The message reads "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created." I am using AutoCad Civil 3D 2011.
View 3 RepliesWhen I create a new layer by placing an image from another file and then try to edit it (like removing the background from an image) I keep getting this message, "Could not complete your request because the smart object is not directly editable."
View 5 Replies View Relatedinfo on the following error message when saving to the style library.
View 5 Replies View RelatedWe have AutoCad LT 2012 version. We encounter fatal error when we save the drawing. we cannot finish our job because everytime we save our work it will show a messsage FATAL ERROR.
View 5 Replies View RelatedSo, I have a .PSD file I want to Re-save Over the existing one already on the hard-drive, but everytime I save the file it says the file is "Locked, unlock it in Properties, via Internet Explorer options".
Well, none of the layers in the file are locked. I tried the settings on my computer and didn't find any option that related to the error. The question is, What type of setting in Internet Explorer might have caused this, and How do I fix it?
After that, I tried saving a Different file I was working on, and it saved- with no Error-message.
Is it a security setting? But, if so- why does this problem only occur with This file and not others?
I am running Photoshop CS3 Extended on a Windows XP Pro, with SP2 installed. The computer has two hard drives installed. On all previous versions of Photoshop I've been able to save a file to my 2nd hard drive easily by typing "D:image.jpg"
When I try to do the same in Photoshop CS3 I get an error message that says "could not save as d:d:image.jpg because the file name was invalid"
So I have to hit SHIFT+CTRL+S then type "d:" and then type a file name, making it a 2 step procedure to save a file now. If I don't follow this procedure, and just type the filename it saves the file on drive C: in a subdirectory.
Obviously it's a path error, but I've never had a problem with a straight out command "D:image.jpg" on previous versions and looking at the Preferences options or doing a search for this error didn't shed any light on this issue.
I cannot save for web and devices for some reason. I get the error message shown in the screen shot below.
I'm using CS5 extended, version 12.1, 64 bit. My OS is windows 7. It doesn't matter whether it's a JPG file or a PSD, I get the same error message, and I am unable to find a solution so far.
Strangely, every time I click "save" in CS6 it opens up a 'Save As' window, (which shouldn't happen), then I click save witht the existing file name (it then tells me the doc already exists), I click OK, (and then OK to the next popup window) then get the message that "This file cannot be found". I'm forced to click "ok" and the doument isn't saved. I've tried saving it differently in previous versions and it still doesn't work. I recorded a video of this behavior. You can see it here - [URL]
Why would it be trying to find a file? It seems like an error message when trying to Open a doc, not Save a doc. I can't shutdown my station until I get the document to save.
I have problem with Civil3d 2010, when i open heavy drawing or 1 or more drawing will struck out of system memmory cannot continu the drawing , how can i fix, i already install update package 1 & 2 my system config.,and error shown on attached file. a
View 5 Replies View RelatedJust trying to clean up a surface. I can swap edges fine. This project was a 2009 project.
View 1 Replies View RelatedI very frequently get the above message, "Oject was open for Read". Its to do with annotative text objects which I just recently started using. When I get the message the piece of text I am trying to make changes to is frozen, cant delet it or anything?
View 9 Replies View RelatedI'm getting a command line message 'no solution found' when I try and create a slide line in teh Parcel Layout Tools. I have my site boundary and I'm using it to get my reference angle.
View 6 Replies View RelatedI attached two external DWG using the add source drawings in map, then I queried a single drawing into my current drawing. Which I must admit was pretty cool. However know every time I save, autosave, or Publish I get the message below.
View 9 Replies View RelatedI'm getting several messages saying "value on wrong side of alignment" when I rebuild my corridor. I've checked the two target alignments that I'm using and they are on the correct side.
Civil 3D 2014
I have a baseplan I was sent for senior design project and it was previously created in an earlier version of autocad. However Im not sure which version it was created in. There are almost 3000 points and contours but I can not use these points to create a surface. I am ultimately trying to create a surface and then a profile for a road to design vertical curves throughout.
I cut out a few points and copied them into a new drawing due to the size of the actual file
When I run my corridor I get an error message that says "Failed Target Not Found" it is for the subassembly provided by WisDOT called UrbMedian.
View 4 Replies View RelatedI am working on a 6 mile highway project whose surface file is 85MB big. So, I created a Data Shortcut of this surface and used this for creating profiles. However, at some locations the corridors go below the surface(as per their original profile) which was not intended. So, I need to restrict the surface to follow the corridors but not go beyond it.
I have created feature lines from corridors and tried to add them as breaklines to the surface. But " error adding breakline" error pops up.
Is it because I am trying to add the breaklines to the mirror surface which I created from Data Shortcut ??
Will it be useful if I copy feature lines to original surface file and add these feature lines as breaklines in that file??
Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012
Undefined group code 10 for object on line 2106.
Invalid or incomplete DXF input -- drawing discarded.
I created stream profiles in RASPLOT using its DXF Editor but when I try to open up the DXFs in AutoCAD I get the above error.
Deleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
View 1 Replies View RelatedWhen I try to save a drawing, the box to choose the location, how I want to save doesn't show.
View 3 Replies View RelatedI am trying to make parts in part builder but when I try saving I get the error message "error saving XML file". I tried changing the setting on the files for saving but that doesn't seem to work.
View 5 Replies View RelatedI'm trying to do a save as of a previously created and validated part. When I create a new chapter and try to save the part in the new chapter, I get an error message saying "ERROR SAVING COLE FILE". What is a COLE file and why am I getting this error? Could there be a problem because the original part was created in 2013, and now I'm working in 2014?
We recently changed the location of our CAD Standards (such as Pipe Network Catalog). Can I simply copy the Pipe Network Catalog and paste it to the new location and have everything work the same or do I have to do something special?
I am working on the part builder tutorials for AutoCAD Civil 3D 2014. Every time I click "Save Part Family", I get the error message "Error Saving XML File".
View 4 Replies View RelatedI get this every time i try to close an .ipt.
The current operation requires data from docuemt {location on my network{ but it cannot be found.
In Elements 9 I now get an error message "Cannot use Clone Stamp due to program error".
View 1 Replies View Related have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedI'm using AutoCAD 2012 LT and have having problems inserting/updating/editing fields. This is the error that appears
"There are no registered modules to edit fields or demand loading is currently disabled". When I click OK the Field pop-up appears empty! (see attached)
The BEDIT command is also not working. It was all working up until a few days ago! I have downloaded the most recent Service Pack and it's still not working.
A user is having issues with plotting from AutoCAD LT, when trying attempting a normal plot to PDF the program crashes and he is forced to close it, also when changing the way he plots to plot to DWG PDF it starts to work correctly but brings up a fatal error message as below and attached:
FATAL ERROR: Unhandled Access Violation Writing 0x0014 Exception at 778e224dh
When i try to convert my .dwg to a pdf on my laptop (second computer) i get an error message that the drawing might be password protected. it happens on all my autocad drawings
View 3 Replies View RelatedEvery time I try and plot a drawing I get this error message:
' YOU CAN NOT USE MULTIPLE INSTANCES AT THE SAME TIME'. The program then freezes for a short while then returns a message saying plot canceled.
I am using Map 3D 2011. Although I did have a trial version of AutoCad 2012 I had no problems plotting on both versions up until recently I have made no changes to any printer configuration, plot files or styles. I removed 2012 after I started getting this message but still I am unable to plot.