AutoCAD Dynamic Blocks :: Flip Not Flipping Other Flip
Dec 17, 2012
Please take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
View 5 Replies
ADVERTISEMENT
Jan 27, 2009
I've built this nifty block for holdowns, but the attributes get all goofy on me when I use the flip command. The problem is that the justification of the attributes does not change when they are flipped - so if I modify the text in the attribute while the block is in the FLIPPED state, how to modify the justification?Check out the attached file to see what I'm talking about. The block instances are numbered so you can follow along:
1. block is inserted
2. attribute text is modified in NOT FLIPPED state - everything is dandy
3. block is flipped
4. attribute text is modified in FLIPPED state - text justification is jacked up
5. block is flipped again, in order to demonstrate the continued jacked-uppedness of the attribute
View 9 Replies
View Related
Sep 18, 2013
I am working on a dynamic bi-fold door block. I have added actions that adjust the two leaves of the door to correspond to different opening widths and allow the jamb width to be adjusted. I am now trying to add flip actions in both directions. There is a regular swing door block in the drawing and I want the bi-fold door to have basically the same functionality as the swing door does.
I can't seem to get the angled stretch actions required for adjusting the opening width to work after flipping. I have tried including the stretch actions in the selection set for the flip but it does not seem to work.
View 3 Replies
View Related
Feb 6, 2009
I have been trying to convert my offices blocks to dynamic blocks and this one is giving me a hassle.
Essentially we have a line with an arrow at the end of it to show drainage pathways. I added a multiline attribute so we can add the percentage along the line with a mask. The line, arrow and attribute all need to be able to be aligned perpendicular or tangent to a given line. Everything looks great until the arrow flips sides to work from the other direction and then the text is mirrored backwards.
Mirrtext is set to 0 and I even tried it while in the Beditor to see if there was independent. Multiline or Regular attribute have the same effect as well as if they are locked position or not.
I tried adding a flip, but then the mirrortext settings work just fine and the text won't flip back.
View 5 Replies
View Related
Jul 17, 2011
How i can flip the selection i made without flipping the whole image ?
View 2 Replies
View Related
Mar 20, 2008
When I put a flip option on a text in Dynamic Blocks, during the flipping the text is mirrored. is there any way to preventing this?
View 9 Replies
View Related
Mar 28, 2012
I'm having a small problem with creating a flip state for a dynamic block that has 3 visibility states.
The visible/invisible parts of the block won't flip even though I have created 3 flip states (one for each visibility state) and selected all of the parts of the block I want to flip each time.
View 5 Replies
View Related
Jun 21, 2013
I have created a pretty nice dynamic door block with flip parameters - size changes - and visibility parameters for jamb/no jamb. However I would like to add an option for changing the door from 90 degrees, 45 degrees and closed. I can't use the visibility parameter since I am using that for jamb/no jamb option. I was hoping to add a rotate parameter, but am having issue with the arc line. Is there a way to have the arc move with the swing in the door? If so, I can add that to the more refined door block. I have attached Drawing 2 (Door with just the rotate parameter) and Drawing3 (More refined door dynamic block without the swing option).
View 8 Replies
View Related
Jul 11, 2012
I designed a dynamic block to represent the profile of boreholes, and its different layers (depths, in profile) are linked to the respective description text by a leader.
Problem is when I flip the text with its leader, the tip of the arrow loses contact with the borehole. And as I flip more times, the further it gets from its original position.
View 1 Replies
View Related
Apr 27, 2012
I'm trying to make a dynamic block with attribute text. I've made a FLIP action to it but the text will not follow.
In the Command Window i get this text
Select objects: Specify opposite corner: 16 found
Select objects: 6 unlocked AttDefs filtered from selection.
View 0 Replies
View Related
Jul 24, 2013
I sent the following message to autodesk:
Issue: Dynamic Block causes crash
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
View 1 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Oct 29, 2008
I have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
View 9 Replies
View Related
Jan 30, 2014
I was curious to know if it is possible to flip the orientation of an attribute when using a mirror parameter. I would like to orient my text to the right when I flip it one way and to the left when I flip it the other way.
View 0 Replies
View Related
Jun 27, 2011
A simple dynamic block using a Block Properties Table to control the value of an attribute. The block also has flip & rotate actions, but I cannot get the Block Table grip to flip or rotate with the rest of the block even though it is part of both selection sets.
View 1 Replies
View Related
Oct 26, 2011
I'm trying to make a Dynamic Block for handicap parking spaces (attached).
I have a flip action so that I can switch the direction of the linear array. The problem is when I flip the block, the handicap logo is mirrored (obviously....).
Is there a way to mirror just the location of the logo, instead of mirroring the location AND the logo?
Would it be possible to make a block with the handicap logo and lock the X scale value to 1 ?...
worst comes to worst, i'll remove the flip action and replace it with a rotate action.
View 1 Replies
View Related
May 2, 2011
I am attempting to draw a job where North is pointing down. How can a flip the model space to do this? I am using Autocad LT 2004
View 2 Replies
View Related
May 19, 2012
How do we flip the dimension numbers from one side of the line to another?
My dimension always appears on the left hand side for a vertical line and on the top for horizontal line... Can I make them appear on the bottom or right side?
View 3 Replies
View Related
Jun 11, 2013
I would like to both flip and mirror (or pattern) a feature onto the opposite side of a rectangular extrusion.
For example (assuming a rectangular solid extruded in the Z dimension), I have two counter bored holes on the top surface of the solid aligned with the X axis and I would like a copy of those holes on the bottom surface but aligned with the Y axis. If I pattern the holes rotating them 90 degrees and then attempt to mirror them, I can only select all four or the two originals. Is there any way to disassociate the rotated copies from the originals while still retaining control over their dimensions from a single sketch?
View 3 Replies
View Related
Jul 17, 2012
Why, when I create a plane, I cannot 'flip normal'? There is nothing in the RMB click for it...and I am not sure why. Still there in part...just not assembly. Was it ever?
Alternatively, when I create a plane, is there a way to create with the normal in a direction of my choosing? Never tried to figure this one out cause I always had flip normal...
Inventor 2014 PDS
View 9 Replies
View Related
Jul 16, 2008
I have parcel segments with a PL linetype. One of the segments came in upside down. Is there a way to flip this line without actually manually pulling the pickbox's?
View 8 Replies
View Related
Nov 24, 2011
We have just finished modelling hundreds of pits/manholes in 3d, to import into 12d as required by our current project.
After importing into 12d we have realised that all the faces are back to front as the dark edges are facing outwards, and the light edges are facing inwards on the pits.
Is there a way to globally flip, or perhaps a lisp routine to flip all the faces?
View 0 Replies
View Related
Mar 23, 2012
Is there a way to make multiple object flip on themselves? I would like to find a way to rotate multiple objects, but in actuality I want tmen to stay where they are but just rotate 180 and not based on a base point
View 7 Replies
View Related
Sep 5, 2013
I'm trying to flip an arrow head dimension so that it appears within the two dimension lines pointing outwards. I understand that in previous versions of AutoCAD you could just right click -> flip arrow heads, but this version (AutoCAD Electrical 2014) seems to lack this feature...
View 9 Replies
View Related
Sep 9, 2011
Is there a way to disable the ability to Flip the swing orientation of a door so that a RH inserted door cannot be changed to a LH?
View 2 Replies
View Related
Apr 25, 2012
Just wondering if it possible to flip multiple alignment labels at once or do yo have to pick them individually and then flip?
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
View 6 Replies
View Related
Mar 27, 2012
I have been using AutoCAD mainly doing shopfitting and construction drawings; occasional 3D presentations. Therefore I am clueless as to how to start drawing something like e.g. the flexi-curvey loop of a flip flop in 3D.
View 9 Replies
View Related
Apr 25, 2013
This is noce Made sub assembly everything is good to go. Put in main assembly and flip..
Yeah lets not fixs bugs...
Sub Assembly
Insert in Main Assembly
Nice.. And no i have not constrained it to the main just put it in...
View 1 Replies
View Related
Aug 5, 2010
I am currently working on a template for a belt conveyor, everything works fine, except for one small detail. I have flip states to relocate the drive. The issues im having is IF the drive is flipped before the width of the table is set, the drive does not end up in the proper place.
I have the mirror lines for the flip states stay centered on the table. I know what needs to be done, which is allow the drives to be stretched only when they are in certain locations. Im just not sure how to do this.
Attached is the file. I am currently using AutoCAD 2009 (this would be much easier with Parametric Constraints) (The block needing work is "Drive Table")
View 3 Replies
View Related
Jun 14, 2012
I have a special ditch profile that I'd like to use a linetype with arrows on. Currently, it shows the arrows going up station with my mainline profile. i.e. now water does flow uphill...
How can I flip this line?
View 9 Replies
View Related
Oct 12, 2011
How do you flip a regular left to right profile to read with the 0+00 on the right?
View 7 Replies
View Related
