I had started a new drawing on our template and worked on it for an hour or so. I had not saved it or anything so it was simply titled "Drawing2.dwg." Well, during a simple text command AutoCAD decided to crash. It said it could try to recover the drawing, but when I looked around for it I couldn't find it anywhere.
I've had this happen before...is there ANYTHING that can be done or did I just lose all my work?
I was working on a Photoshop project and then saved it as a JPEG, but accidentally closed it out without saving it as a project (.psd)... how do I recover the file?
View 1 Replies View RelatedI've recently felt the tragedy of my laptop turning off without me having saved a file. Is there a way to recover it?
View 2 Replies View RelatedI was working on a photoshop project and then saved it as a JPEG, but accidentally closed it out without saving it as a project (.psd)... how do I recover the file?
View 2 Replies View RelatedI am using AutoCAD Civil 3D 2011 and everytime I export a model to AutoCAD format I get the message:
"Warning and error occurred during save. We recommend that you run RECOVER on the drawing"
Although it usually finds one fault during Audit or Recover and fixes that, the message still persists in appearing every time I use the export function. Why this happens and how I can sort it out?
Unable to recover drawing, have tried recover, etc. tried inporting and exploding,
had this fatal error at time of crash FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 50f3488bh
when i clicked the x I hit don't save for one drawing i did not want to save but i did not want to close the next drawing yet the same message came up so fast i hit don't save again without realising and deleted 3hrs of work that i really do not want to do again so is there any way i can recover it?
View 4 Replies View RelatedI am unable to open the enclosed drawing and i tried in recovery but unable to open "Unable to recover data
View 9 Replies View RelatedWe have three old drawings (saved in the year 2009) that we are trying to open with AutoCAD 2013 and we keep getting the message "Drawing File is not valid".
I have done the following:
Files do have a file size. Sometimes, files have 0 KB size, but not these ones.
We tried to open the files using AutoCAD 2013, AutoCAD Architecture 2012 and DWG TrueView (downloaded today!) and in all instances we get the same message.
We tried recovering and the message is "unable to recover the drawing file"
We tried inserting as a block and, in the command line we get "...was created by an incompatible version of AutoCAD *Invalid*" Again, the file is genuinely older than our current AutoCAD.
How to create a group? I want to create a unnamed group for a text and box
View 1 Replies View RelatedWhen i attempt to open an IGS file i get "an unnnamed files contains an incorrect path"
I thought it could have been a corrupted file but its not.Tried to create my own IGS file (successful) attempted to open that and failed.Downloaded an IGS file from Autodesk, failed as well.I was having issues opening other files but i updated the video drivers on my Dell M6600.
I need Recursively go to all bomrows and child rows if present in the Bomview Model Data ("Unnamed")
I have the below code but i only goes one level deep.
I tried the code from the inventor that does the trick on a structured bomview but i will fail if you have a virtual componenent that has the same partnumber as a part inserted in the assembly. then it finds the first insertet and errors on the next?
i have to recursively go to the "Unnamed" bomview here the below code does not fail and works, but as written only one level deep, i need all levels?
Public Sub UpdateThisFileBOMRowProperties14062013() 'ByVal oBOMRows As BOMRowsEnumerator) ', ByVal ItemTab As Long) oApp = GetObject(, "Inventor.Application") oAsmdoc = oApp.ActiveDocument ' Set a reference to the BOM Dim oBOM As BOM oBOM = oAsmdoc.ComponentDefinition.BOM
[code]....
Somehow, every time we copy/paste from certain drawings, it brings in 9000+ unnamed blocks. Buried in these blocks are several thousand extraneous linetypes, etc. The blocks do not appear to contain any actual drawing objects, and are virtually unselectable. But the drawing size increases exponentially. Once a drawing is “infected” any item that is copied from it “infects” any drawing that the copied item is pasted into. Needless to say, this creates very large, slow files that are practically unusable. We have relied on copy/paste for notes, details, etc. and only recently started seeing this crop up.
Purge does not get rid of the blocks. We have tried a map query, which seems to ditch the extraneous stuff. But we lose our C3D object intelligence, and that process is far too cumbersome to run on all our drawings. We have tried the following lisp code that I found related somewhat to this topic a while back:
(vlax-for n (vla-get-blocks
(vla-get-activedocument
(vlax-get-acad-object)))
(vl-catch-all-apply 'vla-delete (list n)))
(princ))
Problem is, it deletes blocks C3D seems to need, so again the drawings are rendered basically useless. how to clean the drawings up and or stop the spread of “the plague”
I tried to attach a "blank" drawing that demonstrates the issue. I literally pasted a single line into it, and it is over 9MB, so it would not attach....
HP Elitebook Workstation
Windows 7
When working with an IAssembly I keep getting an error message that reads "an unnamed file contains an invalid path." I cannot seem to find a problem anywhere.
View 6 Replies View RelatedWe have some users that get the message attached when they publish and plot. How do we stop it?
View 5 Replies View Relatedi have a little layering system i set up. in my drawing, in modelspace (or on any of my sheets), there's a little drop-down box that saves 'unsaved layer state'. if i click on it, i can find my 'personal layer state', select it, and all my layers pop up. but then if i switch tabs for a second, it goes right back to 'unsaved layer state'. how do i keep this on my own personal one?!
View 1 Replies View RelatedI am trying to create a selection set (or LIST) of all objects inside a unnamed GROUP.
I found a means to access the unnamed group, however I am having trouble creating the list.
Command: (entget (cdr (assoc 350 (dictsearch (namedobjdict) "ACAD_GROUP"))))((-1 . <Entity name: 7efe6280>) (0 . "GROUP") (5 . "130") (102 . "{ACAD_REACTORS")(330 . <Entity name: 7efe5c68>) (102 . "}") (330 . <Entity name: 7efe5c68>) (100 . "AcDbGroup") (300 . "") (70 . 1) (71 . 1) (340 . <Entity name: 7efe6268>) (340 . <Entity name: 7efe6260>))
In the example above, there are 2 entities in the group.
What I want to do is to remove a certain entity from the GROUP, then delete the entity.
Repeat until all entities of that type are removed (I can figure this part out...).
How do I create a Selection Set (or LIST) of all entities inside a GROUP?
To access the first GROUP name in the dictionary:
(cdr (assoc 3 (dictsearch (namedobjdict) "ACAD_GROUP")))
I'm very unfamiliar with any but the most basic stuff in Library and Develop. I've attempted to create a slide show, decided I wanted to change it and start over but it seems the unsaved slideshow is still hanging about.
I don't see how to get rid of it, I continue to see an 'Unsaved slide show' written near the top left/center of slideshow screen.I want to just ditch that attempt and start over.
My scene has about 10,000 objects in it, so it's tough to find that unnamed object...
It doesn't seem to matter much, but it's annoying- every time i render a frame I get:
// Error: (Mayatomr.Geometry) : unnamed object is not a mesh, ignored //
// Error: (Mayatomr.Geometry) : unnamed object is not a mesh, ignored //
// Error: (Mayatomr.Geometry) : unnamed object is not a mesh, ignored //
// Error: (Mayatomr.Geometry) : unnamed object is not a mesh, ignored //
I was working on something and it just disappeared and I'd really like to have it back...
View 5 Replies View RelatedI am not sure, if this -- or something similar -- was answered before but I couldn't find any suitable thread/message/...
First of all some system information:
* imac running OSX 10.8.x and macbook running OSX 10.9.1
* Illustrator CC
* Pantone Color Manager
I am trying to use the Pantone Fashion and Home / Paper color library provided by the Pantone Color Manager, specifically for using the Radiant Ochid 18-3224 TPX (Color of the Year 2014). I saved the named library to a *.ase file and opened it in Ai. From the number of colors I guess, that all colors are imported but I can't find the 18-3224. BUT there are lots of "Unnamed Global Colors" with some of them wich might be the one in question. Using 'xxd pantone.ase' in the terminal I can find at least the name "Radiant Orchid 18-3224 TPX", which means, that it is saved in the given file.
CS6 Thinks It Has an Unsaved Document Open But it doesn't. Yesterday I did some testing that resulted in a Photoshop crash that was likely due to a bad font. I restarted Photoshop several times after that and did some testing, then just left Photoshop minimized all night.
Today I went to close Photoshop and got an indication that it thinks a PSB document is open, with the same name as the PSD file I was testing with yesterday when Ps crashed.
I assume this may be somehow related to the AutoSave feature, but the file never opened upon restarting Photoshop.
I used to be able to create animated gif's easily from unsaved files. I would simply select all the layers I wanted to use and process them.
After upgrading to CS6, I'm totally lost. I've followed half a dozen tutorials, but nothing works. The only way I can even load a frame into the Windows Timeline feature is to first save several images from my unsaved file, then reload them by choosing File > Scripts > Load Files into Stacks. But even then I can't find a Make Frames from Layers option when I click the down arrow on the right side of the palette.
Is there a simple way to create animated gif's from layers in an unsaved file on CS6, or do I need to reinstall my older Photoshop version in order to created animations?
Details:
OS X 10.5.8Photoshop CS4
After completing a many-hours-long automated process (Contact Sheet II), Photoshop decided to error out on me as soon as it finished. It has a pop up that says:
"Could not complete your request because of a program error."
It appears that I will need to force-close the application. What's frustrating is that the 102 files it generated are sitting right behind that error, but I can't get it to go away--it just pops back up when I click OK. I really don't want to lock up this computer for another day when the files are right there!
If I could only find the temporary files on my computer I'd quarantine and recover them on my own. I am a little surprised that no one seems to have asked this on Google (or maybe I just can't find it).
Where does Photoshop put its open, unsaved files?
Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedI received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
I've wrritten a plug-in to export the layer as jpeg.everything is fine except that the current document becomes unsaved after exporting the layer.
I want to know that it use to be so or I'm wrong anywhere?
the process which I followed ---
1-) Created an empty Artset and filled it with layer contents.
2-) Then Rasterize the Artset.
3-) Then created a data filter containing the path where to export.
4) Then used AsJPEG( ) to create jpeg.
try creating a new scene, and set autosave on, for a minute or so, and a minute later, a fatal error occurs?
doesn't seem to matter whether your working in the scene or not, result is the same?
Can we have a new option "Do not confirm closing if unsaved image wasexported/overwrited" ?(Edit > Preference > Evironment > Saving Images > Do not confirm closing ifunsaved image was exported/overwrited )
when dealing non-xcf files, afterexport/overwrite the files I can close them without clicking the confirming dialog, it will save so much working time.
I have survey points in drawing A. I want those points to be available for drawing B. How do I do this?
(Coming from LDD where points were project based not drawing specific).
I have many PDF files of a plotted drawing and a few DWGFx files that were previously saved. However, I do not have the original DWG source file for the PDF files. I'm using AutoCAD 2012 and used the "XREF" command then "Attach PDF" from top left corner pulldown to save the PDF in DWG format. However, I do not know if I am able to edit from this state. Do I need to buy a PDF to DWG converter instead? If so, is the Print2CAD the best software to use? I see a few free sites listed throughout the message board.
View 2 Replies View Related