AutoCAD Civil 3D :: Flip Multiple Alignment Labels At Once?

Apr 25, 2012

Just wondering if it possible to flip multiple alignment labels at once or do yo have to pick them individually and then flip?

Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450

View 6 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Editing Multiple Alignment Station Offset Labels

Mar 19, 2013

I am trying to edit labels for a particular alignment. All labels are along the same alignment and use the same alignment style. I need to change "defl." in each of those labels to "defl:". So simply changing the period to a colon. But it is a lot of work to go through each label and then in edit label text and then change it. Plus, I have to do this on 12 sheets. That's like 300 labels! Is there a quick way to achieve this. If it were simple mtext or dtext then I could use the find and replace option, but these are civil 3d alignment station offset labels? Is there a lisp that can accomplish this task? I am using Civil 3D 2010.

View 3 Replies View Related

AutoCAD Civil 3D :: Why Does Not Consider Curve Labels As A Part Of Alignment Labels

May 3, 2013

I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ? 

Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc .... 

(aligment by aligment ...... of a whole project ?

Civil 3D (2013)

View 9 Replies View Related

AutoCAD Civil 3D :: Alignment Style Vs Alignment Labels - PI Treated Differently?

Apr 6, 2013

I have a question on Alignment PI's. (Point of Inflection/Intersection)I have an alignment where some PI's have curves, others are merely hard bends.

Is there a way to automatically label the PI's even if they have an associated curve? (I'd like PI, PC and PT)Alternatively, can I only show markers at PI's without curves?

View 9 Replies View Related

AutoCAD Civil 3D :: Reinserting Alignment Labels?

Apr 29, 2009

I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?

View 5 Replies View Related

AutoCAD Civil 3D :: Profile Alignment Labels

Oct 4, 2012

I would live to label the PVI on my Profiles but not show the PVI label at the start and end of my profile. How to set this?

View 1 Replies View Related

AutoCAD Civil 3D :: Where To Set Styles For Alignment Labels

May 2, 2013

I want to add labels for my aligments. (segments or multiple segments)

I dont see any dialog, c3d directly is asking me to click on aligments 

(So I cant choose what styles I want).,

Maybe I have a variable with wrong value ? (Dont show dialog ????) 

Civil 3D (2013)

View 9 Replies View Related

AutoCAD Civil 3D :: Alignment Chainage Labels 420.000 Not 4+20.00

Sep 7, 2013

How do i make my chainages show as 420.000 rather than 4+20.00.I.e I need to take the plus sign out (we never use them - only whole distances) and I need it in 3 decimal places.

View 3 Replies View Related

AutoCAD Civil 3D :: Alignment Labels - Wipeout?

Mar 29, 2012

Is there anyway to place a wipeout behind the station value for an alignment label?

I want it to look like:

---------------------------- 3+00 -------------------------

So i just moved the station with the Y offset variable but now need to get rid of the alignment where the label is.

View 5 Replies View Related

AutoCAD Civil 3D :: Offset Alignment Labels

Apr 29, 2013

Can I offset my alignment labels?

I want to show the alignment staining #'s but I also have a corridor and sample lines running through the stationing that I want to see.  I do not wish to drag every alignment label and then have the leader showing.

View 1 Replies View Related

AutoCAD Civil 3D :: Alignment Labels In Format

Apr 3, 2012

I want the stationing information in display, labels etc to be in the format: x+xxx.xxx. What I get by default is XX+XX.XXX. How can I my desired label format style and lock it?

View 1 Replies View Related

AutoCAD Civil 3D :: Resetting Alignment Tag Labels

Aug 20, 2006

Is there a way to reset the alignment tag (line & curve) labels to begin at 1 when previous labels were created for the alignment and then deleted?

View 6 Replies View Related

AutoCAD Civil 3D :: Upside Down Alignment Labels?

May 15, 2013

I have created an alignment in Civil 3D 2013, from 100+00 to 6740+00 and Station 5040+00 thru 5400+00 are upside down both in the respected drawing and the alignment itself. I have checked and double checked all the settings and they all seem to be correct. This has really got me dumb founded.

View 9 Replies View Related

AutoCAD Civil 3D :: Any Way To Delete Labels Of Particular Alignment

May 2, 2013

Or maybe I have to delete it individually ? Is not an option to "delete alignment labels".

View 9 Replies View Related

AutoCAD Civil 3D :: Set Alignment Labels Layer Automatically?

Sep 27, 2013

Is there a way to set alignment labels layer automatically?

I would like to create a suffix to C-ROAD-TEXT same as to alignment

example:

C-ROAD-Penstock_Option#1

C-ROAD-TEXT-Penstock_Option#1

Because I don't like to have labels of alignment when the alignment is turn off.

View 3 Replies View Related

AutoCAD Civil 3D :: Alignment Labels Not Displaying 2013?

Jan 15, 2013

The major and minor station alignment labels keep disappearing in my drawing.  I've had some luck by removing and re-adding the labels but this has stopped working.  Is this an issue that will be resolved by Service Pack 1?

View 3 Replies View Related

AutoCAD Civil 3D :: Add Increment Alphabetic Labels In Alignment?

Feb 23, 2012

I'm being asked to add a increment alphabetic labels to  my alignment 

ex: A1 A2 A3

View 4 Replies View Related

AutoCAD Civil 3D :: Alignment And Labels Layout Visibility

Jul 10, 2012

I have created an alignment, and have the stationing labels on a different layer than the actual alignment linework. I have frozen the layer with the alignment on it in a viewport, but not the layer with the labels. However, when I regen, the labels disappear. I need to have the labels visible, and the linework off.

View 4 Replies View Related

AutoCAD Civil 3D :: Double Alignment Labels In Table

Jan 7, 2013

I'm trying to add an alignment table, but the curves seem to be labelled twice.  When I first labelled the alignment, the curves were C???, so I tried again.  After a lot of messing around, I finally got C1, C2, etc., but the table lists C1 & then C?.  I've thawed & turned on all the layers, but there aren't any C??? labels on the alignment.  Another alignment in the same drawing worked fine. 

View 4 Replies View Related

AutoCAD Civil 3D :: How To Insert PI / Horizontal Alignment Labels

Jan 8, 2014

I have created a horizontal alignment with labels and would like to label the station at a drive entrance.  Do I insert at that point?  My label then says pi: x+xx.xx.  How do I have it just label the station?

View 6 Replies View Related

AutoCAD Civil 3D :: Weeding Horizontal Alignment PI Labels

Mar 29, 2012

Is there a way to weed the PI lables of an alignment. so that no all vertices are labeled, short of the ctrl-select method?

C3D12-13
Win7x64 6gb

View 2 Replies View Related

AutoCAD Civil 3D :: Adding Profile Elevations To Alignment Labels

May 10, 2010

Is there a way in C3D to add elevation information from a profile to an alignment label? What I'm trying to do is add labels to an alignment in a plan view with elevation information from a profile design associated with that alignment at a particular station. For example, the note would read:

ALIGNMENT B
STA: 12+83.67
ELEV: 435.87

I can't figure out how to add any elevation data to the alignment note. I really don't want to have to create a section and a corridor surface, but that's the only way I can think of right now... and I'm not sure that would actually let me add a station and elevation in the same note in a plan view.

View 9 Replies View Related

AutoCAD Civil 3D :: Xref Alignment Labels Changing Colours

Dec 3, 2013

My alignment ticks use the stanard Aecc Tick block. It is on layer 0/bylayer/bylayer etc and the style is set by layer. They display correctly in the source drawing but when I xref that drawing into others, the ticks change colour based on what every the current layer is in the host drawing. If the current layer is 0 they dispaly correctly, if my current layer has a colour 5 associated with it then my xref ticks regen to blue.  This only happens with the tick not the text.

View 8 Replies View Related

AutoCAD Civil 3D :: Alignment Superelevation Labels In Plan View

Dec 30, 2013

Is there a way of adding superelvation data such as full superelevation cross slope to an alignment curve label in plan view?

In my case we add a label for each horizontal curve with critical curve data such as PI Station, Delta, Degree of Curve, etc... but I can't seem to find a way of adding any superelvation information to the plan view as a label.  Ideally I would like to be able to add the maximum cross slope value and superelevation critical stations to the label.

There is a way of adding the superelevation critical stations a labels to the alignment similar to how PC's or PT's  are labeled, but it does not give the cross slope value.

View 1 Replies View Related

AutoCAD Civil 3D :: Putting Alignment Labels In Paper Space (layout)

Feb 26, 2013

I have a number of problems with alignment labels showing up in layouts that I don't want to show or want to show up differently,.  Is there any way to label an alignment in paper space (layout)?  (or any other type of label).

View 3 Replies View Related

AutoCAD Civil 3D :: Editing Pipe Network - Lost Alignment Labels

Dec 15, 2013

For some reason, while editing my pipe network, my alignment labels for my station offsets have disappeared.  How can I bring them back?

C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit

View 1 Replies View Related

AutoCAD Civil 3D :: Changing Alignment Station Labels To Round To Nearest Number

Aug 21, 2012

I have a roadway alignment and it is ending on 4+50.86, we simply want the alignment end to read on 4+51. is it possible to make this happen?

View 4 Replies View Related

AutoCAD Civil 3D :: Synchronizing Data Shortcuts Breaks Reference To Alignment In Profile Labels

Sep 6, 2013

I have some storm sewer alignments that I've put into profiles in C3D 2011.  The pipe network that I used to create the alignments from is a reference created from a data shortcut.   I've created profiles of these storm sewer alignments, and the station labels for the storm structures are displayed at question marks until I go into the structure properties for each structure and link it to the correct alignment.  

The problem is that whenever I synchronize my data shortcuts because someone has updated something, all of the links in each structure to the alignments disappears and I am back to? for my stations in the profiles and I have to go go fix it again. how to keep this from breaking?

I do see this recent message [URL]  that appears to be a similar problem, but it was said in that thread that this problem was introduced with C3D 2012, but I am using C3D 2011.....

View 4 Replies View Related

AutoCAD Civil 3D :: Multiple Cross Section Labels?

Jan 31, 2013

Using 2011 - Having trouble with cross section labeling.  I have multiple label markers such as ROW, and multiple EASEMENT types.  I've created corridors for each label type - each will show up if their corridor has a corridor section line at the same station as the base corridor, but at odd ball stations (like driveway openings)  the labels do not show up, I'm thinking its because I don't have these corridor section lines in each corridor.  Is there an easier work around rather than manually adding the section lines in each corridor?

View 3 Replies View Related

AutoCAD Civil 3D :: Line Label Macro For Multiple Labels

Apr 12, 2013

Is there a way to create a macro to label a line with a particular style?

I label my feature lines with three styles: multiple - segment grade, multiple - segment start elevation & single - segment end elevation. I want to make a macro for each of these that I can put on a button. It would be nice to combine the two multiples too if that is possible.

Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600

View 2 Replies View Related

AutoCAD Civil 3D :: Multiple Data Shortcuts For Same Alignment?

Jan 25, 2011

For some reason when I try to "Create Reference" to bring in my Alignment, Finished Ground and Existing Ground I get three different alignment data shortcuts instead of them grouping into one. I am trying to find out where in my workflow this all went wrong.

I have a .dwg that just has my alignment files in it. Then I make a new drawing and data shortcut in those alignments and Surface. I make my profiles and then create the data shortcuts for those. I start a New drawing and try to reference the alignment and profile and I get duplicated that aren't grouped. If you take a look at the two .bmp's you can see what happens.

The Purple highlighted area is how I want it to show up and that one worked just fine. Same work flow. The yellow is what is giving me a hard time.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved