AutoCAD Inventor :: Mirror And Flip A Feature
Jun 11, 2013
I would like to both flip and mirror (or pattern) a feature onto the opposite side of a rectangular extrusion.
For example (assuming a rectangular solid extruded in the Z dimension), I have two counter bored holes on the top surface of the solid aligned with the X axis and I would like a copy of those holes on the bottom surface but aligned with the Y axis. If I pattern the holes rotating them 90 degrees and then attempt to mirror them, I can only select all four or the two originals. Is there any way to disassociate the rotated copies from the originals while still retaining control over their dimensions from a single sketch?
View 3 Replies
ADVERTISEMENT
Jul 6, 2012
Is it possible to create feature A mirror it to create feature B and suppress feature A without suppressing or crashing feature B? What I have are very complicated left hand and right hand features. I could create the B feature again but there are a lot of dimensions. I could mirror the sketch, but there are formulas controlled by iLogic in them, and mirroring a sketch seems to break those formulas and I only get the dimension.
If it is not possible it would be an excellent addition to 2014!
View 5 Replies
View Related
Nov 17, 2011
I need to mirror a feature to the opp side of a part, then supress the parent feature. Can this be done?
View 5 Replies
View Related
Jun 18, 2012
I select the mirror command, but it will not select the lofted feature. All of the extruded features will select just fine.
View 5 Replies
View Related
Jul 31, 2012
A few versions back I had what I remember as being an action to mirror and flip an image. I realize this can be done manually or create my own action but it was a great action and produced some really amazing images in no time. Any action or even a plug in that does this?
View 2 Replies
View Related
Sep 10, 2013
There was a video that showed you how to create the mirror effect that USED to be the "flip" for PSP. The video I am referring to, it showed how to do it as a script, and then customize it with a shortkey, and finally, it showed you how to add it to the menu (I had it under "Images", just above Flip Horizontally, Flip Vertically).
View 5 Replies
View Related
Dec 17, 2012
Please take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
View 5 Replies
View Related
Jul 17, 2012
Why, when I create a plane, I cannot 'flip normal'? There is nothing in the RMB click for it...and I am not sure why. Still there in part...just not assembly. Was it ever?
Alternatively, when I create a plane, is there a way to create with the normal in a direction of my choosing? Never tried to figure this one out cause I always had flip normal...
Inventor 2014 PDS
View 9 Replies
View Related
Apr 25, 2013
This is noce Made sub assembly everything is good to go. Put in main assembly and flip..
Yeah lets not fixs bugs...
Sub Assembly
Insert in Main Assembly
Nice.. And no i have not constrained it to the main just put it in...
View 1 Replies
View Related
Apr 23, 2013
I want to mirror cut the models "selected" portion but it gives me result very far to it which is highlighted with red in the screenshot.
View 1 Replies
View Related
Jan 8, 2013
In the weldment of a crane boom i have different parts. Some are identical, but (1:1) mirrored.ipt. Then I merge them in the BOM in order to set the qty on "2" in the partslist.
Here the error occurs: in the "mass" field in the parts list says "varies".
This keeps me from generating a good partslist and the total mass of the weldment maybe messed up. I personally think it has something to do with the fact that the parts are sheetmetals. i.e when I look atthe Physical properties of the folded / unfolded (of the SAME .ipt) they differ in the same way i see in the BOM.
View 9 Replies
View Related
Jul 6, 2012
i am using Autodesk Inventor 2012 to design a pipeline structure. I have a problem when mirroring a 3D sketch with applyed frames. the problem is that if after the mirror operation i edit the original sketch, the modifications are not inherited by the mirrored part of the structure. in particular when i mirror a 3D assembly and edit the original assembly the modifications are made also in the mirrored part but the program does it in a wrong way as long as the constraints are not satisfied and the position of the parts are not the same as the original assembly.
How to mirror an object and preserving the link between the original and the copy in order to make modifications to all the parts mirrored in an easy way?
View 1 Replies
View Related
May 17, 2013
I cut a curved profile using extrusion and mirrored it about the original plane. But It doesn't cut thoroughly ? there is still a surface of the rarer side of the part ?
the original extrude cut was "Through All".When do the same cut gving a distance...it mirrors perfectly..
View 2 Replies
View Related
May 18, 2011
Is it possible in inventor to make an assembly mirror array? I can't seem to make it keep from just copying the parts. It works OK for circular and rectangular patterns.
View 9 Replies
View Related
Jan 7, 2013
If I create circle and then mirror that cicle in the sketch. How can I then edit that mirror?
When I create pattern in sketch I can edit pattern afterward but cant figure how to edit mirror (except deleting constrains).
Is there way to do it?
View 2 Replies
View Related
Sep 3, 2013
This is a part from an inmported step file. The Inv assembly consists of 1047 part files.
I did the following:
Immediatley grounded all parts in the assembly.Opened the 8 (of the 1047) parts that came through as surfaces, all the rest are solid.
Found missing faces on all of them. I found the most useful tool was to create a series of section planes and do sketches with projected cut edges. Then export the sketches and open in autocad. This way I can see a simple line section view.
I set about replacing the missing faces to get the surface to a solid.After a few attempts I managed what you see below, a solid part in the browser. The part will now mirror as a new solid, but will not join. I have tried mirror as single solid, derive as single solid and combine. All Fail.
View 1 Replies
View Related
Sep 21, 2011
Is there an easy way to mirror a part? I drew this from a sample and need the opposite handing.
View 1 Replies
View Related
Jun 22, 2013
Inventor 2014 LT / have run into a problem in a throw-away project I"m working on.
A simple example is to create a piece of 3x5x.125 flat bar, add a sketch giving you a bend line and bend the end of it. Now try to mirror the whole thing giving you a 3x10x.125 flat bar bent on both ends.
FWIW: My project isn't this simple - I know I can just make the FB and bend both ends ... this is an example of mirroring a bend not working.
View 2 Replies
View Related
Oct 25, 2011
Am guessing inventor does not allow getting the constraints when you mirror a part..but is there a work around or easy way to copy the constraints.
View 9 Replies
View Related
Jul 17, 2013
I am attempting to modify a component that I already have. Part of the modifications I am attempting to do involves mirroring some of the part's features. However, when attempting to mirror the component I receive the error message attached to this post: "Select set contains object that cannot be patterned". I have been fooling around with this part and a few others and this appears to be an error message that comes up for mirroring or patterning (circular/rectangular) complex shaped parts. What specifically is the issue here and how can I bypass this error message?
View 8 Replies
View Related
May 15, 2013
Inventor doesn't allow me to mirror a part as a different part. In normal cases, I can mirror a part within an assembly and it allows me to give a new filename. Now, it thinks it is a standard part and wants to reuse it even if I uncheck the "reuse standard content and factory parts" box. How can I turn that off? Or mirror the component?
Software: Inventor Series 2011 SP1 x64
OS: Vista Business x64
CPU: E6400
RAM: 2*2Gb GeIL
VGA: Quadro FX 550
View 3 Replies
View Related
Oct 3, 2013
I am trying to do a detail view on an isometric and i would like a long sausage shape angled with the isometric. the detail views are round or rectangular horizontal, i would even be happy with a rectangle on the piss in line with the isometric.
i tried putting on a sketch of my sausage shape and performing a breakout view but it will only take away the components within the sausage, i want to flip this. I then tried putting a big rectangle on the same sketch in the hope that it would leave the sausage as an island, (much like a hatch) .
View 3 Replies
View Related
Sep 10, 2012
Any work around for rectangular patterns in assemblies?
I want to pattern a screw using an existing Part Feature Pattern; I have figured out depending on how the part is assembled you get two outcomes and if the part is mated opposite side to how the feature was patterned you get the parts going the wrong way (see attached pic).
Is there a “flip direction” option anywhere or do you just have to be super diligent on how the seed feature orientation is in relation to the assembled pattern?
View 9 Replies
View Related
Dec 7, 2012
Is there a way to get the mirrored hole to go all the way through both parts of the mirrored solid bodies.
I do realize that I can create the hole in a seperate feature, after the mirror. It will only let you select one 'solid' during the mirror command. Here is a simple .ipt to demonstrate the issue.
View 9 Replies
View Related
Nov 5, 2012
create a plane and mirror a solid?
I am planning to have the following workflow:
Plane creation:
Through the z-axis and at an angle of 7,5° to the XZ-Plane
Naming the plane - Mirror Plane
Turning off the plane visibility
Mirror solid:
Add mirrored solid to the existing solid
Here is a sample ao the code...
Dim oDoc As PartDocument
oDoc = ThisApplication.ActiveDocument
Dim oCol As ObjectCollection
oCol = ThisApplication.TransientObjects.CreateObjectCollection
'This does not work...
oCol.Add(oDoc.ComponentDefinition.SurfaceBodies(1))
'Here I want to create a new plane
Dim oPlane As WorkPlane
oPlane = oDoc.ComponentDefinition.WorkPlanes(1)
Dim oMirror As MirrorFeature
oMirror = oDoc.ComponentDefinition.Features.MirrorFeatures.Add(oCol, oPlane, False, kOptimizedCompute)
I have also attached a simplified part file where the code has been copied inti the iLogic browser
View 1 Replies
View Related
Dec 29, 2012
I decided to model an industrial iron caster wheel with polyurethane tread, and all went well. Tonight I added three ribs to one side of the caster wheel, which looks great, but I would rather not repeat the process on the other side because of all the fillets and such which would have to be repeated.
Is it possible to split the wheel down the middle and then mirror the side with the ribs? I saw that I can split the model with a plane, but I can't figure out how to remove the geometry on the left side of the plane.
View 9 Replies
View Related
Jun 14, 2012
Whenever I am using mirror command in assly . The mirrored part do not get constraint again I have to use the constraint or I have to make that part grounded.
View 4 Replies
View Related
Mar 12, 2012
I have used the derive component command to mirror parts many times but each time in the past I have had a desire for that part to be linked to the one I mirrored. I have a new situation where I would like to mirror a skeleton part file that I used on one assembly to make a new assembly.
For example, I used the part attached below to create a stair frame for a steel framed platform I am working on. It consists of geometry, work features, and sketches that represent the nosing line, guardrail, stair stringers, etc.
I have another stair on the other side of the platform that needs to be a mirror image of this one plus a few unique modifications. The new assembly cannot be "linked" to the other one as each of these assemblies needs to be modified independently.
How can I mirror this part to reuse work I have already done without having to create a new skeleton file from scratch? Using the derived part method, then breaking the link makes all of my sketch entities unconstrained.
View 2 Replies
View Related
Jun 11, 2012
Is it possible to remove associativity between mirror object.like we have in autocad.?
I want to delete source object without deleting mirror object.
View 6 Replies
View Related
May 13, 2011
How do I mirror a numbers of parts in an assembly.
There is a MIRROR icon but it's fuction is based on COPY.
I would like a MIRROR comand based on PATTERN not COPY.
View 2 Replies
View Related
Mar 11, 2013
I mirrored a sheet metal the length in the folded model carried on to the mirrored part, but i cant get the dimension of the flat part of the original part. Is there a way to do this.?
inventor 2011
vault pro 2012
View 9 Replies
View Related
