When i attempt to open an IGS file i get "an unnnamed files contains an incorrect path"
I thought it could have been a corrupted file but its not.Tried to create my own IGS file (successful) attempted to open that and failed.Downloaded an IGS file from Autodesk, failed as well.I was having issues opening other files but i updated the video drivers on my Dell M6600.
When working with an IAssembly I keep getting an error message that reads "an unnamed file contains an invalid path." I cannot seem to find a problem anywhere.
View 6 Replies View RelatedI need Recursively go to all bomrows and child rows if present in the Bomview Model Data ("Unnamed")
I have the below code but i only goes one level deep.
I tried the code from the inventor that does the trick on a structured bomview but i will fail if you have a virtual componenent that has the same partnumber as a part inserted in the assembly. then it finds the first insertet and errors on the next?
i have to recursively go to the "Unnamed" bomview here the below code does not fail and works, but as written only one level deep, i need all levels?
Public Sub UpdateThisFileBOMRowProperties14062013() 'ByVal oBOMRows As BOMRowsEnumerator) ', ByVal ItemTab As Long) oApp = GetObject(, "Inventor.Application") oAsmdoc = oApp.ActiveDocument ' Set a reference to the BOM Dim oBOM As BOM oBOM = oAsmdoc.ComponentDefinition.BOM
[code]....
I am not sure, if this -- or something similar -- was answered before but I couldn't find any suitable thread/message/...
First of all some system information:
* imac running OSX 10.8.x and macbook running OSX 10.9.1
* Illustrator CC
* Pantone Color Manager
I am trying to use the Pantone Fashion and Home / Paper color library provided by the Pantone Color Manager, specifically for using the Radiant Ochid 18-3224 TPX (Color of the Year 2014). I saved the named library to a *.ase file and opened it in Ai. From the number of colors I guess, that all colors are imported but I can't find the 18-3224. BUT there are lots of "Unnamed Global Colors" with some of them wich might be the one in question. Using 'xxd pantone.ase' in the terminal I can find at least the name "Radiant Orchid 18-3224 TPX", which means, that it is saved in the given file.
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have a problem with file path length BOM. I need to show in BOM only the last folder name, not the whole length of file location. At the moment i´m doing it manually and it takes lot of time to look and find each file location.
View 6 Replies View RelatedI have a standard install of Inventor 2012 SP2, but for some reason it cant seem to find the images for IBL effects. See attached Screen shot, when I go to select an item there is nothing there.
I have found the files in the "c:userspublicautodeskenviroments" folder but why Inventor cant see them?I have looked in "App options" in the "file" tab and in the project file and I cant see any pathing options that relate to the enviroments?
The default images for textures and bumpmaps are all found OK just not the IBL files? How I can set the path to these enviroment images?
I'm looking to get the file path of a selected part/assembly while inside of an assembly. I think I found something that can get it but the example is just different enough I can't figure it out and I don't have time to play with it. There also might be an easier way I couldn't find while searching.
This is the example code that seems to be able to do loads of things including get the full path, if you know what you're doing.
[URL]
Can IV be set up to show the file path to an open file in the IV window title bar (next to "Autodesk Inventor") like Autocad/MDT does?
View 1 Replies View RelatedI created a text line in my idw template that asks for the filename and path as shown in the attach jpg. it works fine with the first idw but since we use multiple sheets in an idw (no vault here) the text line does not show up on the rest of the sheets. how can i get this to show up on every sheet in my idw?
View 1 Replies View RelatedUsing Inventor LT - path does not pull in the file from database when using Inventor LT. Inventor LT does launch but file does not open.
View 3 Replies View RelatedI need to capture a portion of a file path that is in the middle of the entire path.
For example
C:Vault WorkspaceEngineering810810-050000Model
I just want to capture the 810-050000 part. The portion before that may be different lengths, the Model portion will always be the same.
After setting the Application Options-File tab paths to our company standard and manually restarting IV the paths all revert to "%PUBLIC DOCUMENTS % default paths. Our IT guy is having the hardest time tracking down the root cause, Both users are on stand alone licenses.
1. Where does IV pick up these default file paths? Can I modify that .xml manually as a workaround?
2. How to identify the folders to look for that don't have adequate red-write permissions?
How to pull the path & file name of an IPT from within an IDW?
If I use this line from within an IDW:
ModelName = IO.Path.GetFileName(ThisDrawing.ModelDocument.FullFileName)
it will simply return the file name of the corresponding IPT.
I want to be able return the path for the IPT from within the IDW as well.
Product Design Suite Ultimate 2012 64-bit - SP1
Windows 7 64-bit - SP1
I have a "steelplt.png" file that Inventor tells me is not in the correct library path. The problem is that it is in the correct path as defined by the project file. I cannot check in dwg because the "steelplt.png is not in the correct library path".
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
I've been sent an AGS 3.1 file which I'm trying to import to Civil 3D using the Geotechnical module, but keep running up against an error which suggests the date format in the AGS file is incorrect. From what I can see the format should be DD/MM/YYYY, and this is correct in the file, but Geotechnics still won't recognise it.
Is there a different date format I should be using, or is there a way to force the tool to recognise the format in the file?
I'm rebuilding the primary project template folder for my company. This folder contains a variety of drawings linked together using Xrefs and such. I'm setting up sheet sets in the plotting of these sheets.
I'm working with 15 different drawings and setting up 130 sheet sets that will each plot 1 layout from each of these 15 drawings. All of the drawings have the same layout names (A1, B1, C1,...,Z5). So, for example, the A1 layout from all 15 drawings is 1 sheet set.
When a new project is started, the template folder is copied and renamed. A known issue is that this new project still links all of the Xrefs back to the original template folder's DWGs. We use a script plus the 'Redir" command to update the Xref paths.
Now I'm noticing that the Sheet sets I've setup are having the same behavior, and I can't seem to find a way to quickly fix the file path of 130 sheet sets with 15 sheets per set.
Also, any faster way to setup the sheet sets I've described above other then individually adding layouts to their respective sheet set. I was hoping there would be a batch type method given that all the layouts have standard names.
I created a DWF drawing from a PDF file. It was created but not to scale...the dimensions on the drawing says 6' but when i measure it its3'7"1/16.... My question is how do i scale it.. i tried using the scalecommand and referenced the entire drawing to a line a drew that was 6' long....but still it was incorrect?
View 5 Replies View RelatedHow, or if it is possible to change the default file location for a tube and pipe run?
I know that you can browse out and modify the file path on your initial save but is there any way to change the default?
Example of what the default is: (assembly part number = 123456)
location for Tube and Pipe runs: C:ProjectsDesign Files123456123456AIPTube and Pipe
location for Run File: C:ProjectsDesign Files123456123456AIPTube and PipeRun01
example of what I would like the default pathing to be:
location for Tube and Pipe runs: C:ProjectsDesign Files123456
location for Run File: C:ProjectsDesign Files123456
basically I would like to remove the sub folders so all files are saved in one folder location.
My company is using inventor routed systems 2010.
I was performing some FEA analysis and was getting some strange results. So I investigated into my material properties to find that mine were INCORRECT! I looked at some of my co workers material libraries and they seemed to be correct. How do I go about possibly resetting my material properties. I just installed inventor 2014 about a week or 2 ago. I have attached a screen shot of the incorrect material properties.
View 4 Replies View RelatedI'm using Inventor 2013. I created an assembly where I did a lot of top down modeling (meaning components in the assembly were created in the assembly. All but a handful of the components are adaptive to other components). When I went to make my drawings for having the components made, I started noticing that some of the dimension values were wrong. I could go into the model and verify the features, but when dimensioning on the drawing it would not match. Furthermore, this didn't occur on every dimmension on the drawing. Not even half of them were incorrect, but it only takes one to really mess up a part.
I've attached a screen shot of what I'm seeing. The 15.2 and 5 dimmension are correct, but obviously those don't add up to 31.37. I know I can manually override this dimmension, but only if I know to do it. I tried to do a drawing of another part in the same assembly and eventually found a similar problem.
Finally, I created a step file of the 1st part (to strip away the adaptivity) and when I created the drawing again, the problem went away.
My question is, is there something I did in the assembly / creation process that would have caused this?
I am having a problem with an assembly not showing the correct total mass of all of its components and sub-assemblies. The value is out by nearly 20%, over 3000kg!
I have narrowed the mass discrepancy down to a derived part of a sub-assembly. But this incorrect mass is only present when I navigate to the derived part's iproperites via the browser tree of the higher level assembly where I am having the mass problem. It is as though the top assembly got some of its mass property information from a previous point in time, i.e. possibly before the derived part's mass properties were updated, and now refuses to look at the current information.
By the way, I have opened up and checked the mass properties of each sub-assembly and the derived part; and when opened individually these show as correct. I have also tried 'Rebuild All' with no success.
Is it possible for mass properties in an assembly to become corrupted?
From the inventor file menu how to get an in correct recent files list? I get a list that i never worked on. When I carefully take a look, it shows a combination of couple files i worked on and a many files that my colleagues worked on.The tool tip shows it reading from c: empxxxx
View 1 Replies View RelatedI have a roll formed sheet metal part set to use a k factor of .5. The blank size should be (hand calculated) 7.924. Inventor is giving me 7.892. I made a new part with the exact same geometery as the first and set it to also use a .5 k factor, this one develops correctly to 7.924.
I checked all the dimensions multiple times. What am I missing here?
The ribbon layout has changed by itself so that it now displays smaller icons and I have to click on drop down arrows to access sub menus - I had it correct displaying the icons with the sub menus next to them but it seems to have changed.
I have worked through ALL the options available in the ribbons appearance etc. and this doesn't change them.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Actually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
How to create a group? I want to create a unnamed group for a text and box
View 1 Replies View RelatedI had started a new drawing on our template and worked on it for an hour or so. I had not saved it or anything so it was simply titled "Drawing2.dwg." Well, during a simple text command AutoCAD decided to crash. It said it could try to recover the drawing, but when I looked around for it I couldn't find it anywhere.
I've had this happen before...is there ANYTHING that can be done or did I just lose all my work?
Somehow, every time we copy/paste from certain drawings, it brings in 9000+ unnamed blocks. Buried in these blocks are several thousand extraneous linetypes, etc. The blocks do not appear to contain any actual drawing objects, and are virtually unselectable. But the drawing size increases exponentially. Once a drawing is “infected” any item that is copied from it “infects” any drawing that the copied item is pasted into. Needless to say, this creates very large, slow files that are practically unusable. We have relied on copy/paste for notes, details, etc. and only recently started seeing this crop up.
Purge does not get rid of the blocks. We have tried a map query, which seems to ditch the extraneous stuff. But we lose our C3D object intelligence, and that process is far too cumbersome to run on all our drawings. We have tried the following lisp code that I found related somewhat to this topic a while back:
(vlax-for n (vla-get-blocks
(vla-get-activedocument
(vlax-get-acad-object)))
(vl-catch-all-apply 'vla-delete (list n)))
(princ))
Problem is, it deletes blocks C3D seems to need, so again the drawings are rendered basically useless. how to clean the drawings up and or stop the spread of “the plague”
I tried to attach a "blank" drawing that demonstrates the issue. I literally pasted a single line into it, and it is over 9MB, so it would not attach....
HP Elitebook Workstation
Windows 7
I have photoshop CS6 on a macbook pro retina display. When I open an image that is 8MB in finder, photoshop says that it's 143MB.I did not change anything, just opened the file.
View 7 Replies View RelatedI have problem with the file created by Corel. It shows that length of the file is 5min. However, actually it is about 15-20min. When I am running it with VLC media player it shows all the stream ignoring the length. For now, it is the only one player I found that can do it. When I put this file in Corel it shows only 5min and it looks like it skip most of it. Shows the beginning and the end of the file.
Is there any way to change the file that Corel could read it as is, ignoring the length.