesterday that when I have RAW (DNG) files in my LR5.2 library, I can select the correct lens profile to apply. When I take three of those files and merge them together in Photomatix Pro they come back as a single TIFF file. Now LR only has one lens profile available, and it is the wrong one.
This is happening with my Sony NEX-7 and Tamron 18-200mm f/3.5-6.3 XR DI-III VC. With the RAW files, I have a list of Tamron lenses from which to choose, and the correct one is available. For the merged TIFF file, however, only a single Tamron lens is available for selection, and it is not the lens I used.
View 4 Replies
View Related
Feb 28, 2013
I am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
View 6 Replies
View Related
Jun 27, 2011
I have just installed C3D 2012 and when I show the menu bar, the only choice is Express which used to be the last tool in previous versions. What happened to File - Edit - View - Insert - Format, etc in the menu bar? I need to access them.
View 4 Replies
View Related
Feb 27, 2012
I loaded Photoshop 10 and then imported/moved my catalogs from Photoshop 6. They are all scrambled - do not honor import dates/sequence and have dates and file names all intermingled. It is really a screwed up mess. I haven't found a way to unscrew it! - Or tell me I get to live with it!
View 5 Replies
View Related
Jun 18, 2012
how I can go about automatic creation of figures and existing alignment (i.e. Centerline and edges) using csv/txt file data format. Currently I have to snap each line to create Centerline, edge, figures etc. a headache of work! I am using Autocad civil 3D 2012.
View 3 Replies
View Related
Dec 4, 2012
I have footage in the following format which I'd like to upload to Vimeo (it was shot on a basic home camcorder some years ago). What would be the best format? I have VideoStudio Pro X5 trial version.
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 4:3, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
The Share - Upload to Web - Vimeo MPEG-4 4:3 option gives you:
MPEG-4 Files
24 bits, 640 x 480, 25 fps
Frame-based
H.264 Baseline Profile Video: 2500 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
Is this OK? Vimeo said they pillarbox all SD videos (ie. smaller than 1280x720) in order to fit them into their standard player so should I do the Vimeo HD 16:9 option for instance?
It gives you:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
View 8 Replies
View Related
Sep 25, 2013
What is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
View 9 Replies
View Related
May 22, 2013
Is there any way one can convert an imported photo in Jpeg or Bmp or Tiff or any other format into lines in a drawing?
View 7 Replies
View Related
Jun 15, 2011
what is the best format to use for my finished video project. The video format is currently MP4. I have imported the video to add and edit the audio and video portions of these videos. I would now like to export the finished project so that I can both embed the videos with controller on my website as well as put them in a zip file for potential clients so that the can download the set of videos then play them back with controller included with video. I would also like the format that I use to prevent user edits or tampering. If so what format is the best to use for the requirements presented?
View 7 Replies
View Related
Jan 15, 2014
I have saved my photos in RAW format and imported them into Lightroom. I have then made changes to them and exported them from Lightroom as JPEG files. However, when I go to a printing kiosk and get the photos printed, they are all darker than what they displayed in Lightroom. What do I need to do to be able to print accepable photos?
View 3 Replies
View Related
Oct 29, 2011
I have all my pictures shooted in my Lightroom. My first APN shooted only in jpg files. After, with a new APN, I don't know realy why, I shooted in raw+jpg. And now, I download only raw files. Is it possible to delete jpeg files which exists in double of raw files?
View 4 Replies
View Related
Nov 7, 2013
Is it possible, in AutoLISP, to code something that will save the current file (whatever it may be, assume ..dwg or .dxf, into R2000 .dxf?
View 9 Replies
View Related
Mar 4, 2013
I am having an issue inserting a detail call out "block". The blocks were created to be annotative however, when I am inserting them into my paperspace at 1" = 30' it shrinks up the block. In model space it shows at the correct size.
View 2 Replies
View Related
Feb 17, 2013
I have a drawing and want to create an alignment in Civil 3D. I have my line, which is 987.83' long. However, when I create the alignment, the stationing runs from 0+00 to 118+53.92 instead of 0+00 to 9+87.83. This is a factor of 12. The properties tab reports a length of 11853.92 for the line as well. However, when I dimension the line, it displays the correct dimension that I want in feet.
View 1 Replies
View Related
Feb 7, 2013
I am working on creating a set of plans and have a couple of note pages that are generic and will not need to be change. I am creating a template with layers, layout tabs, styles, etc. I am trying to put these notes straight into a layout tab just simply by pasting them in there. The issue I am having is with the hatching on a couple of objects, the hatches appear correctly right off. When I save the drawing and reopen the hatches are a solid block, regen does not fix this. I can however explode the hatch and then undo the explode command and it appears correctly. Is there a way I can make the hatches appear correct everytime?
View 3 Replies
View Related
Dec 11, 2012
I have 2 feature lines, one is at elevation 132 (TOB), and the other at 123 (TOE). I inserted elevation points at an increment of every 3 ft., which should make a smooth arc of contours around the pond.If the issue was resolved by this method, please click on "Accept As Solution".
View 9 Replies
View Related
Jul 16, 2013
What is the correct way to remove SE from any given curve on an alignment? I have calculated and the angency does not want SE on a particular curve.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 2 Replies
View Related
Sep 20, 2012
I made a cylinder which is in the attachment. When I flat pattern produce its dxf file, I am not able to get correct geometries. When I zoom into the dxf file, I see that the inner hexagon and circles project irregular shapes and are not concentric.
View 9 Replies
View Related
Jul 1, 2011
I have been happily x-reffing for years but recently my x-refs will randomly disappear when I reload them. I have checked the file name seems to be the same the paths match where the file is (on a network drive if that matters.) I defenitely haven't deleted the x-ref on the model space.
View 4 Replies
View Related
