AutoCAD Civil 3D :: Editing Pipe Network - Lost Alignment Labels

Dec 15, 2013

For some reason, while editing my pipe network, my alignment labels for my station offsets have disappeared.  How can I bring them back?

C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit

View 1 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Pipe Network Labels

Mar 22, 2012

I have multiple profile views with a pipe network. In a number of cases, I have a pipe that extends to the end of one profile view and continues on the next. I can label the pipe on one profile but not on the other. Is there a way to add two labels to the same pipe - one label on one profile view and another label on the other profile?

View 2 Replies View Related

AutoCAD Civil 3D :: Profile Pipe Network Labels

Jun 19, 2013

If I have a pipe that spans between two profile views, is there a way to label the pipe in each profile view with only the lineal feet that is showing in that profile view?

View 4 Replies View Related

AutoCAD Civil 3D :: Pipe Network Lost Grips

May 18, 2012

I’m having problems editing my pipe network in Civil 3D 2012, as you can see below some of the network parts have all the grips after editing while some of the pipes can only be edited once before I lose the grips. I have tried purge/audit, recover and the bug fix for sp1 that caused pipes to disappear.

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Network Cross Section Labels In 2012?

Dec 29, 2011

In 2011 the pipe network cross section labels had to be exploded or they would disappear once you closed the drawing (even with saving).

In 2012 can you close and open a drawing and have the labels not disappear?

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post

View 3 Replies View Related

AutoCAD Civil 3D :: Assign Reference Alignment To Pipe Network?

Mar 2, 2013

is there any quick way to assign reference aligment to pipe network parts?

I use practise to create one pipe network and afterwards i expand my pipenetwork by editing with lots of aligments (create aligment from network part function i use). Bur there occur a problem in my profile view, when i want to represent station value of aligment and there is now reference aligment in pipe part.

View 1 Replies View Related

AutoCAD Civil 3D :: Lock Alignment Data To Pipe Network

Aug 4, 2011

is it possible to lock an alignment to a pipe network, so that if you move a structure, the alignment moves with it?

along those same lines, when you create an alignment from a pipe network, is it possible to auto assign the reference alignment to the pipe parts, so that labels come out correctly?

View 4 Replies View Related

AutoCAD Civil 3D :: Change Pipe Network Reference Alignment Or Surface

Dec 14, 2009

I want to change the reference surface for a pipe network with existing pipes and structures. however the changes will only affect new objects, I have to manually change the others one by one. Even with the vista open I can select multiple structures, but when I click in the reference surface column of one of the selected structures, all the others are deselected.

View 6 Replies View Related

AutoCAD Civil 3D :: Plan Production - Pipe Network Profile Labels Are Missing In Sheets

May 6, 2012

In plan production, I have created the sheets (plan & profile) as a seperate drawing. 

when I open the sheets, the pipe network profile labels are missing in model & paper space. (attachment 01)

I tried to on/off the annotation visibility tabs in the lower right corner (attachement 03)

Note: While creating the sheets, I select the tabs for pipe network & copy pipe network labels to destination drawings (attachment 02).

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Network Structure Editing

Mar 19, 2012

I am using a structure table as a workaroumnd to get a dynamic point tab;e that also shows station offset. It shows Name, N, E, Elev, Sta, OS

I want the elevation shown in the table to be the elevation that was pulled from the specified surface when I set the structures, PLUS 2 inches.

I tried making them all Null Structures, but I am unable to edit the height of the structure - it wants to be 1.467 and won't change.

I am not even sure what i am doing since I don't use pipe stuff all that often.

My machine is hung on the Edit Networks part dialog, which I *think* is where I was trying set the height of a structure.

I tried creating a new structure and it wants half a million parameters for a simple cylinder, even though the ONLY thing I care about is the insertion point and adding 2 inches for the table.

C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12

View 2 Replies View Related

AutoCAD Civil 3D :: Editing Labels And Pipe Networks

Aug 15, 2013

On my drawings when I want to edit a label, I click the label, the ribbon changes and gives me options for that label, I click "edit label group" then a dialog box for that label style pops up and gives me more options.

Same drawings on another employees workspace, after clicking the label the ribbon changes, "edit label group" is selected from the ribbon, the command line then asks to pick a label you would like to edit even though you already selected a label. 

What is the issue here? Does a system variable need to be set to "1" instead of "0" somewhere?

View 2 Replies View Related

AutoCAD Civil 3D :: Editing Multiple Alignment Station Offset Labels

Mar 19, 2013

I am trying to edit labels for a particular alignment. All labels are along the same alignment and use the same alignment style. I need to change "defl." in each of those labels to "defl:". So simply changing the period to a colon. But it is a lot of work to go through each label and then in edit label text and then change it. Plus, I have to do this on 12 sheets. That's like 300 labels! Is there a quick way to achieve this. If it were simple mtext or dtext then I could use the find and replace option, but these are civil 3d alignment station offset labels? Is there a lisp that can accomplish this task? I am using Civil 3D 2010.

View 3 Replies View Related

AutoCAD Civil 3D :: Editing Pipe Size In Existing Network Parts List

Jan 7, 2013

I am using C3D 2012. I have a pipe network catalog located on our office network server. I have a pipe size shown as 15" that is incorrect, it should read and label the pipe as 16" (see attached image). I don't know a lot of the workings how to edit this from 15 to 16 inch and what I need to do to get it correct for the other C3D users in the office.

View 1 Replies View Related

AutoCAD Civil 3D :: Default Pipe Network Layer (Not The Structures Or Pipes The Network)

Dec 7, 2012

I am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).

For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.

The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.

While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?

P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost

"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."

View 9 Replies View Related

AutoCAD Civil 3D :: Why Does Not Consider Curve Labels As A Part Of Alignment Labels

May 3, 2013

I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ? 

Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc .... 

(aligment by aligment ...... of a whole project ?

Civil 3D (2013)

View 9 Replies View Related

AutoCAD Civil 3D :: Pipe Network Storm Sewer Pipe Plan View

Nov 20, 2013

Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently.  We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.

View 1 Replies View Related

AutoCAD Civil 3D :: Edit Pipe Network - How To Trim Pipe That Pass Through Manhole

Sep 25, 2012

I created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.

View 1 Replies View Related

AutoCAD Civil 3D :: Alignment Style Vs Alignment Labels - PI Treated Differently?

Apr 6, 2013

I have a question on Alignment PI's. (Point of Inflection/Intersection)I have an alignment where some PI's have curves, others are merely hard bends.

Is there a way to automatically label the PI's even if they have an associated curve? (I'd like PI, PC and PT)Alternatively, can I only show markers at PI's without curves?

View 9 Replies View Related

AutoCAD Civil 3D :: Connecting Pipe To Different Pipe Network Structure

Jun 20, 2012

Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D

View 6 Replies View Related

AutoCAD Civil 3D :: Pipe Network Not Showing Up?

Apr 10, 2013

I have lost the ability to create a pipe network in a single drawing. Sorta. I can create a pipe network, and label it, and see it in my toolspace, but it won't display it for any style in any format. I can bring in a data reference and label those, but can not see pipe or structure outlines or anything to that end. I have tried to recover, audit, purge. I am at the end, currently creating the pipe network, data referencing it in, and then just drawing lines between the labels.

View 9 Replies View Related

AutoCAD Civil 3D :: Pressure Pipe Network

Jan 16, 2013

I have created a pressure pipe network (Plan view) from own created pipes and fittings, try to create an alignment from the network but C3D tells me that the selected network part has no connected parts?

How would I connect the network in order to create an alignment? (the pipe network has got a command to do that)

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Network Labeling

Jun 11, 2013

I have a drainage model, the data for which has been imported from microdrainage into Civil3d (.sws file) .

The engineer working on the project is playing around with the Invert and Cover levels so I reload the same updated .sws file into my model almost daily expecting the information shown in the labels of the pipes and manholes to simply change. Instead mine seem to disappear and I have to relabel the whole network again.

This wouldn't be much of a problem because labeling only takes a few minutes but with this particular scheme, the client wants the labels shown in a box with a leader. When I relabel, the boxes automatically snap to the center of the manholes without a leader and i then have to drag each one away from the manhole to get the leader to show up.

View 7 Replies View Related

AutoCAD Civil 3D :: Reinserting Alignment Labels?

Apr 29, 2009

I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?

View 5 Replies View Related

AutoCAD Civil 3D :: Profile Alignment Labels

Oct 4, 2012

I would live to label the PVI on my Profiles but not show the PVI label at the start and end of my profile. How to set this?

View 1 Replies View Related

AutoCAD Civil 3D :: Where To Set Styles For Alignment Labels

May 2, 2013

I want to add labels for my aligments. (segments or multiple segments)

I dont see any dialog, c3d directly is asking me to click on aligments 

(So I cant choose what styles I want).,

Maybe I have a variable with wrong value ? (Dont show dialog ????) 

Civil 3D (2013)

View 9 Replies View Related

AutoCAD Civil 3D :: Alignment Chainage Labels 420.000 Not 4+20.00

Sep 7, 2013

How do i make my chainages show as 420.000 rather than 4+20.00.I.e I need to take the plus sign out (we never use them - only whole distances) and I need it in 3 decimal places.

View 3 Replies View Related

AutoCAD Civil 3D :: Alignment Labels - Wipeout?

Mar 29, 2012

Is there anyway to place a wipeout behind the station value for an alignment label?

I want it to look like:

---------------------------- 3+00 -------------------------

So i just moved the station with the Y offset variable but now need to get rid of the alignment where the label is.

View 5 Replies View Related

AutoCAD Civil 3D :: Offset Alignment Labels

Apr 29, 2013

Can I offset my alignment labels?

I want to show the alignment staining #'s but I also have a corridor and sample lines running through the stationing that I want to see.  I do not wish to drag every alignment label and then have the leader showing.

View 1 Replies View Related

AutoCAD Civil 3D :: Alignment Labels In Format

Apr 3, 2012

I want the stationing information in display, labels etc to be in the format: x+xxx.xxx. What I get by default is XX+XX.XXX. How can I my desired label format style and lock it?

View 1 Replies View Related

AutoCAD Civil 3D :: Resetting Alignment Tag Labels

Aug 20, 2006

Is there a way to reset the alignment tag (line & curve) labels to begin at 1 when previous labels were created for the alignment and then deleted?

View 6 Replies View Related

AutoCAD Civil 3D :: Upside Down Alignment Labels?

May 15, 2013

I have created an alignment in Civil 3D 2013, from 100+00 to 6740+00 and Station 5040+00 thru 5400+00 are upside down both in the respected drawing and the alignment itself. I have checked and double checked all the settings and they all seem to be correct. This has really got me dumb founded.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved