AutoCAD Civil 3D :: Date Format In The AGS File Is Incorrect
Dec 12, 2013
I've been sent an AGS 3.1 file which I'm trying to import to Civil 3D using the Geotechnical module, but keep running up against an error which suggests the date format in the AGS file is incorrect. From what I can see the format should be DD/MM/YYYY, and this is correct in the file, but Geotechnics still won't recognise it.
Is there a different date format I should be using, or is there a way to force the tool to recognise the format in the file?
I like to organize my photos by date. When I import my photos through lightroom 5, I specify in the metadata to organize by date, (in which it is listed correctly) and choose the destination folder. However, once I perform the import, it creates a completely separate folder under the year "2012". How can I fix this problem to import under the correct file dates?
I am creating photo scenery for Flight Simulator X - my source files are large bmp's. From each of these I create a greyscale file which I Save As a tif file. However, when I recompile the bmp and tif together, I get error messages. Most common is a reference to Date/Time being incorrect.
If I load the tif file in GIMP, it reports "Incorrect Count for field DateTime (21, expecting 20); tag trimmed" - If I then save the tif in Gimp, it recompiles without errors.
When I import photos and video using lightroom, I rename all my files based on date and time using a YYYYMMDD_HHMMSS format. For example:
This works perfectly for photos. That is, the (LR renamed) filename reflects the time the photos was taken (I suppose this is the "capture time"). However, the video time is totally wrong. For example, a video taken at 7PM gets renamed to something corresponding to 1AM.
I notice the following:
- Date/time based renaming of this particular iPhone 4S video works properly in other applications (e.g. Dropbox and PhotoMechanic)
- The resultant filename in LR4 appears to correlate to "Date Time Digitized", which in my case does not reflect when the video was actually taken (I'm not sure if it should or not, I'm only saying that it does not).
Is this expected behavior from LR4?
The behavior I'm seeing means that I have to use yet another application (e.g. PhotoMechanic or other) on the front-end of my workflow (before LR) in order to ensure video files are named "correctly". This is obviously not the desired solution, I'd prefer to do the renaming inside LR at the time of import since it provides a function for precisely this purpose.
All of a sudden I notice that when I open a file in Autocad Architecture, it shows the file creation date and not the actual last save date. Only thing I can think of is I reinstalled 3dsmax Design and I wonder if that changed something. I attached a screenshot for reference.
Building Suite Premium Win 7, ultimate i7 1.86ghz, 4meg ram ATI 5730
When I use the open command in C3D the file date is incorrect for a file. I also have a explorer windows open and it shows the same file with the current date.
This file is located on my local hard drive. C3D shows 11/15/2013 for the date the actual date of the file is 11/26/2013. Even after a save it's still wrong. My isavepercent is set to 0 .
Inside VS 2010 the datetime components format the date string as "dd/MM/yyyy"
Inside autocad 2012 the date formatting is "dd/MM/yyyy"
but inside the .net appication that I am writing, the date.now returns "MM/dd/yyyy" and the compents also reformat to "MM/dd/yyyy" so I end up with lots of "invalid date string" errors
Dim AcadApp As Autodesk.AutoCAD.Interop.AcadApplication Dim acaddoc As Autodesk.AutoCAD.Interop.AcadDocument AcadApp = GetObject(, "Autocad.Application") acaddoc = AcadApp.ActiveDocument Dim DD As Double DD = acaddoc.GetVariable("tdcreate")
I've inserted <CREATION DATE> into the custom title blocks I normally use for drawings. It displays the date without preceding zeros (example: June 18, 2013 is displayed as "6/18/2013" instead of "06/18/2013"). How can I change this?
I have found some great LiDAR information but it is in a compressed LAS file so the extension is LAZ. How to decompress these files so they can be used. The point cloud will only accept the las format.
How can I know that the AGS file is complied the AGS 3.1. or 4? I have a AGS file that it can't to be imported to Civil 3D 2014 - Geotechnical Modules. Is there any tool for doing clarification?
The error is "Pick list item 'FILL' under header GEOL_LEG does not exist in the ABBR table" ...etc...
my adobe photoshop cs came with my laptop so i didnt have to install it or anything.. but now when i try starting the program error messages come up and the program shuts down
DLL- an attempt was made to load a program with an incorrect format then; Adobe photoshop : a required application library failed to load nd the product cannot continue. please reinstall the application
Is there a way to re-order the point file format listing for points on the settings tab? I have tried everything and it will not change the order of the listing.
i made a survey, about 2000 points with my TSC3R6. I exported my CSV file to a PNEZD file with comma seperated. When i try ti import the file (CSV then i made a .txt), C3D tells me "no point file format match found". Then I opened the txt file, searched for any error that would not let me import my points. The only thing i have found would be the description of my points that sometimes had a space between 2 words (ex: bt balast and ht balast) so i changed it to bt-balast and ht-balast. i looked further and didnt found anything else. heres a sample of my txt file:
I am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
I have just installed C3D 2012 and when I show the menu bar, the only choice is Express which used to be the last tool in previous versions. What happened to File - Edit - View - Insert - Format, etc in the menu bar? I need to access them.
I have been using a trial version of LR 4 and would like to know if LR can use the format of "MM-DD-YY" for the subfolder of the destination folder. My many years of files are organized by the "YYYY" top folder then "MM-YY" then by date of shooting, "MM-DD-YY" within the corresponding month. Is this possible or must I continue to rename the folders after import?
how I can go about automatic creation of figures and existing alignment (i.e. Centerline and edges) using csv/txt file data format. Currently I have to snap each line to create Centerline, edge, figures etc. a headache of work! I am using Autocad civil 3D 2012.
What is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 / Win7-64 EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel 950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller) Nvidia GTX-690 Classified - 331.82 SpacePilot Pro 3.17.1, 6.17.7, 4.11
I have GeoPDF that I can't attach properly to drawing in Civil 3D. So with Global Mapper I exported it to geo-referenced ECW. I checked ECW in Global Mapper and ArcMap, everything just fine.
However when I did mapiinsert in Civil 3D, image appeared with shifted coordinates. The original coordinate system is BC/Albers and coordinate grid is Lat/ Longs.
When i attempt to open an IGS file i get "an unnnamed files contains an incorrect path"
I thought it could have been a corrupted file but its not.Tried to create my own IGS file (successful) attempted to open that and failed.Downloaded an IGS file from Autodesk, failed as well.I was having issues opening other files but i updated the video drivers on my Dell M6600.
I'm rebuilding the primary project template folder for my company. This folder contains a variety of drawings linked together using Xrefs and such. I'm setting up sheet sets in the plotting of these sheets.
I'm working with 15 different drawings and setting up 130 sheet sets that will each plot 1 layout from each of these 15 drawings. All of the drawings have the same layout names (A1, B1, C1,...,Z5). So, for example, the A1 layout from all 15 drawings is 1 sheet set.
When a new project is started, the template folder is copied and renamed. A known issue is that this new project still links all of the Xrefs back to the original template folder's DWGs. We use a script plus the 'Redir" command to update the Xref paths.
Now I'm noticing that the Sheet sets I've setup are having the same behavior, and I can't seem to find a way to quickly fix the file path of 130 sheet sets with 15 sheets per set.
Also, any faster way to setup the sheet sets I've described above other then individually adding layouts to their respective sheet set. I was hoping there would be a batch type method given that all the layouts have standard names.
I created a DWF drawing from a PDF file. It was created but not to scale...the dimensions on the drawing says 6' but when i measure it its3'7"1/16.... My question is how do i scale it.. i tried using the scalecommand and referenced the entire drawing to a line a drew that was 6' long....but still it was incorrect?
I have a source drawing with a proposed surface, alignment, and pipe network. When I data shortcut these objects into a new drawing, everything comes in correctly except the pipes. The inverts are incorrect. The pipes maintain correct slope, just the inverts on both ends are off. The structures they are attached to have the correct rim and sump.
I have included a screen shot of the properties box for the same pipe in the source and referenced file.
I'm at a loss. I have made sure the parts list and rules are identical in both files.
I am having problems with the display of my structures in a profile view. Previously, when I change the inverts of the pipes connected to my structure it would automatically adjust the bottom (sump) of the box invert to match my lowest pipe. However, for some reason it has stopped doing it and is now displaying the sump invert incorrectly. I have my style set to "Display as a Boundary". I have edited the structure sump to be by both elevation and depth, but it does not update the sump elevation. I have tried to grip edit the sump but it seems to be locked at a certain elevation. I have a profile with 10+ structures and they are all at multiple depths. I realize there are minimum depths allowed by the structure, but I have exceeded the minimum depths in all cases. Attached is an image that depicts my problem. No matter what I do to change the depth it stays locked at a certain elevation.