I attached two external DWG using the add source drawings in map, then I queried a single drawing into my current drawing. Which I must admit was pretty cool. However know every time I save, autosave, or Publish I get the message below.
View 9 Replies
I'm weaning myself off of Adobe's PDFMaker and learning how to publish.
I've got everything working but I'm prompted at an Adobe prompt (Save PDF File As...) for every sheet
which is overwhelming when I have multiple drawings with multiple sheets.
I don't know how (or if it is possible) to make it just save to the default name and continue onto the next one.
My autosave keeps giving me this message when ever it goes to save. What does this mean?
View 9 Replies View RelatedI'm getting this message after creating a new tube run: "H6705-51.ipt can only be saved in the context of H6705.Tube and Pipe Runs.iam"
I've never had this error come up. I added a tube run to an assembly and just couldn't save the new run. I tried opening the main tube run file and also the individual tube run but I get the same kind of error message.
After the latest patch installation, Photoshop CS5 ext. (12.1 x64 on windows7 64bit) don't save the files on the PDF format. The message: "the file is already open on other application"
View 6 Replies View RelatedWhen I go to import a clip into videostudio, I get this message: "no storage to save BB" I click ok, then I get the "load from stream error" message.
Here is my info:Windows XP, videostudio 12, Dell Dimension E520. I'm importing an uncompressed AVI (I've done this loads of times with not problems) and I get the message while it's importing.
I get this message when trying to save files in Photoshop CS2. This happens about 90% of the time when I try to save or save as. I have to save to the desktop or another folder for it to work.
Message I get: "Could not save "Name.tif" because of a disk error."
I have an ai file that I can not save with out getting the File I/O error message. One person suggested that this file may be corrupted since I've been bouncing back and forth between 2 different Illustrator programs. I use CS-4 at work, save as CS-3 format then continue working on it at home. I tried copying each layer to a new fresh doc. but still get the error code. Is there a way to fix this file? Both back-up files I have behave the same way.
View 3 Replies View RelatedI am using PS 5.5. Has been working fine for years and suddenly now upon clicking save for web, i get the error message; could not support the export command because Photoshop 5.0 does not supply the services required by the plug-in module and then crashes.
View 13 Replies View RelatedYahoo mail is my default mail program. Works fine with everything except photoshop elements 10 photo sharing facility!
Tried everything to get it working. This is my last resort. My email address has been verified by Adobe.
The mail client that opens look nothing like I've seen before. I assume it is an Adobe interface. Clicking SEND gives the error message in the subject heading.
I am unable to save an image as a jpg file!!! every time I try, I get the following error: "Not A Regular File"
I can save as png, but not jpg!!! the original format was psd, that error message came up when saving as jpg... when I saved as png, I closed Gimp and reopened the png file, but I STILL get that error message when saving as jpg!!
The message reads "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created." I am using AutoCad Civil 3D 2011.
View 3 Replies View RelatedI have problem with Civil3d 2010, when i open heavy drawing or 1 or more drawing will struck out of system memmory cannot continu the drawing , how can i fix, i already install update package 1 & 2 my system config.,and error shown on attached file. a
View 5 Replies View RelatedJust trying to clean up a surface. I can swap edges fine. This project was a 2009 project.
View 1 Replies View RelatedI very frequently get the above message, "Oject was open for Read". Its to do with annotative text objects which I just recently started using. When I get the message the piece of text I am trying to make changes to is frozen, cant delet it or anything?
View 9 Replies View RelatedI'm getting a command line message 'no solution found' when I try and create a slide line in teh Parcel Layout Tools. I have my site boundary and I'm using it to get my reference angle.
View 6 Replies View RelatedI'm getting several messages saying "value on wrong side of alignment" when I rebuild my corridor. I've checked the two target alignments that I'm using and they are on the correct side.
Civil 3D 2014
I have a baseplan I was sent for senior design project and it was previously created in an earlier version of autocad. However Im not sure which version it was created in. There are almost 3000 points and contours but I can not use these points to create a surface. I am ultimately trying to create a surface and then a profile for a road to design vertical curves throughout.
I cut out a few points and copied them into a new drawing due to the size of the actual file
Trying to edit and save this file fails silently, because Photo-PAINT does get confused by a file name like this: "filename.morename.extension". Nothing gets saved.
The actual file name taken from my example file is: "Flag_of_Germany.svg.png".
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
When I run my corridor I get an error message that says "Failed Target Not Found" it is for the subassembly provided by WisDOT called UrbMedian.
View 4 Replies View RelatedI am working on a 6 mile highway project whose surface file is 85MB big. So, I created a Data Shortcut of this surface and used this for creating profiles. However, at some locations the corridors go below the surface(as per their original profile) which was not intended. So, I need to restrict the surface to follow the corridors but not go beyond it.
I have created feature lines from corridors and tried to add them as breaklines to the surface. But " error adding breakline" error pops up.
Is it because I am trying to add the breaklines to the mirror surface which I created from Data Shortcut ??
Will it be useful if I copy feature lines to original surface file and add these feature lines as breaklines in that file??
Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012
Undefined group code 10 for object on line 2106.
Invalid or incomplete DXF input -- drawing discarded.
I created stream profiles in RASPLOT using its DXF Editor but when I try to open up the DXFs in AutoCAD I get the above error.
try creating a new scene, and set autosave on, for a minute or so, and a minute later, a fatal error occurs?
doesn't seem to matter whether your working in the scene or not, result is the same?
2013 C3D crashes on me a little less than once a day. Fatal errors and recoveries are also quite popular. Today, the crash took Windows 7 down with it too - a rare treat.
I have Autosave set to 20 minutes and also have the box for creating a backup file with each save checked under Options > Open and Save.
When Drawing Recovery Manager opened today, the dwg I was working on says it was last saved over 1.5 hours ago. The bak file was last saved yesterday. Usually, there's a sv$ file, but not this time. The sv$ file is typically the most up-to-date file.
Shouldn't I see a "last saved" time and date of about 30 minutes ago for my dwg? Same for the bak file? Is there some other variable that I need to set?
C3D 2013
I want to set my autosave (In Options) at 30 minutes but it seems that my Civil 3d 2012 sets itself back at 10 minutes.
I even try to set it in the dialog box with SAVETIME command at 30 minutes but it gives me the a prompt telling that its been setted at 10 minutes.
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
Autodesk making a student version of Maya available, it's really a wonderful tool for learning the software, however...
Is there any way to turn off the 'this is a student version' notification that pops up <b><i>every single time you save/autosave the file?</i></b>
Every time I export a C3D drawing to ACAD (command: _AecExportToAutoCAD20xx), I get this "error message"
There does not seem to be a real problem because I can open the exported drawing in vanilla AutoCAD OK, (although I do still get a proxy notice..?).
A few other older threads about this reveal no solution or confirmation that this dialog is a bug.
[URL]
When I attempt to "authorize" Lightroom to access my Facebook account I get a "webpage cannot be accessed" and the address [url].... and a ridiculously long string of jibberish afterward. Same thing happens with the built in publish service for Flickr.
View 7 Replies View RelatedI am using AutoCAD Civil 3D 2011 and everytime I export a model to AutoCAD format I get the message:
"Warning and error occurred during save. We recommend that you run RECOVER on the drawing"
Although it usually finds one fault during Audit or Recover and fixes that, the message still persists in appearing every time I use the export function. Why this happens and how I can sort it out?
why I'd get this error when doing an Export to AutoCAD 2010/2007/2004...? It seems to be innocuous, and irrelevant, but it's disturbing none-the-less. I haven't been able to identify any reason why it appears, and all drawings seem to work normally, with no problems. AUDITs turn up no errors. So I've just been ignoring this message, but it's distracting. And it doesn't always appear... although I haven't been able yet to identify what causes it to appear in some drawings, and not others. I think it only ever happens when there's an XREF, but not sure... (Maybe when an XREF is in an older version of C3D/LDD/AutoCAD...?)
View 9 Replies View RelatedPerhaps I have changed a setting inadvertently, although lately the following has been occurring when using the built in AutoCad DWG to PDF plot:
- if I plot a single sheet, I can choose the save location and it is all good
- if I go file publish and print multiple layouts at once (into the pdf), I am not given the option of where it can be saved, instead it is saved in the location the last pdf was (annoying when that is different job folders etc)
What do I need to change to fix it so I can always choose the save location?
