I'm trying to add an alignment table, but the curves seem to be labelled twice. When I first labelled the alignment, the curves were C???, so I tried again. After a lot of messing around, I finally got C1, C2, etc., but the table lists C1 & then C?. I've thawed & turned on all the layers, but there aren't any C??? labels on the alignment. Another alignment in the same drawing worked fine.
View 4 Replies
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
I have a question on Alignment PI's. (Point of Inflection/Intersection)I have an alignment where some PI's have curves, others are merely hard bends.
Is there a way to automatically label the PI's even if they have an associated curve? (I'd like PI, PC and PT)Alternatively, can I only show markers at PI's without curves?
Using 2012 in my CUI I could set the general note label to use the double click function. When I double clicked on any label I'd get the editor box pop up. Now in 2013 for some strange reason that no longer seems to work.
View 9 Replies View RelatedI accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?
View 5 Replies View RelatedI would live to label the PVI on my Profiles but not show the PVI label at the start and end of my profile. How to set this?
View 1 Replies View RelatedI want to add labels for my aligments. (segments or multiple segments)
I dont see any dialog, c3d directly is asking me to click on aligments
(So I cant choose what styles I want).,
Maybe I have a variable with wrong value ? (Dont show dialog ????)
Civil 3D (2013)
How do i make my chainages show as 420.000 rather than 4+20.00.I.e I need to take the plus sign out (we never use them - only whole distances) and I need it in 3 decimal places.
View 3 Replies View RelatedIs there anyway to place a wipeout behind the station value for an alignment label?
I want it to look like:
---------------------------- 3+00 -------------------------
So i just moved the station with the Y offset variable but now need to get rid of the alignment where the label is.
Can I offset my alignment labels?
I want to show the alignment staining #'s but I also have a corridor and sample lines running through the stationing that I want to see. I do not wish to drag every alignment label and then have the leader showing.
I want the stationing information in display, labels etc to be in the format: x+xxx.xxx. What I get by default is XX+XX.XXX. How can I my desired label format style and lock it?
View 1 Replies View RelatedIs there a way to reset the alignment tag (line & curve) labels to begin at 1 when previous labels were created for the alignment and then deleted?
View 6 Replies View RelatedI have created an alignment in Civil 3D 2013, from 100+00 to 6740+00 and Station 5040+00 thru 5400+00 are upside down both in the respected drawing and the alignment itself. I have checked and double checked all the settings and they all seem to be correct. This has really got me dumb founded.
View 9 Replies View RelatedOr maybe I have to delete it individually ? Is not an option to "delete alignment labels".
View 9 Replies View RelatedJust wondering if it possible to flip multiple alignment labels at once or do yo have to pick them individually and then flip?
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
Is there a way to set alignment labels layer automatically?
I would like to create a suffix to C-ROAD-TEXT same as to alignment
example:
C-ROAD-Penstock_Option#1
C-ROAD-TEXT-Penstock_Option#1
Because I don't like to have labels of alignment when the alignment is turn off.
The major and minor station alignment labels keep disappearing in my drawing. I've had some luck by removing and re-adding the labels but this has stopped working. Is this an issue that will be resolved by Service Pack 1?
View 3 Replies View RelatedI'm being asked to add a increment alphabetic labels to my alignment
ex: A1 A2 A3
I have created an alignment, and have the stationing labels on a different layer than the actual alignment linework. I have frozen the layer with the alignment on it in a viewport, but not the layer with the labels. However, when I regen, the labels disappear. I need to have the labels visible, and the linework off.
View 4 Replies View RelatedI have created a horizontal alignment with labels and would like to label the station at a drive entrance. Do I insert at that point? My label then says pi: x+xx.xx. How do I have it just label the station?
View 6 Replies View RelatedIs there a way to weed the PI lables of an alignment. so that no all vertices are labeled, short of the ctrl-select method?
C3D12-13
Win7x64 6gb
Is there a way in C3D to add elevation information from a profile to an alignment label? What I'm trying to do is add labels to an alignment in a plan view with elevation information from a profile design associated with that alignment at a particular station. For example, the note would read:
ALIGNMENT B
STA: 12+83.67
ELEV: 435.87
I can't figure out how to add any elevation data to the alignment note. I really don't want to have to create a section and a corridor surface, but that's the only way I can think of right now... and I'm not sure that would actually let me add a station and elevation in the same note in a plan view.
My alignment ticks use the stanard Aecc Tick block. It is on layer 0/bylayer/bylayer etc and the style is set by layer. They display correctly in the source drawing but when I xref that drawing into others, the ticks change colour based on what every the current layer is in the host drawing. If the current layer is 0 they dispaly correctly, if my current layer has a colour 5 associated with it then my xref ticks regen to blue. This only happens with the tick not the text.
View 8 Replies View RelatedIs there a way of adding superelvation data such as full superelevation cross slope to an alignment curve label in plan view?
In my case we add a label for each horizontal curve with critical curve data such as PI Station, Delta, Degree of Curve, etc... but I can't seem to find a way of adding any superelvation information to the plan view as a label. Ideally I would like to be able to add the maximum cross slope value and superelevation critical stations to the label.
There is a way of adding the superelevation critical stations a labels to the alignment similar to how PC's or PT's are labeled, but it does not give the cross slope value.
I am trying to edit labels for a particular alignment. All labels are along the same alignment and use the same alignment style. I need to change "defl." in each of those labels to "defl:". So simply changing the period to a colon. But it is a lot of work to go through each label and then in edit label text and then change it. Plus, I have to do this on 12 sheets. That's like 300 labels! Is there a quick way to achieve this. If it were simple mtext or dtext then I could use the find and replace option, but these are civil 3d alignment station offset labels? Is there a lisp that can accomplish this task? I am using Civil 3D 2010.
View 3 Replies View RelatedI have a number of problems with alignment labels showing up in layouts that I don't want to show or want to show up differently,. Is there any way to label an alignment in paper space (layout)? (or any other type of label).
View 3 Replies View RelatedFor some reason, while editing my pipe network, my alignment labels for my station offsets have disappeared. How can I bring them back?
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
I want to be able to make a alignment table with northing and easting coordinates for the following:
bop
pi's
eop
Is this possible? The closest I get is to make a curve table with the pi coordinates and no bop or eop coord'.
Civil 3D 2014
Win 7
It is possible to create a table for an alignment as shown in the example attached?
View 1 Replies View RelatedI have a roadway alignment and it is ending on 4+50.86, we simply want the alignment end to read on 4+51. is it possible to make this happen?
View 4 Replies View RelatedIf there was any way to get deflection angles of an alignment into a table? I finally figured out how to get C3D to label them using the add note label. If this is not possible, is there a way to make a table of the notes? I am using C3D 2013 version if it makes any difference.
View 4 Replies View Related
