We have just finished modelling hundreds of pits/manholes in 3d, to import into 12d as required by our current project.
After importing into 12d we have realised that all the faces are back to front as the dark edges are facing outwards, and the light edges are facing inwards on the pits.
Is there a way to globally flip, or perhaps a lisp routine to flip all the faces?
Any program or routine in lisp or net that can select a group of 3d polylines in the form of a tin and convert them all to 3d faces?
I know that I can take the 3d polylines and explode them to 3d lines. Then I can use map clean to delete the duplicate lines. Then I can create a C3D surface using the 3d lines. Then I can extract 3d faces from the surface.
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
I have a lisp routine and I keep getting NIL. I want it to draw a door and I want to be able to move it.
(defun c:door ()
(DEFUN dtr (A)
(* PI (/ A 180.0)))
(setvar "CMDECHO" 0)
(DEFUN INFO ()
(setvar "OSMODE" 0)
[code]....
I put mleader into a LISP routine and it is doing the text attached to it only in the command line instead of in the drawing is ther a way to put mleader into a LISP routine and have it do the same as when you just type in mleader?
View 2 Replies View RelatedWe are moving from AutoCAD Map 3d ver 10 to ver 11. There's a lisp routine I use all the time and it doesn't seem to want to work in the newer version 11. this routine is supposed to fill but like I said doesn't work in ver. 11.
View 1 Replies View RelatedBasically, the routine asks for the user to choose the hatch type (Retirer/Percer), then the layer (Defpoints/Select/Current) and finaly the type of the object to draw (Polyline/Rectangle). My original routine has also a Circle and a Boundary options, and an Error trap to reset the variables but I will keep it simple for the purpose of my issue.
So, my issue is: when I choose the type of object to draw, it draws just one of it and the routine ends. I would like to have something that "says" to the routine that I want to keep drawing that object (Polyline or Rectangle) and putting the hacth inside until I do enter and then the routine goes to its end.
Lisp routine for creating item balls with an arrowhead and a one to two digit number in the balloon?
View 7 Replies View RelatedI am using a fairly old Lisp to generate section arrows, started using this in 2000 and up until 2011. Since we have installed 2012 the routine does not work correctly, after inserting block with attributes instead of bringing up dialogue box it inserts next line of string in to the dialogue box. I have attached lisp routine and blocks
View 6 Replies View RelatedI have created an acad.lsp file in where I want to arrange all our company settings. I've stored it on the network to make sure everyone will use the same one and when updates take place I don't have to run past all pc's to change it. I've set everything in the deployment package but users can still change it when they reset their profile. Plus some pc's are already installed with AutoCAD before creating the lisp routine, how can I enforce the support directory to check on the network for the acad.lsp each time?
View 9 Replies View Relatedwith the mouse I can select objects on the screen and then start a command that uses these objects.
How can I perform this in lisp?
I can create my selection set, that's no problem, but how can I 'make it active' for an external function?
(ssget "_C" p0 p1 '((0 . "TEXT")))
???
(c:txtexp)
Easy way (or LISP routine) to do radial line hatching in AutoCAD 2006. What I mean is the ability to hatch an object, such as a ring (or doughnut) such that the hatching lines are in between the two rings, and are all perpendicular to the circle. Even better would be a generic routine to allow hatch lines to follow arcs (but that would be dreaming too big for now). Perhaps there is some sort of sweep technique that could be exploded into lines? All I need are the lines, actually.
View 2 Replies View RelatedI have got points from a GIS software into AutoCAD, the problem is that I am unable to draw a polyline between the points to get a distance between the points. Anu lisp routine which can convert the points to make them selectable. I have attached the drawing I am working on for those of you who want to have a go at this one.
View 3 Replies View RelatedWe are trying to update our company logo on hundreds of autocad drawings, lisp routine or a better way to get this update.
View 5 Replies View RelatedI'm looking for a lisp routine that allow me to select a text object that is rotated to anything other than zero, and it will change the text object to zero rotation and while still in the command allow me to place the text object on the screen.
I have a routine that is similiar called RT180 but it just rotates whatever text object you select 180 degrees from its current rotation, but I can not figure out how to modify it to rotate to zero rotation angle. What I like about RT180 is that you select your text it rotates it on the spot and then lets you pick a spot to place it.
I want autolisp program to check overlap like in closed or open polyline with any other entity in the drawing, whether other entity is overlapping inside the polyline or not, i am beginner in autolisp and want to know exactly which functions are used or the program itself Also if possible to check circular overlap of one polyline with itself.
View 1 Replies View RelatedLISP routine for rotating lines so that text in linetypes always reads from left to right?
I use the QUERY command to create basemaps and often the lines that are imported read upside down or backwards or however you prefer to look at it. Most often, if I look at the XY coords of these backwards lines, the End X coordinate is of a higher value than the Start X coordinate.
Looking for something that would compare the two X coordinates of a line, do some sort of an IF Start X > End X, and if its true, store the XYZ coords of the Start and End in some variable, and swap them.
I am looking for a routine that will replace all blocks named "DgnMisc_nodepoleind" with a block named "DgnMisc_nodepoleind2" keeping the insertion point. I could use (command "-insert" "DgnMisc_nodepoleind=Y:/ACAD2007/DA settings/Library_new_scale1/DgnMisc_nodepoleind2.dwg" NIL ) but my problem is that the block I want to replace is used on two different layers and I only want to replace the ones on layer "TPSYM01".
View 3 Replies View RelatedI found a lisp routine on the internet to change page setups on multiple layouts. The lisp worked but on some of the layouts it moved the viewport off the paper background (see attached). The layouts print fine but the only way to get the viewport back on to the background is to open the page setup and click modify, then ok and close. I tested this on a .dwg that I had saved to my computer rather than on one in the main folder but I would like to do this to to all are maps since our IT decided to rename our printer and now all pages setups are no good.All I know about lisp is how to run one.
;; Copy current layout page setup to all layout tabs
(vl-load-com)
(defun c:CPS (/ Adoc Layts clyt)
(setq aDoc (vla-get-activedocument (vlax-get-acad-object))
Layts (vla-get-layouts aDoc)
clyt (vla-get-activelayout aDoc)
)
(foreach
itm
(vl-remove (vla-get-name clyt) (layoutlist))
(vla-copyfrom (vla-item Layts itm) clyt)
)
(princ)
)
I have a lisp routine:
(defun getLayout (pos / result cLayout layouts^ i len)
; pos = -1 return previuous layout name
; pos = 0 return current layout name
; pos = 1 return next layout name
(cond
((zerop pos)
(setq result (getvar "ctab"))
); case
[code]...
which basically returns either the current, previous or next tab name depending on what you call up. Any way to link this lisp to a field? I am doing some plan and profile drawings which contain match lines I would like to have the match line text automated. For example if I'm on layout called PP02 there would be two match lines in the drawing one would read MATCH LINE PP01 and the other would read MATCH LINE PP03 this lisp routine returns the correct variable but how do I loink this to a fiels?
I cannot get my lisp routine to run when I batch plot in AutoCAD 2014. It's loaded into the startup suite and runs when I open the individual drawings but not during a batch plot. How can I get this to run during a batch plot?
View 9 Replies View RelatedLISP routine that can create multiple paper space layout tabs and can name them incrementally.
View 4 Replies View RelatedI don't do a lot of programming and when I do it is mostly with older lisp commands. I have routine that works in 2010 but we are switching to 2013 and it doesn't work. The routine assigns the area of a polyline to a field. The portion of the routine that isn't working is where it assigns the object id for the polyline. Here is that portion of the routine:
;; select an object
(if (setq ent (entsel))
(progn
(setq ent (car ent))
;; Check to see if object selected is a polyline
(if (= (cdr (assoc 0 (entget ent))) "LWPOLYLINE")
(progn
;; obtain the object id from the selected entity
(setq objID (vla-get-objectid (vlax-ename->vla-object ent)))
Any lisp routine that will remove "phantom parcels" in a drawing? They are the parcels many topics on this discussion forum have topics on, that can be selected but can't be deleted by any simple means.
The drawing is relatively new...with minimal objects in it. Just some Feature Lines and 3D Polylines. I have Sites in my drawing...but no parcels. Only thing in the sites are the feature lines. When I do a Q SELECT for the parcels it selects and highlights my feature lines, which is weird.
I have created a lisp routine that I would like to share with other CAD users, but it doesn't work on the server, and it works fine on my machine. Does "findfile" function work on a server environment?
View 4 Replies View RelatedI am looking for a LISP to automatically rename all my layouts. I would like the first layout to say "HWY 400 (01)", second layout "HWY 400 (02)", third layout "HWY 400 (03)" ect..
View 4 Replies View RelatedI need a routine that one can select a fence or a path along a whole lot of contours which are not in 3DPoly but rather a heavyweight POLYLINE and then have the Z value (elevation of this polyline) printed over the contour preferably along the direction of the vertex picked.
I have something right now that works by selecting individual plines but I need one you can select a whole lot and have the text inserted at the correct position.
See my simple code below:
;THIS IS FOR LABELLING 3D CONTOURS
(defun C:3DC ()
(graphscr)
(setq p (entsel "
Select CONTOUR to label: "))
(setq e (entget (car p)))
(setq e1 (entget (entnext (cdr (assoc -1 e)))))
[code]....
I'm trying to make a LISP routine that will match point style, label style, marker rotation, label rotation and layer for a selected point to multiple other points. I don't know what the exact variable names are or how to find them.
See the post below for code that is similar too what I'm looking for.
[URL]......
is there a command or even does any lisp routine to select a line and evenly divide it in to however sections you want?
View 9 Replies View RelatedI recently upgrading to ACA 2014. I have set my trusted locations, my file path, the startup suite, and the system variable to load acad.lisp on startup. Most of my lisp routines load, but not all. I still have my ACA 2011 loaded, all settings are applied as required, yet I do not have the same issue with the same lisp routines. I have to reload my lisp routines for every drawing.
View 7 Replies View RelatedI'm trying to create a lisp routine where It will create a layer for the delta that is needed and at the same time adds the delta. I get delta revisions often and it takes time to add a new layer and a new delta for each plan. I would like to create a routine that creates the the new layer based on the revision number.
For example if I get a revision 2 I would like to have a lisp routine that creates a new layer but asks what number i would like to use, once the new layer gets created the revcloud command would run, I use polylines around my revisions then change them to cloud with the revcloud command. after i pick my polylines to be changed to clouds then it would add a delta block that is in an attribute and it lets me put the number of the revision i want. At the end I would have a new layer, a cloud around my revision and a delta corresponding to the revision number i'm currently working with.
I have a routine that creates the new layer, sets it current, and starts the revcloud command where i can pick the objects to change to clouds, after that I'm stuck, I'm not sure how to tell AutoCAD that after the selection is made to start the insert command to insert that delta attribute block. I mean the routine ends after i pick my objects, I tried doint the delta first but i ran into the same issue since my routine ends after AutoCAD ask me to pick a location to put my delta block.
I need to figure a way to tell AutoCAD that after something is picked or selected then to continue with the lisp routine without ending it. I atteched an example of what I have.