AutoCAD Civil 3D :: Automatic Parcel Design Error Message

Dec 27, 2013

I'm getting a command line message 'no solution found' when I try and create a slide line in teh Parcel Layout Tools. I have my site boundary and I'm using it to get my reference angle.

View 6 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Parcel Map Check Report ERROR

Jun 21, 2012

i am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot.  when i try an run a report i get Error  -  Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.

View 2 Replies View Related

AutoCAD Civil 3D :: Parcel Object Layer Line Under Parcel Style And Plotting

Aug 26, 2013

I have a record plat drawing with multiple parcels and parcel styles. For my lands of the grantors I view port froze the lots and right of way layers from my parcel styles. I don’t want to show them in this viewport. To my surprise the lines show up in the object layer we have set for parcels.  This was not the case in 2011. We are in 2014 with the first hotfix update. I understand putting the parcel styles in the object layer, but why another mysterious line under it? I did create parcels from objects, but had them erased when I created them. This did not matter either way. Is there a way to get rid of them? I did put them in a new layer, set it to “No Plot” This kept them from plotting, but I really don’t want to have to take the time to do it.

View 6 Replies View Related

AutoCAD Civil 3D :: Parcel Labeling Outside Of Parcel?

Oct 17, 2012

When creating and labelling a parcel Autocadd Civil 3d places a label in an adjoining area outside of the intended parcel.

The label seems ubrelated to the intended parcel and is labelled with a diferent parcel number, area, etc.. No additional parcel boundaries seem to be created.

Have created a closed polyline for parcel creation as well as a number of other steps to ensure that there are no breaks in the enclosed parcel.

View 4 Replies View Related

AutoCAD Civil 3D :: Error Message - Prevents Saving

Sep 20, 2010

The message reads "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created." I am using AutoCad Civil 3D 2011.

View 3 Replies View Related

AutoCAD Civil 3D :: Error Message-Out Of System Memory

Dec 1, 2009

I have problem with Civil3d 2010, when i open heavy drawing or 1 or more drawing will struck out of system memmory cannot continu the drawing , how can i fix, i already install update package 1 & 2 my system config.,and error shown on attached file. a

View 5 Replies View Related

AutoCAD Civil 3D :: 2012 - Error Message When Trying To Add A Line To A Surface

Jun 19, 2012

Just trying to clean up a surface.  I can swap edges fine.  This project was a 2009 project. 

View 1 Replies View Related

AutoCAD Civil 3D :: Error Message - Object Was Open For Read

Nov 27, 2008

I very frequently get the above message, "Oject was open for Read". Its to do with annotative text objects which I just recently started using. When I get the message the piece of text I am trying to make changes to is frozen, cant delet it or anything?

View 9 Replies View Related

AutoCAD Civil 3D :: Map Error Message On Save / Autosave Or Publish

Sep 4, 2013

I attached two external DWG using the add source drawings in map, then I queried a single drawing into my current drawing. Which I must admit was pretty cool. However know every time I save, autosave, or Publish I get the message below.

View 9 Replies View Related

AutoCAD Civil 3D :: Event Viewer Error Message When Rebuilding Corridor?

Nov 6, 2013

I'm getting several messages saying "value on wrong side of alignment" when I rebuild my corridor.  I've checked the two target alignments that I'm using and they are on the correct side. 

Civil 3D 2014

View 2 Replies View Related

AutoCAD Civil 3D :: Converting Points Error Message / Invalid Selection Set

Mar 4, 2013

I have a baseplan I was sent for senior design project and it was previously created in an earlier version of autocad. However Im not sure which version it was created in. There are almost 3000 points and contours but I can not use these points to create a surface. I am ultimately trying to create a surface and then a profile for a road to design vertical curves throughout.

I cut out a few points and copied them into a new drawing due to the size of the actual file

View 3 Replies View Related

AutoCAD Civil 3D :: Error Message On Running Corridor - Failed Target Not Found

Jul 9, 2013

When I run my corridor I get an error message that says "Failed Target Not Found" it is for the subassembly provided by WisDOT called UrbMedian.

View 4 Replies View Related

AutoCAD Civil 3D :: Error Adding Breakline Message When Editing Surface With Feature Lines

Jul 11, 2012

I am working on a 6 mile highway project whose surface file is 85MB big. So, I created a Data Shortcut of this surface and used this for creating profiles. However, at some locations the corridors go below the surface(as per their original profile) which was not intended. So, I need to restrict the surface to follow the corridors but not go beyond it.

I have created feature lines from corridors and tried to add them as breaklines to the surface. But " error adding breakline" error pops up. 

Is it because I am trying to add the breaklines to the mirror surface which I created from Data Shortcut ??

Will it be useful if I copy feature lines to original surface file and add these feature lines as breaklines in that file??

Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012

View 2 Replies View Related

AutoCAD Civil 3D :: Error Message - Undefined Group Code 10 For Object On Line 2106

Aug 21, 2012

Undefined group code 10 for object on line 2106.

Invalid or incomplete DXF input -- drawing discarded.

I created stream profiles in RASPLOT using its DXF Editor but when I try to open up the DXFs in AutoCAD I get the above error.

View 3 Replies View Related

AutoCAD Civil 3D :: Parcel Labels In Layouts

Apr 4, 2013

On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.

This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.

Any technique for handling this situation?

Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600

View 7 Replies View Related

AutoCAD Civil 3D :: Custom Parcel Report

Oct 24, 2012

I copied the General Legal Description report and renamed it.  When I ran the report, it asked me to save the file Civil.html before opening it.  If I run the OOTB report it does not ask me to save the page before opening it.  Is this something that I can fix?  I have not found a setting anywhere that changes this.

View 1 Replies View Related

AutoCAD Civil 3D :: Label All Parcel Lines At Once

Apr 27, 2012

I need to make a map of a subdivision with all lot dimensions. I see how we can label all the lines of a lot by picking the parcel label, but it only allows one at a time.

View 6 Replies View Related

AutoCAD Civil 3D :: Parcel Area Not Shown

Oct 21, 2013

I am new to C3D and I have been going through all of the tutorials and learning everything I can from the given data, which has been amazingly useful.  Everything has been running spot on except today when I was going throughtthe parcels tutorial, I applied Parcel Number and Area to a group of parcels I created via the tutorial dwg file "Parcle-1A".  Everything displays correctly except the Area is not shown as it does in the sample pic.  I have applied the "Parcel Number And Area" to the Area Label Style, but it still does not display the area.  Only the Parcel Number.  Is there some part of this process that I am overlooking?  The tutorial dwg file is called "Parcel-1A".  It was too large to attach, but you can find all of the tutorial dwg files via the Help Menu.  It depends on your OS to where they are located.

If you go under Parcels Tutorial>Exercise 1: Creating Parcels from AutoCAD Objects, you can see exactly what I am working with.

C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit

View 2 Replies View Related

AutoCAD Civil 3D :: Parcel Table Header

Oct 30, 2013

I have a drawing with two parcel tables in it. I would like the header on one to be Line Table 1 and the other Line Table 2, is this possible? When I change the text in the style, the header in both change.

View 2 Replies View Related

AutoCAD Civil 3D :: Parcel Center Points

Aug 21, 2013

2014 (COM Preferred)

Are Parcel center points available in the API?

The origin of the Area Label would be ideal.

View 8 Replies View Related

AutoCAD Civil 3D :: Parcel Preview List

Jan 7, 2014

What setting/toggle needs to be turned on to preview the list of parcels in a site?  I have a user who clicks on the parcels heading in his site and doesn't see a preview of the list:

Don't deal it as parcel preview when you actually click on the name of the parcel.  That I do know how to toggle on.  We're just looking for the list.

View 9 Replies View Related

AutoCAD Civil 3D :: Set Parcel Userdefined Properties From API

Aug 21, 2012

I am trying to set the value of the exisitng userdefined property "Address" of Parcels using the com method SetUserDefinedPropertyValue but have had not luck. I have looked at the following help sections but that has not worked.

[URL]

View 1 Replies View Related

AutoCAD Civil 3D :: Parcel ROW As Corridor Targets

Aug 7, 2011

Is there a way to make the parcel ROW as my target with for my corridor?

View 2 Replies View Related

AutoCAD Civil 3D :: Parcel Flip Line

Jul 16, 2008

I have parcel segments with a PL linetype. One of the segments came in upside down. Is there a way to flip this line without actually manually pulling the pickbox's?

View 8 Replies View Related

AutoCAD Civil 3D :: Parcel Style - Name Template

Mar 8, 2012

I would like to have my parcels be able to label the lots with sometihng other than the Lot # given by the setup of the parcel itself. What i'd like to be able to do is have it label Outlot A - which I haven't been able to figure out to date.

How can I get the parcel style to use something other than the word Lot or a number (given the typical lot is a number). We have various reasons why Outlot A is a needed label. How does one go about getting C3D to use something other than the name template in parcel style. I can toggle the name template option off once I create the parcel. But, when I toggle it off - then go to the name and change it to Outlot A - the parcel label still shows as Lot 1. Why?

C3D 2011 32bit
Win XP SP3

View 5 Replies View Related

AutoCAD Civil 3D :: Parcel Segments From Autodesk

Oct 4, 2013

C3D 2013 managed dot net..I was hoping to find ParcelLoops as a member of Parcel. But its not. used AECC_PARCEL as dxf selection filter then passed to object type; Autodesk.Civil.DatabaseServices.Parcel

I need to access the parcel boundary segments .. have I used the incorrect object?

View 4 Replies View Related

AutoCAD Civil 3D :: Edit Parcel Curve

Aug 7, 2012

I don't have much experience with parcels. We don't subdivide property. But I have to do some Acquisition maps and this is the first time I've had an opportunity to do them in Civil 3D.

I wont get in to the gory detail, but I created some parcels that were very slightly off for rotation. It turned out there were some distance problems too. I thought I would just rotate the parcel based on a couple of known corners and then snap to corners I had from a drawing in the correct system.

Mostly that worked. But now I have a curve that isn't tangent because the far end of one of the tangents was adjusted. Also, somehow, the radius is off. I'm only talking about a couple of thousands of a foot, but I'd like to make it right since it has to be edited anyway. I've tried the parcel editing tools from the ribbon and read some of the sections in help that I thought might apply. I haven't been able to adjust the curve.

So now after all the warm-up, my questions. Can I just erase that curve and use the parcel creation tools to add a new curve? Will that curve automatically be added to the correct parcel? Is there anyway to modify the existing curve to be tangent to the revised lines? IOW What's the best way to proceed?

View 1 Replies View Related

AutoCAD Civil 3D :: Annotative Parcel Labels

Sep 4, 2012

Is there anyway to create parcel labels (or any other kind of C3D label) that are NOT annotative?

C3D v.2012

View 7 Replies View Related

AutoCAD Civil 3D :: Calculating Average Parcel Area

May 16, 2013

Any quick way of calculating average Parcel Area?  I used to export to LandXML and do an area report in CSV.  That doesn't seem to be working for me when I export out of C3D 2012.

The workaround I found was to select all the parcels in Prospector, copy to clip board, paste in excel, find and replace "_Sq. Ft._" with 0, then do the average. 

View 1 Replies View Related

AutoCAD Civil 3D :: User Defined Parcel Properties

Apr 16, 2012

I'm trying to add user defined properties to parcels, and then apply various styles to control shading of parcels, and to display some or all of the user defined data, as applicable depending on the values of that data.

I have managed to create a user defined category within my [User-Defined Property Classification] and then create categories within that classification.

The problem I'm having is that I want to be able to see those classifications in prospector so that I can sort based on those values, and then batch assign styles. How to display the classifications.

View 9 Replies View Related

AutoCAD Civil 3D :: Using 4 Points To Create 4 Lines And 1 Parcel

Sep 18, 2013

I have 4 points (from "Points from file", I created Points #1, #2, #3 and #$ in the non-linear fashion).

1) I want to create 4 straight lines (connecting Pt#1-Pt#2, P#2-P#3, P#3-Pt#4, P#4-P#1) by using some Commands. What Commands in the Command Line should I use to create these 4 straight lines from these 4 points?

2) I want to create 1 parcel (connecting Pt#1-Pt#2-Pt#3-Pt#4-Pt#1) by using some Commands after "Parcel Creation Tools" => Draw Tangent-Tangent with No Curve is clicked.  What Commands should I use in the Command Line to specify these points to form a parcel?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved