AutoCAD Civil 3D :: Flip Regular Left To Right Profile To Read With The 0+00 On Right?
Oct 12, 2011How do you flip a regular left to right profile to read with the 0+00 on the right?
View 7 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Flip / Reverse Line Direction In Profile?
Jun 14, 2012I have a special ditch profile that I'd like to use a linetype with arrows on. Currently, it shows the arrows going up station with my mainline profile. i.e. now water does flow uphill...
How can I flip this line?
AutoCAD Civil 3D :: Plan And Profile Sheets Left To Right
Apr 6, 2010I have generated a right to left profile. I use General-create the view frames and they show right to left --good
I use General-create sheets to create the layouts in my current drawing . Rather than being from left to right, it flips my plan view upside down and aligns it on the left side. Is their a viewport setting I don't know about?
AutoCAD Civil 3D :: Left / Right Sample Profile Not Honoring The Gutter
May 2, 2013When creating a profile with right/left samples, the sampled profile does not show the gutter when crossing an intersection. If you do a quick profile of the area, it shows the gutters. See images below...
Sampled profile...
Same area with a quick profile...
Photoshop :: Use Protanopia (Color Blind) Profile As Regular Profile That Can Be Converted?
Sep 30, 2013I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
AutoCAD LT :: Getting Text In Blocks To Always Read Left To Right
Mar 28, 2013I would like to create a block that has an attribute that will always read left to right no matter which method used to rotate the block itself. I know this can be done attaching a rotate parameter to the block and not the attribute, but i want it to also work when using the rotate command.
View 3 Replies View RelatedAutoCAD 2010 :: Get Text To Read Left To Right Always?
Mar 28, 2012I am creating a block that has a single letter included with it. I will need to rotate this block depending on the position within my plan, but I want to keep the label upright and able to be read left to right. I can't seem to find a way to set this preference, does it exist? Or is there a round-about way of doing it? Don't tell me I have to make separate blocks, each oriented a different way to the text stays upright..
View 3 Replies View RelatedAutoCAD .NET :: What Event To Be Used To Read Left Click Mouse Location All The Time
Sep 2, 2011I want to be able to read the left click mouse button coordination all the times . Is it possible ?
View 4 Replies View RelatedAutoCAD Civil 3D :: Viewing Civil Objects In Regular
Aug 30, 2012Right now, the only way I know of being able to see Civil grading objects (surface contours, spot elevations, slopes, etc) while using plain vanilla AutoCAD is to explode everything and export to a lower version.
I'm trying out a trial of AutoCAD 2013 to test things, and my Civil drawing shows up as boxes/text when xrefed into another drawing without doing the task above.
I'm looking for a more efficient way to see grading using AutoCAD (not Civil). Civil is expensive, and I'd like to downgrade the drafters who don't know how to use the Civil functions (and never will), but still need grading to show as a dynamic xref in the background of the drawings they're working on. Problem is, if I have to explode and export my drawing every time I want to update the grading xref in their drawing, it wastes more time than I'd like.
Is this the only way and I have to live with it, or am is there an easier way that I haven't dug up yet? I know I'm not an expert at Civil, so I may be going about this all wrong.
AutoCAD Dynamic Blocks :: Flip Not Flipping Other Flip
Dec 17, 2012Please take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
AutoCAD Civil 3D :: Copy Ribbon Customizations From Regular?
Sep 11, 2012We recently installed Civil 3D on our computers. Some people started working in regular AutoCAD first rather than changing the workspace in Civil 3D. They have customized their ribbons. Is there a way we can copy those customizations and apply them to the 2D Drafting & Annotation workspace in Civil 3D?
View 3 Replies View RelatedAutoCAD Civil 3D :: Copying Pipe Data Into (regular) Table
Jun 6, 2013I want to copy just two pieces of information from a pipe network into a table. I would just generate an automatic pipe table, but those are not editable. Any quick way to copy and paste the pipe lengths and names in a network into a "regular" table?
View 7 Replies View RelatedAutoCAD Civil 3D :: Parcel Flip Line
Jul 16, 2008I have parcel segments with a PL linetype. One of the segments came in upside down. Is there a way to flip this line without actually manually pulling the pickbox's?
View 8 Replies View RelatedAutoCAD Civil 3D :: Unable To Get Back To Regular View From Corridor Section
Aug 31, 2012Edited a corridor section. Hit some button (not sure what) now I can't get back to my regular view. If I select the "Top" view, now all that shows up is one contour, and the top of one cross section, like it's only showing stuff that is at one elevation.
View 1 Replies View RelatedAutoCAD Civil 3D :: Flip Multiple Alignment Labels At Once?
Apr 25, 2012Just wondering if it possible to flip multiple alignment labels at once or do yo have to pick them individually and then flip?
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
AutoCAD Civil 3D :: Profile Geometry Points Of Superimposed Profile To Alignment Label
Mar 1, 2013I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
AutoCAD Civil 3D :: How To Base Structure Profile Label Location On Top Of Profile View
Nov 4, 2013I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedAutoCAD Civil 3D :: Creating Profile Bandsets With More Than 2 Profile / Surface Elevations Shown
Mar 14, 2013Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
AutoCAD Civil 3D :: Editing Profile Style Of Single Profile Instead All Of Profiles?
Mar 5, 2012I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies View RelatedAutoCAD Civil 3D :: Proposed Profile And Existing Surface Not Showing In Profile
Jun 17, 2013I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies View RelatedAutoCAD Civil 3D :: Created Profile From File But Cannot Create Profile Report
Jan 17, 2012I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
AutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command
Feb 28, 2011I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
AutoCAD Civil 3D :: Reloading Xref - Reverse Command To Flip All Linetypes
Aug 2, 2012While working in my topo drawing I used the "reverse" command to flip all my linetypes (water, over head wire, gas) to show correctly. My topo is x referenced into my utility drawing and my x reference lines will not flip. i have reloaded, i have closed and re opened, i have regenerated. No luck...
View 3 Replies View RelatedAutoCAD Civil 3D :: Create Dynamic EOP Profile Based On Cross Slope From Center Line Profile
Jun 28, 2012The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
AutoCAD Civil 3D :: Structures In A Profile View Extending Outside The Profile
Nov 22, 2013I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View - Update
Jul 24, 2012I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
AutoCAD Civil 3D :: Showing Profile Elevation Differences Right Above Profile 2
Jul 17, 2012differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.
So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.
AutoCAD Civil 3D :: Create Proposed Profile From Surface Profile
Mar 17, 2011We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
AutoCAD Civil 3D :: Profile Band / Profile Structure Mask
Jul 9, 2012where to change the text height and color for the lower band where the stations are. Also, how do I get the exist grade and proposed grade to show at the specified stations vertically like LDD used to do it.
Second, how do i mask the pipe in the manholes on the profile. Right now i can see the pipe inside the manhole. I clicked "enable masking" under the structure properties but no luck.
AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View
Nov 28, 2012Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
AutoCAD Civil 3D :: Adding Profile To Existing Profile Views
May 10, 2013I have 3 profiles that I've superimposed together. Then I created sheets using the superimposed profile. I used the wizard and had Civil 3d do it for me (2012). Now I have to add a 4th profile to the mix and get it to show in my profile views that have already been cut. The data is shortcut into the drawing with my cut profiles views. How do I get it to be in the cut profile views without re cutting everything?
View 1 Replies View Related
