AutoCAD Civil 3D :: Parcel Flip Line
Jul 16, 2008I have parcel segments with a PL linetype. One of the segments came in upside down. Is there a way to flip this line without actually manually pulling the pickbox's?
View 8 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Parcel Object Layer Line Under Parcel Style And Plotting
Aug 26, 2013I have a record plat drawing with multiple parcels and parcel styles. For my lands of the grantors I view port froze the lots and right of way layers from my parcel styles. I don’t want to show them in this viewport. To my surprise the lines show up in the object layer we have set for parcels. This was not the case in 2011. We are in 2014 with the first hotfix update. I understand putting the parcel styles in the object layer, but why another mysterious line under it? I did create parcels from objects, but had them erased when I created them. This did not matter either way. Is there a way to get rid of them? I did put them in a new layer, set it to “No Plot” This kept them from plotting, but I really don’t want to have to take the time to do it.
View 6 Replies View RelatedAutoCAD Civil 3D :: Parcel Line / Curve Table
Oct 11, 2013I've created a Line & Curve table to display my metes & bounds. One of the curves is displaying an incorrect length, off by .01. It was caught as my project was reviewed by the city engineer. I went back to the database (Prospector --> Sites --> Parcels) and my mapcheck does conflict by .01.
Why is the mapcheck different from the Line / Curve table? How can I 'fix' the table to match the mapcheck data?
AutoCAD Civil 3D :: Edit Parcel Line Label Style For Precision
Apr 24, 2013I'm trying to edit my label style so that the bearing has no decimal places and the distance has two. I thought it would be similar to editing the contour label precision but it doesn't seem to be that way.
View 3 Replies View RelatedAutoCAD Civil 3D :: Flip / Reverse Line Direction In Profile?
Jun 14, 2012I have a special ditch profile that I'd like to use a linetype with arrows on. Currently, it shows the arrows going up station with my mainline profile. i.e. now water does flow uphill...
How can I flip this line?
AutoCAD Civil 3D :: Parcel Labeling Outside Of Parcel?
Oct 17, 2012When creating and labelling a parcel Autocadd Civil 3d places a label in an adjoining area outside of the intended parcel.
The label seems ubrelated to the intended parcel and is labelled with a diferent parcel number, area, etc.. No additional parcel boundaries seem to be created.
Have created a closed polyline for parcel creation as well as a number of other steps to ensure that there are no breaks in the enclosed parcel.
AutoCad :: Dynamic Block To Flip Circle And Line Leave Text With Attributes
Oct 29, 2008I have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Flip Not Flipping Other Flip
Dec 17, 2012Please take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
AutoCAD Visual LISP / AutoLISP :: Flip Variable / Command Line Won't Recognize After It Loads
Nov 14, 2012I'm trying to make an autolisp that "flips" a third party variable. No luck, command line won't recognize after it loads. I've made similar variable flips that work ??
(defun c:wp (/ wp)
(setq wp (getvar "kti_archt_wallpoche"))
(if (= kti_archt_wallpoche 0)(setvar "kti_archt_wallpoche" 1)
(if (= kti_archt_wallpoche 1)(setvar "kti_archt_wallpoche" 0)
AutoCAD Civil 3D :: Parcel Labels In Layouts
Apr 4, 2013On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
AutoCAD Civil 3D :: Custom Parcel Report
Oct 24, 2012I copied the General Legal Description report and renamed it. When I ran the report, it asked me to save the file Civil.html before opening it. If I run the OOTB report it does not ask me to save the page before opening it. Is this something that I can fix? I have not found a setting anywhere that changes this.
View 1 Replies View RelatedAutoCAD Civil 3D :: Label All Parcel Lines At Once
Apr 27, 2012I need to make a map of a subdivision with all lot dimensions. I see how we can label all the lines of a lot by picking the parcel label, but it only allows one at a time.
View 6 Replies View RelatedAutoCAD Civil 3D :: Parcel Area Not Shown
Oct 21, 2013I am new to C3D and I have been going through all of the tutorials and learning everything I can from the given data, which has been amazingly useful. Everything has been running spot on except today when I was going throughtthe parcels tutorial, I applied Parcel Number and Area to a group of parcels I created via the tutorial dwg file "Parcle-1A". Everything displays correctly except the Area is not shown as it does in the sample pic. I have applied the "Parcel Number And Area" to the Area Label Style, but it still does not display the area. Only the Parcel Number. Is there some part of this process that I am overlooking? The tutorial dwg file is called "Parcel-1A". It was too large to attach, but you can find all of the tutorial dwg files via the Help Menu. It depends on your OS to where they are located.
If you go under Parcels Tutorial>Exercise 1: Creating Parcels from AutoCAD Objects, you can see exactly what I am working with.
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
AutoCAD Civil 3D :: Parcel Table Header
Oct 30, 2013I have a drawing with two parcel tables in it. I would like the header on one to be Line Table 1 and the other Line Table 2, is this possible? When I change the text in the style, the header in both change.
View 2 Replies View RelatedAutoCAD Civil 3D :: Parcel Center Points
Aug 21, 20132014 (COM Preferred)
Are Parcel center points available in the API?
The origin of the Area Label would be ideal.
AutoCAD Civil 3D :: Parcel Preview List
Jan 7, 2014What setting/toggle needs to be turned on to preview the list of parcels in a site? I have a user who clicks on the parcels heading in his site and doesn't see a preview of the list:
Don't deal it as parcel preview when you actually click on the name of the parcel. That I do know how to toggle on. We're just looking for the list.
AutoCAD Civil 3D :: Set Parcel Userdefined Properties From API
Aug 21, 2012I am trying to set the value of the exisitng userdefined property "Address" of Parcels using the com method SetUserDefinedPropertyValue but have had not luck. I have looked at the following help sections but that has not worked.
[URL]
AutoCAD Civil 3D :: Parcel ROW As Corridor Targets
Aug 7, 2011Is there a way to make the parcel ROW as my target with for my corridor?
View 2 Replies View RelatedAutoCAD Civil 3D :: Parcel Style - Name Template
Mar 8, 2012I would like to have my parcels be able to label the lots with sometihng other than the Lot # given by the setup of the parcel itself. What i'd like to be able to do is have it label Outlot A - which I haven't been able to figure out to date.
How can I get the parcel style to use something other than the word Lot or a number (given the typical lot is a number). We have various reasons why Outlot A is a needed label. How does one go about getting C3D to use something other than the name template in parcel style. I can toggle the name template option off once I create the parcel. But, when I toggle it off - then go to the name and change it to Outlot A - the parcel label still shows as Lot 1. Why?
C3D 2011 32bit
Win XP SP3
AutoCAD Civil 3D :: Parcel Segments From Autodesk
Oct 4, 2013C3D 2013 managed dot net..I was hoping to find ParcelLoops as a member of Parcel. But its not. used AECC_PARCEL as dxf selection filter then passed to object type; Autodesk.Civil.DatabaseServices.Parcel
I need to access the parcel boundary segments .. have I used the incorrect object?
AutoCAD Civil 3D :: Edit Parcel Curve
Aug 7, 2012I don't have much experience with parcels. We don't subdivide property. But I have to do some Acquisition maps and this is the first time I've had an opportunity to do them in Civil 3D.
I wont get in to the gory detail, but I created some parcels that were very slightly off for rotation. It turned out there were some distance problems too. I thought I would just rotate the parcel based on a couple of known corners and then snap to corners I had from a drawing in the correct system.
Mostly that worked. But now I have a curve that isn't tangent because the far end of one of the tangents was adjusted. Also, somehow, the radius is off. I'm only talking about a couple of thousands of a foot, but I'd like to make it right since it has to be edited anyway. I've tried the parcel editing tools from the ribbon and read some of the sections in help that I thought might apply. I haven't been able to adjust the curve.
So now after all the warm-up, my questions. Can I just erase that curve and use the parcel creation tools to add a new curve? Will that curve automatically be added to the correct parcel? Is there anyway to modify the existing curve to be tangent to the revised lines? IOW What's the best way to proceed?
AutoCAD Civil 3D :: Annotative Parcel Labels
Sep 4, 2012Is there anyway to create parcel labels (or any other kind of C3D label) that are NOT annotative?
C3D v.2012
AutoCAD Civil 3D :: Calculating Average Parcel Area
May 16, 2013Any quick way of calculating average Parcel Area? I used to export to LandXML and do an area report in CSV. That doesn't seem to be working for me when I export out of C3D 2012.
The workaround I found was to select all the parcels in Prospector, copy to clip board, paste in excel, find and replace "_Sq. Ft._" with 0, then do the average.
AutoCAD Civil 3D :: User Defined Parcel Properties
Apr 16, 2012I'm trying to add user defined properties to parcels, and then apply various styles to control shading of parcels, and to display some or all of the user defined data, as applicable depending on the values of that data.
I have managed to create a user defined category within my [User-Defined Property Classification] and then create categories within that classification.
The problem I'm having is that I want to be able to see those classifications in prospector so that I can sort based on those values, and then batch assign styles. How to display the classifications.
AutoCAD Civil 3D :: Using 4 Points To Create 4 Lines And 1 Parcel
Sep 18, 2013I have 4 points (from "Points from file", I created Points #1, #2, #3 and #$ in the non-linear fashion).
1) I want to create 4 straight lines (connecting Pt#1-Pt#2, P#2-P#3, P#3-Pt#4, P#4-P#1) by using some Commands. What Commands in the Command Line should I use to create these 4 straight lines from these 4 points?
2) I want to create 1 parcel (connecting Pt#1-Pt#2-Pt#3-Pt#4-Pt#1) by using some Commands after "Parcel Creation Tools" => Draw Tangent-Tangent with No Curve is clicked. What Commands should I use in the Command Line to specify these points to form a parcel?
AutoCAD Civil 3D :: Draw Order In Parcel Style
Jul 3, 2012What I want to do is to have an area label where the text background mask obscures linework but does not obscure the parcel fill (hatch). I think it looks bad when you have a light hatch where the background mask cuts a big hole in it.
Usually I would use draw order to do something like this. But since the fill and text are part of one object that won't work. I looked to see if there was any way to affect the order in the Parcel Style but didn't see any.
AutoCAD Civil 3D :: Create Parcel Area Table
Apr 25, 2013To workaround the missing API for creating Parcel Area Tables, I have tried the following:
1. Create a "pick point" selection set (using ObjectARX), containing the Parcel for which I want to create a table.
2. Execute the AddParcelTable command.
3. Programmatically push the Select Parcel-button and the OK button of the Create Table dialog using win32 API.
When the Select Parcel button is pressed, the label next to it displays 1 parcel(s) selected and when the OK button is pressed, Civil prompts the user to pick the upper left corner of the table, but the prompt is immediately interrupted with the message "Invalid 2D point" and the table creation is aborted...
AutoCAD Civil 3D :: Intersect With Function For Alignment And Parcel?
Jul 29, 2012I need to determine intersection points between Alignment and Parcels.
In .NET I haven't Parcel object and in COM IntersectWith function doesn't work.
AutoCAD Civil 3D :: XML Parcel Legal Description Errors
Oct 12, 2010While generating a General Legal Description for Parcels xml report for a parcel with numerous tangent curves, reverse curves and compound curves, the report labels all of them as non-tangent.Also, I write my legal descriptions for curves by citing the bearing and distance OUT to the radius from the beginning of the curve, but the routine gives me the bearing and distance IN from the radius. It is using the code {curveStartDirection}.
Is there a different code I can use that would give me the opposite bearing? Is there some resource that lists all these codes for parcels?
AutoCAD Civil 3D :: Straighten Curved Parcel Segment
Jun 19, 2013Is there a way to straighten a curved parcel segment? IOW Turn the curve in to a straight line.
I thought I has seen this coverd here before. But I can't find it.
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
AutoCAD Civil 3D :: Parcel Area Label Style
Mar 5, 2013I have created a Parcel Area Label Style in code, and also added a text component to the style. The point in adding a text component was to expose a Parcel UDP on the label, but the text component does not display as expected (read: as it displays when the same thing is done in the GUI).
I set the LabelStyleTextComponent.Text.Contents.Value to the same string as I get when I add the Parcel UDP to the text component in the GUI (from the Properties-drop down in the Text Component Editor), but the label then just displays the "template", e.g. "<[My UDP(CP)]>", exactly as it shows in the Editor. When the style and text component is added through the GUI, the label correctly displays the current value of the UDP "My UDP" on the Parcel.
If I go into the Text Component Editor after having added the area label style and it's text component through code, and add the same UDP to the text component (so that it stores the UDP twice), then the label correctly displays the UDP value twice on the Parcel (!). That is, Civil then suddenly realizes it's a UDP.