try creating a new scene, and set autosave on, for a minute or so, and a minute later, a fatal error occurs?
doesn't seem to matter whether your working in the scene or not, result is the same?
Autodesk making a student version of Maya available, it's really a wonderful tool for learning the software, however...
Is there any way to turn off the 'this is a student version' notification that pops up <b><i>every single time you save/autosave the file?</i></b>
I attached two external DWG using the add source drawings in map, then I queried a single drawing into my current drawing. Which I must admit was pretty cool. However know every time I save, autosave, or Publish I get the message below.
View 9 Replies View RelatedI've been playing with Scene Referencing, and have a question about skinning. Is the ability to bind a mesh that is part of an Assembly Reference something that will be coming in a future release? I'd like to be able to bind both a high-poly and a low-poly mesh to one rig using scene assembly. That way I can swap armor parts, weapons, etc on one rig without cutting/pasting animation between rigs.
I've attached a picture of a sample of what I'm referring to. If that isn't workable, any other workflow that is comparable?
Got this odd problem When I go to file open and open my scene it doesn't show everything in my scene.But when I go to file import it shows everything.
View 3 Replies View RelatedIve been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
View 5 Replies View RelatedNew user to Maya here. I recently have been working on some scenes at the office and found out afterward about Maya's Projects settings and auto creation... Needless to say, my current files are now not part of a Project.
Is there any way to take the currently open scene and export it as a new Project or Gather the files from a scene and build a new Project without having to do it manually?
What is a good way to merge references back into a scene to upload to render farm?
View 2 Replies View RelatedWhy the Plane disappear when open New Scene? I try to adjust the Near Clip under Camera, it works but what could have made this happen (I mean Plane/Grid suddenly disappear?)
Not sure if the following would be the reasons: Recently I have tried to open files related the Maya sample file (tutorial disk)but I can't open it directly from the CD. I noticed that there might be some tricks that I have to same the file as an ASCI file and the open in Wordpad, then I could successfully open that. So I try to copy the Tutorial files in the CD to my Harddrive. When I open that from Wordpad, it works!. I am not sure if that could be the causes of my proble (ie. Plane/Grid disappear), or I might have done something which I am not aware of? Also, those axis arrows seems so long and I need to adjust that (I mean the arrows extend outside the Plane/Grid).
I want to put multiple people in the scene. So I'm trying to import people.fbx into the scene. It succeed at the first time. I grouped the meshes and skeleton and name it in name people1. But I can't import the same people.fbx again. Is there any way to import one .fbx into the scene for multiple times?
View 1 Replies View RelatedWe make a small Animation Movie and from time to time we stumble upon strange behaviours of the referencing pipeline.
There is a Kitchen that will be the scenery for the Movie Scene Set up: all models i.e the toaster, the fridge ansd so on are modeled and saved.then in the Kitchen File we have an empty scene where all the objects are referenced in. thats the "model master"scene.now we referenced the toaster_model into toaster_shaded, did all the shading and changed the references in the kitchen from toaster_model to toaster_shaded.
On some objects we noticed, that the updates made on the models for examlpe if we scale up the toaster on 2 and freeze transforms afterwards, the change is not updated in the Kitchen file. But after a few days the update works...
System:
AMD x6 3.2Ghz
16gb Ram
Nvida GTX 460SE
how can i import anything into my scene without adding those suffex into each geometry or node existed in the imported scene..sometime i have to import scene which has alot of nodes any geometry into another one, but i'll fall in many troubles like renaming anyman more which is inconvenent at all.
View 3 Replies View RelatedI am getting Error 1603. Fatal error during installation while installing photoshop Cs 6.
View 2 Replies View RelatedI'm new to Maya 2011 and simply put, I need to know the basics of animating a camera around a scene, along a path, slowing down and speeding up, how to move the point of interest, that type of thing.
View 1 Replies View RelatedNew when it comes to any kind of environment modeling, but I'm trying to make a simple landscape with grass and trees for a project.
I've got a nice ground plane and a simple grass plane with a texture applied from Photoshop. I was wondering if there is a way to paint instances of my grass object without manually duplicating and placing each individual blade of grass?
In my scene i have a fully rigged character, with a walk cycle animation on him. what i would like to have is a row of characters walking around. (kind of like how you see military soldiers walk around while in group). The part that is giving me the most trouble with this is getting multiple copies of the same character into my scene.
What i have tried and failed with:
Grouping my full rig and then duplicating.
making instances of my character and messing around with particles.
i have made multiple attempts at trying to use duplicate special.
the only thing that seems to kind of work is making a scene with just one character and importing it into my main scene and changing a bunch of stuff around. with the amount of copies i need this workflow just feels really degrading and tiresome.
can't select range of time in some Scene
[URL]........
look what happen when i del all the key in the HumanIK system
[URL].......
My scene has about 10,000 objects in it, so it's tough to find that unnamed object...
It doesn't seem to matter much, but it's annoying- every time i render a frame I get:
// Error: (Mayatomr.Geometry) : unnamed object is not a mesh, ignored //
// Error: (Mayatomr.Geometry) : unnamed object is not a mesh, ignored //
// Error: (Mayatomr.Geometry) : unnamed object is not a mesh, ignored //
// Error: (Mayatomr.Geometry) : unnamed object is not a mesh, ignored //
I have a hard time copying/pasting graph editor curves from a scene to another, since it`s only a specific part of the timeline, is there some basic rules that are to be observed for things to work properly? Yes after a thousand tries i`m going to have to edit every darn ecking curves accordingly to those i wanted to copy.
View 2 Replies View RelatedI have a maya designed animation model file (filename.ma) with 3000 frames. I want to split it into 3 maya scene files each of which have 1000 frames.
How can I do this in Maya 2012?
I'm running several dynamic simulations via the API. Then I am getting the results to write in a text file. I want to know the force in a joint so I get the vector of values via
Dim oResults As DSResults
Dim oResult As DSResult
Dim value() as Double
Call oResult.GetResultValues(value())
this vector is a time, force vector but when I verify mi data against the Output Graphe all the decimal points from the force information are gone.
Example:
In Output Grapher
Time (s)Force(N)
0.0118955.66
0.0219500.88
In the vector from API
0.01
1895566
0.02
1950088
is there a way to correct this? I'm getting many force and movement info, so I don't know which ones are reliable.
I try to upload photo's from my i-Phone with the adobe photodownloader I get a fatal error and it needs to be closederror code c0000005adres 7c9109f9what can I do?it worked before and I don't think I changed anything besides updating i-tunes, i-phone software and firewall, virusscan etc.
View 3 Replies View RelatedI have made two attempts to download CS3 on a trial basis, each time at the end of the download I get a "fatal error " message. Why is this ?
View 8 Replies View RelatedI'm trying to export meta-data for a 5 years old MRW file in LR 4 Win x64 residing there since LR 2, but it results in "Could not write metadata. Unknown file I/O error. (1)" error. I have checked the file permissions and it seem to be fine. What else shoudl I check for?
View 1 Replies View Relatedi coded this simple utility that allows the user to edit some dbtext without using the mouse (after selection).
It works but sometimes, it seems randomly, i get a fatal error.
This is the code
public void Run(object param)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
[Code]....
The run function it's called from a commandmethod with the CommandFlags.Session flag.
I keep on getting the fatal error messages like FATAL ERROR: unhandled Access Violation Reading 0xffffffff Exception at 1a89fc50h, when doing simple commands such as move, copy or selecting objects. It has also occurred when I've tried to save. They can occur up to 4 times a day .
I have tried emptying my temp folders and I've ensured my copy of AutoCAD 2011 LT is up to date but these are only temporary solutions as a few days later they will appear again.
I am trying to Install Adobe Photoshop CS4, but every time getting an error:
Adobe CSI CS4
Error:
Error 1603. Fatal error during installation.
If I see the Logs, here are few lines around searched pattern "1603".
5:5:21:968 -(Adobe)- -*-*-*-*-*-*-*-*-*-*-*-*- BEGIN - Adobe_ProtectedContent -*-*-*-*-*-*-*-*-*-*-*-*-
5:5:21:984 -(Adobe)- Requesting property: CustomActionData
5:5:21:984 -(Adobe)- Stream extraction to recordset
5:5:21:984 -(Adobe)- Number of Properties: 2
5:5:21:984 -(Adobe)- Name, Value: Count 0
5:5:21:984 -(Adobe)- Name, Value: Prop 3A4D8E3D83E0425FA8FBB04538CDC2A0
5:5:21:984 -(Adobe)- Acquired custom action data
5:5:21:984 -(Adobe)- GetMapProperty returned: Count = 0
5:5:21:984 -(Adobe)- No records to process
5:5:21:984 -(Adobe)- -*-*-*-*-*-*-*-*-*-*-*-*- END - Adobe_ProtectedContent -*-*-*-*-*-*-*-*-*-*-*-*-
[ 3584] Fri Mar 06 10:35:22 2009 INFO
5:5:22:437 -(Adobe)- -*-*-*-*-*-*-*-*-*-*-*-*- BEGIN - Adobe_FirewallAuthorize -*-*-*-*-*-*-*-*-*-*-*-*-
5:5:22:453 -(Adobe)- Committing firewall data. Inverted: 0
5:5:22:453 -(Adobe)- Requesting property: CustomActionData
5:5:22:453 -(Adobe)- Stream extraction to recordset
5:5:22:453 -(Adobe)- Number of Properties: 4
5:5:22:453 -(Adobe)- Name, Value: ProductName Adobe CSI CS4
5:5:22:453 -(Adobe)- Name, Value: InstallPath0 C:Program FilesCommon FilesAdobeCS4ServiceManagerCS4ServiceManager.exe
5:5:22:453 -(Adobe)- Name, Value: EnablePort0 5353
5:5:22:453 -(Adobe)- Name, Value: EnablePortProto0 6
5:5:22:453 -(Adobe)- Firewall interfaces initialized
5:5:22:453 -(Adobe)- Testing key: EnablePort0 Root: EnablePort Index: 0
5:5:22:453 -(Adobe)- Adding entry: Adobe CSI CS4 for port: 5353 with protocol: 6
5:5:22:468 -(Adobe)- Return code from operation: 1603
5:5:22:468 -(Adobe)- #_AdobeError_# 1603 ...
I get a fatal error (attached) when I hover over an mpolygon in a dwg file (also attached).
Map 3D 2011, SP2, Win 7 pro 64 bit.
I have tried audit - it did not fix the problem.
Mental Ray Fatal error when rendering
View 3 Replies View RelatedI've loaded Max 2013 onto a render node. When I run backburner it starts to Launch 3ds Max 2013 the give me a DBXHost message ObjectDBX has reported a fatal error. Unable to load AcDB resource file.
The machine is running XP 64 with 8 gigs of Ram
Just installed Map 3D 2012 and Bluebeam Revu cad version. Restarted m'puter and Message pops up, then CAD closes. Very counter productive.
Autodesk AutoCAD Map 3D 2014
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM